Search

Abstract With the progression of many shale gas wells in the Sichuan-Chongqing region of China into the middle and late stages of exploitation, the problem of sand production in these wells is a primary factor influencing production. Failure to implement measures to remove sand from the gas wells will lead to a sharp decline in production after a certain period of exploitation. Moreover, As the amount of sand produced in the well increases, the production layer will be potentially buried by sand. To boost the production of shale gas wells in the Sichuan-Chongqing region and improve production efficiency, a novel downhole jet sand-washing device has been developed. Upon analyzing the device's overall structure, it is revealed that the device adopts a structural design integrating a jet pump with an efficient sand- washing nozzle, providing dual capabilities for jet sand- washing and sand conveying via negative pressure. To enhance the sand- washing and unblocking performance of the device, various sand- washing fluids and the structures of different sand- washing nozzles are compared for selection, aiming to elevate the device's sand- washing and unblocking performance from a macro perspective. Subsequently, drawing on simulation and internal flow field analysis of the device's sand- washing and unblocking process through CFD and the control variable method, it is ultimately found that the length diameter ratio of the cylindrical segment of the nozzle outlet, the outlet diameter, and the contraction angle of the nozzle greatly influence the device's sand- washing and unblocking performance. And the optimum ranges for the length-diameter ratio of the cylindrical segment of the nozzle outlet, the outlet diameter, the contraction angle of the nozzle, and the inlet diameter are 2 to 4, 6 mm to 10 mm, 12° to 16°, and 18 mm and 22 mm, respectively. The findings of the research not only provide new insights into existing sand removal processes but also offer a novel structure for current downhole sand removal devices and a specific range for the optimal size of the nozzle.

Conventional conductivity methods for measuring the void fraction in gas-liquid multiphase systems are typically affected by accuracy problems due to the presence of fluid flow and salinity. This study presents a novel approach for determining the void fraction based on a reciprocating dynamic conductivity probe used to measure the liquid film thickness under forced annular-flow conditions. The measurement system comprises a cyclone, a conductivity probe, a probe reciprocating device, and a data acquisition and processing system. This method ensures that the flow pattern is adjusted to a forced annular flow, thereby minimizing the influence of complex and variable gas-liquid flow patterns on the measurement results; Moreover, it determines the liquid film thickness solely according to circuit connectivity rather than specific conductivity values, thereby mitigating the impact of salinity. The reliability of the measurement system is demonstrated through laboratory experiments. The experimental results indicate that, in a range of gas phase superficial velocities 5–20 m/s and liquid phase superficial velocities 0.079–0.48 m/s, the maximum measurement deviation for the void fraction is 4.23%. [ABSTRACT FROM AUTHOR]