Search

The purpose of this study is to analyze the rotational speed characteristics of a spherical turbine start-up process, and the rotational speed characteristic of the spherical turbine is studied by numerical simulation. In order to ensure the reliability of the numerical simulation, the numerical simulation results at different flow rates are compared with the experimental results, and the results show that it is feasible to investigate the rotational speed characteristics of the spherical turbine using numerical simulation. The numerical results demonstrate that the start-up process of the spherical turbine can be separated into two stages: the start-up acceleration stage and the transition stage, which are followed by periodic fluctuations of the rotational speed. In addition, when the flow rate is 8 m3/h , the spherical turbine can self-start under the load coefficient (Bg) if less than 3×10−5. If the Bg is larger than 3×10−5 , the turbine fails to start-up. The failed start-up shares characteristics: the turbine only moves forward and backward alternately in a small angular range. However, eventually, the applied load torque dominates, and the turbine starts to reverse. It is found that the flow rate and the turbine rotational speed present a linear relationship under the no-load operating condition. [ABSTRACT FROM AUTHOR]

In this paper, we conduct a comprehensive numerical investigation of a ducted wind turbine under various rotational speeds, focusing on aspects such as boundary layer thickness and momentum thickness. Our study utilizes advanced computational fluid dynamics techniques to assess the intricate flow characteristics and aerodynamics of the ducted wind turbine, providing a detailed understanding of its operation under different speed conditions. The primary objectives are to comprehend the effect of the wind turbine's rotational speed on the boundary layer thickness and the momentum thickness, two crucial parameters influencing the turbine's performance and efficiency. Our findings reveal a significant correlation between the increase in rotational speed and the growth of flow separation, a phenomenon typically indicated by an expansion in the area of negative wall shear stress. This research contributes valuable insights into the behavior of ducted wind turbines at varying rotational speeds, and the acquired knowledge could potentially be utilized in designing and improving wind turbine systems to achieve better performance and enhanced operational efficiency. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to test and analyze the friction torque of double-row angular contact ball bearings under vacuum or ordinary pressure environment, horizontal or upright installation mode, and different rotational speeds, and to provide theoretical bases for the development of aerospace equipment. Design/methodology/approach: The experiments were carried out to investigate the effects of vacuum or ordinary pressure environment, horizontal or upright installation mode and different rotational speeds on bearing friction torque. To explore the relationship between working conditions and bearing friction torque, firstly, based on the generation source of friction torque, the test principle was determined, a test system was developed and the reliability of data was verified. Secondly, the friction torque of bearing was tested, and the values under various working conditions were obtained. Finally, this paper compared and discussed the test results. Findings: The test results show that the friction torque value of vacuum environment horizontal installation condition is the largest at different rotational speeds, and the rotational speed has the most significant influence on the friction torque. Originality/value: The friction torque test system of double-row angular contact ball bearing under vacuum environment was designed and built. The influence rules of vacuum or ordinary pressure environment, horizontal or upright installation mode and different rotational speeds on bearing friction torque were obtained. Peer review: The peer review history for this article is available at: http://dx.doi.org/10.1108/ILT-08-2023-0259 [ABSTRACT FROM AUTHOR]

This study addresses the pressing need for eco-friendly potable water production, exploring the promising avenue of solar distillation. To overcome limitations in traditional systems, the author introduces the modified spherical solar still (MSSS), featuring a rotating ball within the design. A comprehensive experimental investigation compared MSSS performance with reference spherical distiller (CSSS) across energetic, exergetic, economic, and environmental (4E) dimensions. Key factors explored included: rotation speeds (0.2–1.2 rpm), wick material on the rotating ball, and thermal storage material (PCM) beneath the ball (desert sand, copper grits, or their mixture). The optimal MSSS configuration was identified: Rotation speed: 0.8 rpm (40 % yield increase), wick material: 57 % distillate enhancement at 0.8 rpm, and combined, these conditions yielded a remarkable 103 % distillate improvement compared to CSSS (7160 vs. 3525 mL/m2.day) and an efficiency of 59.5 %. Exergy efficiency also surpassed CSSS: 4.2 % for MSSS with PCM vs. 3.1 % for CSSS. Notably, the cost per liter of distilled water dropped significantly: $0.024 for MSSS with PCM compared to $0.066 for CSSS. Environmentally, MSSS with PCM saved 27.7 tons of CO 2 annually. Lastly, the enviroeconomic parameter (Z′) rose from 335 for CSSS to 365 for MSSS with PCM. • Study assessed modified spherical solar still (MSSS) with various speeds and PCMs. • MSSS with PCM at 0.75 rpm showed 103 % improvement, 59.5 % efficiency. • Exergy efficiencies at 0.75 rpm with PCM: CSSS 3.1 %, MSSS 4.2 %. • Cost analysis: CSSS $0.066/L, MSSS $0.043/L, MSSS with PCM $0.024/L. [ABSTRACT FROM AUTHOR]

Drilling is one of the most important surgical steps and bone fracture repair. In this step, the temperature may exceed 47 °C and thermal necrosis may occur, which has irreversible consequences. Knowing the amount of heat transferred to the bone and its changes can be effective in recognizing this heat damage and minimizing it. In this research, it was tried to estimate the amount of heat flux entering the bone during the drilling process using the inverse heat transfer method. Drilling tests were performed on cow bone samples and the temperature changes at the hole location were measured using the inverse heat conduction transfer method. The amount of heat input was estimated. The K-type thermocouple is used to measure temperature. The diaphysis fragment of the cow's thigh (middle part), which has a length of about 90 mm and the thickness of the cortical bone in this range is about 8–10 mm, was used. Also, to ease the tests, the beginning and end parts of the fresh femur were cut with a saw. The results show that the maximum heat flux occurs earlier than the maximum temperature. It was observed that the maximum heat flux and the maximum temperature rise with the increase of the rotational speed and the diameter of the tool. As the feed speed rises, first the maximum temperature and maximum heat flux decrease and then increase. By tripling the feed speed, the maximum heat flux decreases by about 20%. The highest percentage rise in temperature and heat flux occurs with a rise in rotational speed, which is around 130–140%. After the rotational speed, increasing the drill diameter increases the temperature up to about 66.7%. The results can be used to prevent thermal necrosis because the maximum heat flux is visible before the occurrence of the maximum temperature. [ABSTRACT FROM AUTHOR]

• Optimised three port, radial-flow gas wave ejector with curved channel is presented. • Designed and established the first radial-flow gas wave ejector platform. • A study on the impact of rotational speed on device performance was conducted, revealing a potential enhancement of 13.25 % in device ejection rate and a corresponding increase in device total efficiency by 11.86 %. • Through simulation validation, it is observed that the flow losses of the equipment exhibit a trend of initial reduction followed by subsequent increase as the rotational speed is elevated. The gas wave ejector (GWE) is a device that enables energy transfer between gases at different pressures through pressure waves. We conduct an experimental and simulation study on a novel radial-flow GWE, named DUT-R1, designed to harness centrifugal force to enhance mass and energy transfer efficiencies. Considering the significant influence of rotational speed (n) on the pressure waves and flow losses, we examine the relationship between the n of the DUT-R1 and both its ejection rate (ξ) and total efficiency (η T). Experimental data demonstrate that the GWE can attain the highest ξ and η T at an optimal designed rotational velocity (n d) when the pressure ports remain fixed. Simulations suggest that the primary cause can be attributed to the disruption of the ideal wave system. And when the equipment is equipped with ports matched to the n d , a consistent increase ξ is observed as the n d increases from 2000 r/min to 4000 r/min, resulting in a maximum improvement of 13.25 %. The simulation results demonstrate that increasing n enhances the suction capacity of the equipment through the inputting of shaft power (P). However, η T initially increases and then decreases as the n d increases, with a maximum improvement of 11.86 %. The simulation provides an explanation for the observed variations in η T during the experimental investigation by illustrating that flow losses initially decrease and then subsequently increase with an increasing value of n. [ABSTRACT FROM AUTHOR]