Search

At the beginning of the 20th century, the eclectic artist Mariano Fortuny y Madrazo patented two innovative methods for polychrome printing on fabrics and textiles, giving life to Fortuny fabric production in Venice. The first patent was related to colour application, while the second to a special machine that allows continuous printing using cylindrical rollers. Despite the descriptions, the methodology and materials used remain a secret. In collaboration with the Fortuny Museum in Venice, this research aimed at studying and identifying the different steps of Fortuny printing methodologies. Printing matrices, fabrics and raw materials found in the artist’s studio were analysed in a multi-analytical campaign through digital microscopy, X-ray fluorescence (XRF), Fourier-transform infrared spectroscopy in attenuated total reflectance (FTIR-ATR), μ-Raman spectroscopy and gas chromatography–mass spectrometry (GC–MS). Three main pigments were identified in paper samples: ivory black, a copper-based pigment, and a carbon black pigment with ultramarine for blues. The pigments were bound with linseed oil and colophony in varying proportions. Polychrome silk fabrics were dyed with a base colour, and then the coloured patterns were superimposed by continuous printing. Prussian blue was identified as one of the textile inks. Results provided a better understanding of printing methodology.

Conventional multi-cylinder drying of paper and board involves a mixture of conductive drying from steam-heated dryer cylinders and convective drying by the flow of heated air over the surface of the paper web in the pockets. Pocket ventilation is a critical component in assisting heat and mass transfer during the drying process but is the primary contributor toward removing evaporated water from the web. Air temperature, velocity, and humidity are critical parameters involved in the convective drying process. This paper covers an experimental study involving the design and development of a small lab-scale setup for convective drying of various grades of paper and board, monitoring multiple parameters like paper temperature, moisture content, air humidity, temperature, and velocity measured in situ as the drying proceeds with continuous and accurate sampling capabilities for all parameters in the sample and the system. Instantaneous drying rates, heat, and mass transfer coefficients were also deduced for every time step till the paper completely dried. Furthermore, the coefficients obtained were also reported in the form of dimensionless correlations, and the results were compared against traditional correlations used in the modeling of paper drying. This data will be useful in process development, modeling, design, and the paper drying process simulation. [ABSTRACT FROM AUTHOR]

At the beginning of the 20th century, the eclectic artist Mariano Fortuny y Madrazo patented two innovative methods for polychrome printing on fabrics and textiles, giving life to Fortuny fabric production in Venice. The first patent was related to colour application, while the second to a special machine that allows continuous printing using cylindrical rollers. Despite the descriptions, the methodology and materials used remain a secret. In collaboration with the Fortuny Museum in Venice, this research aimed at studying and identifying the different steps of Fortuny printing methodologies. Printing matrices, fabrics and raw materials found in the artist's studio were analysed in a multi-analytical campaign through digital microscopy, X-ray fluorescence (XRF), Fourier-transform infrared spectroscopy in attenuated total reflectance (FTIR-ATR), μ-Raman spectroscopy and gas chromatography–mass spectrometry (GC–MS). Three main pigments were identified in paper samples: ivory black, a copper-based pigment, and a carbon black pigment with ultramarine for blues. The pigments were bound with linseed oil and colophony in varying proportions. Polychrome silk fabrics were dyed with a base colour, and then the coloured patterns were superimposed by continuous printing. Prussian blue was identified as one of the textile inks. Results provided a better understanding of printing methodology. [ABSTRACT FROM AUTHOR]

Accurately assessing the color quality of printed products becomes intricate when optical brightening agents (OBAs) are introduced in papers, as diverse interactions occur among different ink pigments and papers containing OBAs due to variations in ink formulation chemistries. Specifically, alkali‐based pigments, commonly used as spot colors, are carefully formulated to ensure consistency across production batches. The presence of OBAs, which absorb ultraviolet light and emit it in the visible spectrum, significantly affects color perception and accuracy on paper when interacting with these inks. This research marks an initial investigation into how OBAs in paper influence the color accuracy of five distinct alkali‐based spot color paste inks using a Little Joe ink proofer. The research examines the physical, optical, and colorimetric characteristics of two paper samples‐one with OBA and one without‐ and analyzes the colorimetric changes occurring during the ink drying process. The results indicate that reflex blue, purple, and violet spot colors achieved acceptable delta E (ΔE00) value of below 3 on non‐OBA paper, with rubine red being on the borderline at 3.1 after 48 h. In contrast, purple, rhodamine red and violet achieved acceptable ΔE00 below 3 on high OBA paper. The distinct behavior exhibited by certain inks led to the conclusion that achieving a consistent proofing procedure across diverse alkali‐based ink formulations is impractical. [ABSTRACT FROM AUTHOR]

Hemp hurd fiber, a low-value waste stream from the hemp industry, has potential downstream applications as an alternative to non-renewable plastics for single-use food service ware and packaging applications. Packaging paper substrates made from chemically pulped hemp hurd, mixed in varying ratios with bleached thermomechanical radiata pine pulp were developed and tested. Handsheets were characterized using several mechanical property tests including tensile strength, tearing resistance, burst strength, short-span compression, ring crush, together with Gurley air resistance, contact angle, and Cobb60 tests. Generally, addition of hemp hurd fibers significantly improved handsheet mechanical properties. Hot-pressing of the handsheets so as to approximate molded fiber thermoforming further enhanced their performance, with pure hemp hurd handsheets having the highest mechanical properties and barrier performance. A prototype was successfully thermoformed from hemp fiber, demonstrating overall feasibility of this fibre source for molded fibre objects.

This article asks whether the slow process of divesting Indian native schoolteachers of their traditional authority was only about new concepts and representations of education and knowledge. Following the methodological idea of constellations of affordances, emphasising a relational ontology, the article discusses whether changes in the shape and the relations of objects in Indian classrooms together with the arrival of new objects may have played a silent role in the process of erosion of schoolteachers' authority. Based on a wide range of official and missionary sources, but also referring to individual native voices, the article reconstructs more pervasive and subtle transformations of native elementary classrooms, focusing on surfaces for writing and on "books". The article argues that shifts in the materialities of elementary native schooling took place that repositioned old "gurus" in an unfavourable light before the take-off of teacher training institutions would provide for new definitions of their role as schoolmasters. [ABSTRACT FROM AUTHOR]

La transición hacia el uso del papel para la enseñanza de la escritura en las escuelas elementales públicas en México no fue sencilla. Al finalizar el siglo XIX, se había cuestionado el uso de las pizarras por el riesgo que representaban para la salud, pues muchas veces los estudiantes borraban sus escritos con saliva y el material con el que estaban fabricadas no siempre guardaba las especificaciones necesarias, además el ruido al escribir era insoportable. En cambio, el papel, desde el punto de vista higiénico, pedagógico y estético, fue considerado un material superior frente a la dureza de la pizarra, el brillo de la superficie y la poca precisión que se obtenía en el trazo de las letras. Derivado de este planteamiento, se vislumbró seriamente la posibilidad de la adopción de papel en las escuelas oficiales. Sin embargo, este material era escaso y muy caro. Hacia el cambio de siglo, sólo dos fábricas de papel podían surtir a las escuelas y era necesario que abarataran el precio, que el sistema de distribución garantizara el abastecimiento y que el suministro fuera continuo. Este artículo analiza el inicio del proceso de reconversión de una tecnología para la enseñanza como era la pizarra por el papel. Analizo el gasto que significó y cómo esta modificación fue resultado de una multiplicidad de relaciones sociales, culturales, económicas y políticas que se entrecruzaron para dar una nueva configuración del tiempo, el ruido y los valores establecidos en el salón de clases. The transition to the use of paper in public elementary schools in Mexico was not easy. At the end of the nineteenth century, the use of slates had been questioned due to the health risk they represented since students often erased their writing with saliva and the material with which the slates were made did not always meet the necessary specifications. On the other hand, paper, from a hygienic, pedagogical and aesthetic point of view, was considered a superior material compared to the hardness of the slate, the shine of the surface and the lack of precision obtained in the tracing of the letters. Derived from this approach, the possibility of changing materials in official schools was seriously envisioned. However, the paper represented a very high cost. Only two paper mills could supply the schools and it was necessary to lower the price, and guarantee the supply by enhancing the distribution system. This article analyses the beginning of the conversion process of a technology for learning to write such as the slate for paper. I analyse the expense that it meant for the authorities and families, how the change was the result of a multiplicity of social, cultural, economic and political relations that intersected to give a new configuration of time, noise and established values in the classroom. [ABSTRACT FROM AUTHOR]

The global overabundance of electronic waste and ever‐increasing concerns regarding the energy‐and material‐intensive manufacturing processes associated with traditional electronics are driving the development of solution‐processed, degradable electronics. Of note, the industry‐dominating prevalence of harmful lead‐based materials in sensing and actuating devices drives the push for more eco‐friendly solution‐processed piezoelectric systems. Yet current ecofriendly multi‐material printing processes are limited by both the conventional challenges of multilayer processes as well as the low‐temperature thermal constraints of biodegradable materials. Herein, a novel approach for fabricating fully printed, sustainable piezoelectric transducers on paper substrates is presented. Low‐temperature screen‐printing processes are used to integrate non‐toxic KNbO3 layers with degradable carbon‐ or zinc‐based conductive inks into devices. The influence of electrode material on device characteristics is assessed, with effective piezoelectric coefficients reported as high as 4.6 pC N−1 and 5.1 pC N−1 for devices with carbon and zinc electrodes respectively. The potential of the developed technology is then demonstrated through the first‐ever instance of fully printed piezoelectric force sensors and acoustic speakers comprised entirely of green materials. By demonstrating entirely printable green piezoelectric devices compatible with various electrode materials, this work serves as a step towards developing more complex sustainable piezoelectric technologies in the future. [ABSTRACT FROM AUTHOR]

This paper aims to investigate a linguistic issue related to Sari Al-Deen Al-Durori (d. 1066 A.H), a renowned Arab linguist in the 11th century of the Islamic calendar. Despite being relatively unknown to modern scholars and researchers, this linguist has left behind a valuable knowledge legacy and held a significant scientific standing among his contemporaries. The focus of this study is on 'Baiti A-Raqmatain', a topic that has been subject to various interpretations by Arab linguists, including grammarians. In this paper, the author presents ten different perspectives addressing the problems in 'Baitia A-Raqmatain'. Additionally, the author introduces a syntactic interpretation and meaning, along with three new opinions that have not been previously discussed in the literature. I was inspired to write on this topic after reading several valuable manuscripts by renowned Arab scholars covering various areas of knowledge. Among them, I came across the works of Sari Al-Deen Al-Durori, an Arab intellectual who, in my opinion, has not received the recognition he truly deserves. Sari Al-Deen Al-Durori was a prominent scholar of the 11th Hijri century and has left behind a scientific heritage that is worthy of study and research. The study is divided into two sections. The first section focuses on discussing the author himself, including his background, birth and death dates, his jurisprudential and doctrinal school, scholarly reputation, influential teachers, disciples, and written works. Within this section, I also delve into the manuscript itself, examining its attribution to Sari Al-Deen, the author's methodology, language and style, as well as its form. I conclude this section with a comprehensive systematic review of the investigation. The second section of the study is dedicated to the transcription and documentation of the analyzed texts, including commentary, following commonly accepted investigation rules. I wrap up this section by providing a list of references used throughout the study. [ABSTRACT FROM AUTHOR]

Flow and spontaneous imbibition phenomena in porous media are important for various industrial applications, including printing and medical lateral flow assays. Their quantitative characterization is important to better understand and select the appropriate raw materials. However, standard methods often require time-consuming tests, and/or expensive equipment. Different time scales must be considered, limiting the range of possible characterization tools. A novel experimental approach based on image analysis for characterizing spontaneous imbibition processes is presented. Hence, ultra-fast diffusion may be quantitatively characterized. Models are issued from the literature to consider physical phenomena at small (milliseconds) and medium range (seconds) of time scales. The obtained experimental data fit with theoretical results, providing valuable insights into the understanding of fluid flow behavior at different time scales. Furthermore, the identification of some physical properties for either the fluid, or the substrate, based on the theoretical models are possible, as the contact angle, which remains to be otherwise challenging. This study contributes to bridging the gap between spontaneous imbibition and capillary phenomena at different time scales, their modeling, and a characterization of material and/or fluid properties paving the way for enhanced understanding and control of fluid behavior in porous media. Different papers are considered to illustrate the method. [ABSTRACT FROM AUTHOR]

Identifying the factors that influence the citation of articles helps authors improve the impact and reach of their research. Analysis of publications in the Journal of Fish Biology between 2008 and 2021 revealed that variables such as the number of keywords, abstract length, number of authors, and page length were associated with higher impact papers. These trends applied to both review and regular papers. These findings suggest that papers that are more informative, have higher numbers of authors, and have more keywords are more likely to be cited. Adoption of some simple "best‐practice" behaviors can improve the likelihood that a paper is cited. [ABSTRACT FROM AUTHOR]

This article presents a history and stylistic analysis of the avant-garde furnished apartment-studio of the Italian Futurist Giacomo Balla (1871-1958), commonly known as Casa Balla. The decor and the painterly interior design of the flat portray the utopian premise of 1920s Futurism, which aimed at a modern synthesis of the arts and their complete integration into reality, in an intimate way. The author of the essay describes the current state of the "Balla House", which, after many years of oblivion, has been restored and opened to the public in a new arrangement in 2021. [ABSTRACT FROM AUTHOR]

Cellulose nanocrystals (CNCs) and chitosan (Cht) have been studied extensively for oxygen and water vapour barrier coatings in biodegradable, compostable or recyclable paper packaging. However, rare studies have been performed by using scalable, inexpensive, and fast continuous slot-die coating processes, and none yet in combination with fast' and high-throughput near-infrared (NIR) light energy drying. In this frame, we studied the feasibility of a moderately concentrated (11 wt%) anionic CNC and (2 wt%) cationic Cht coating (both containing 20 wt% sorbitol related to the weight of CNC/Cht), by using plain and pigment pre-treated papers. The effect of coating parameters (injection speed, dry thickness settings) were investigated on coating quantity (dry weight, thickness) and homogeneity (coverage), papers' structure (thickness, grammage, density), whiteness, surface wettability, barrier (air, oxygen and water vapour) properties and adhesion (surface strength). The coating homogeneity was dependent primarily on the suspensions' viscosity, and secondarily on the applied coating parameters, whereby CNCs could be applied at 1–2 times higher injection speeds (up to 80 mL/min) and versatile coating weights, but required a relatively longer time to dry. The CNCs thus exhibited outstanding air (4.2–1.5 nm/Pa s) and oxygen (2.7–1.1 cm3 mm/m2 d kPa) barrier performance at 50% RH and 22–33 g/m2 deposition, whereas on top deposited Cht (3–4 g/m2) reduced its wetting time and improved the water vapour barrier (0.23–0.28 g mm/m2 d Pa). The balanced barrier properties were achieved due to the polar characteristic of CNCs, the hydrophobic nature of Cht and the quantity of the applied bilayer coating that can provide sustainable paper-based packaging. [ABSTRACT FROM AUTHOR]

Copyright of Revista Foco (Interdisciplinary Studies Journal) is the property of Revista Foco and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Enhancing paper hydrophobicity is of key importance for many paper-based applications. Fatty acids or vegetable oils and their derivatives replace environmentally harmful conventional coating materials but still require challenging chemical reactions for covalent attachment onto paper. Here, we show that simple storage of olive oil-coated cotton linter paper at 70 °C and subsequent Soxhlet extraction is able to endow paper with hydrophobic properties, reaching water contact angles above 130°. In-depth chemical and morphological analytics show the relevance of temperature and air accessibility during the aging process compared with aging at ambient temperature and under the exclusion of oxygen, underlining the importance of assessing a coating's long-term performance and stability under diverse storage conditions. Simple storage of vegetable oil-coated paper at elevated temperatures followed by extraction proves to be an easy way to produce stable covalently attached hydrophobic paper coatings with exceptionally low coating amounts. [ABSTRACT FROM AUTHOR]

Flexible and small-scale energy storage technologies are critical for future applications such as wearable electronics. In this context, paper has emerged as a lightweight, low-cost, and ecologically friendly flexible substrate for energy storage devices. This paper presents a simple method for fabricating a micro-supercapacitor (MSC) using a wax printing approach that can achieve high resolution without requiring complex processes. In addition, the developed MnO2–Au-paper (MAP) microelectrodes with high porosity exhibit enhanced charge and ion transfer while maintaining a stable flexibility. The solid-state micro-supercapacitor delivers a very large areal capacitance of 624.32 mF cm−2 at 0.2 mA cm−2 and is stable under external stress. The highest energy and power densities obtained for the present MSCs (55.5 μWh cm−2 and 1.59 mW cm−2, respectively), are much larger than those previously reported for pseudocapacitive MSCs, including flexible ones. [ABSTRACT FROM AUTHOR]

The dimensional stability of paper during printing is crucial for ensuring production quality and runnability. However, inkjet printing faces inherent challenges due to the hygroscopic nature of paper and the use of water-based inks. Despite freshly printed sheets are flat, a considerable development of paper curl is often observed during storage. In this study, we establish the link between the migration of ink co-solvents and the long-term curl development of printed paper. A4 paper sheets were sprayed with a water-glycerol model ink and changes in the sheet's curvature were monitored using a 2D-laser sensor. We also investigated glycerol migration by splitting the sheets into layers and determining the glycerol distribution using high-performance liquid chromatography. Our results demonstrate the development of curl during storage as well as glycerol migration in thickness direction of the sheet, both on a comparable timescale. We thus propose that long term curl in inkjet printing can be caused by z-directional migration of the co-solvent (glycerol) over time. This study enhances understanding of the physical mechanisms that drive the long-term curl phenomenon in inkjet-printed sheets. The results can be used to optimize printing processes, allowing for the production of higher quality printed products with greater dimensional stability.

Cellulosic-based materials such as hemp fabric and paper have combined characteristics of renewability, biodegradability, flexibility, and recyclability. However, regular products are not suitable for use in unconventional applications due to inherent limitations, and accordingly, enabling new capabilities is a necessity. To this end, the conversion of regular hemp fabric and paper into high-strength products with hydrophobic function via surface engineering was explored. The fluorinated waterborne polyurethane (FWPU) emulsions were first synthesized as functional coatings by in-situ polymerization. The structure and properties of the FWPU emulsion and film were characterized by FTIR, XRD, SEM, TG, and XPS. The results showed that the grafting of perfluorooctanol imparts WPU film excellent hydrophobicity, and the water contact angle increases from 71.2° to 105.9°. After the FWPU coating, the water contact angles of the hemp fabric and paper increase from 0° to 117.1° and 112.8°, respectively. Quite encouragingly, the coating generation of waterborne polyurethane-derived functional additives led to the increase of mechanical strength by more than 23% and 82%, in the case of qualitative filter paper and hemp fabric. Meanwhile, the folding strength of filter paper is increased by 132 times. Overall, this functionalized waterborne polyurethane coating would direct paper and hemp fabric toward diversified applications. [ABSTRACT FROM AUTHOR]

The paper and pulp industry stands out to be one of the industries that are growing at a fast pace. Besides their characteristics such as high water consumption of 695.7 million m3 per year and subsequent high energy consumption, there are plenty of environmental impacts arising from this industry. Approximately 300 different types of harmful organic pollutants such as phenols, dioxins, and other organic substances are the significant effluents of the paper and pulp industry. As per the regulations set by the world health organization (WHO), the permissible limit of such pollutants is less than 1 ppm. Since the complete degradation of these pollutants is difficult to achieve using conventional techniques, advanced oxidation processes (AOPs) are widely being used as promising alternatives. On the other hand, depleting non-renewable energy resources are forcing industries to look for energy-efficient technologies. Photocatalysis is one such AOPs, which has the potential to solve the energy-wastewater nexus and is the primary focus of this review in terms of waste treatment from the paper and pulp industry. The photocatalytic materials induce photoreactions by receiving photon energy from light. However, harnessing light energy to the fullest is a challenge owing to the limited share of UV spectrum in sunlight. Different composite photocatalysts at different loadings, pollutant concentrations, and contact time along with their respective efficiencies are reported. The enhancement in thermodynamic driving force due to shift in Fermi energy levels with a suitable example is explained. The dependence of photocatalysis on various factors such as organic species, temperature, and light intensity makes it tough to predict the precise kinetic model in real-life experiments. The hydrogen production from the degradation of organic pollutants was discussed vividly and by optimization of the processes, an estimated amount of 0.45% of the total world's energy could be produced from the paper and pulp industry alone. [ABSTRACT FROM AUTHOR]

This study explores the efficacy of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide and 1-hexyl-3-methylimidazolium chloride as cleaning agents for aged cellulosic artifacts. A 10% v/v acetone solution of these ionic liquids (ILs) effectively removes the brownish-yellow color of aged paper in a 10 min immersion treatment. Colorimetric analysis shows a remarkable increase in lightness (L*) by up to 40% and a decrease in red/brownish tones (b*) after IL treatment. The cleaning process also deacidifies the paper, shifting the pH to neutral-slightly basic levels and enhancing its long-term stability. Optimal pH outcomes are achieved, with ionic liquid consumption values of 0.4–0.6 g/g of paper. The FTIR analysis revealed structural changes in cellulose induced by the washing step, which is mainly due to the reorganization effect imparted by the ionic liquids. Furthermore, ILs mobilized degraded compounds and acidic species, aiding in their extraction during the restoration process. Mechanical testing indicated an enhancement in the overall tensile strength and strain at break values for IL-treated papers by up to 33%. This study demonstrates the multiple benefits of alkylimidazolium ionic liquids for preserving and restoring cultural heritage artifacts made of cellulosic materials. [ABSTRACT FROM AUTHOR]

The forest products industries play a vital role in the economic, social, and environmental well-being of the Lake States in the United States. While various economic contribution analyses of forest products industries have been conducted to highlight the importance of such industries to regional economies, little effort has yet been made to parse out the contribution of activities in the value chain. The value chain is a series of steps involved in producing goods or services. This study used a matrix decomposition approach to estimate the economic contribution along the value chain through multiple pathways of four forest resource-based industries using wood as inputs: biomass power generation, sawmills, paper mills, and the construction of new single-family residential structures in the Lake States. The direct and indirect economic output values in 2017 resulting from the construction of new single-family residential structures were $19.1 billion, sawmills were $2.5 billion, paper mills were $17.6 billion, and the biomass power generation industry was $759 million. Of the direct and indirect economic output contributed by each industry, the highest percentage of output attributable to the logging industry was observed from the sawmills industry (12%), followed by biomass power generation (9%), paper mills (1.4%), and the construction of new single-family residential structures (<1%), respectively. The percentage of total economic output attributable to the stumpage industry in the region followed a similar trend as commercial logging for all value-chain industries. The relative economic contribution of the value-chain industries to the total economic contribution of the final industry varied based on whether the industry was a primary or secondary forest products industry and the pathways used for sourcing wood inputs. [ABSTRACT FROM AUTHOR]

The terahertz spectrum of paper has been measured from room temperature to cryogenic temperatures. As the paper is cooled, the main absorption lines move to higher frequencies. The same behaviour is observed for two types of paper. The spectrum at base temperature provides the most direct comparison yet with calculations made using density functional theory, which assume the studied material to be at absolute zero temperature. These unique experiments should spur the development of better theoretical models of cellulose and cognate materials. [ABSTRACT FROM AUTHOR]

In recent years, due to environmental awareness regarding the harmfulness of polymeric materials, there has been a growing interest in using papers, especially those from alternative raw materials. The importance of using all available raw materials is imperative today. Raw materials that were once viewed as waste are now of great importance because they have the ability to replace raw materials that are used irrationally or are lacking. Cereal straw is a lignocellulosic material that could be used in the paper industry and in the production of increasingly prevalent paper packaging. The aim of this research was to analyze the relationships between the qualitative parameters of straw-based printed papers containing 30% agricultural residues (wheat, barley, or triticale). The influence of two qualitative parameters (ink penetration depth and optical ink density) on the print-through was observed using multiple regression analysis on straw-based papers produced at the laboratory level. Throughout the research, 100% recycled wood paper was used as a reference sample. The results of the regression analysis showed that none of the variables individually make a statistically significant contribution to the prediction of the dependent variable in a linear context, that is, they indicate a non-linear interaction between the variables and the specific conditions under which the dependent variable reaches local extremes and changes in the gradient. Considering the results of the regression analysis and the visualization of the relationship, the model was additionally tested with other independent variables (paper type). From the results obtained, it can be concluded that the alternative straw-based paper with 30% barley pulp has the best interaction between ink and paper, which is the most similar to the reference sample in terms of printability, while the alternative straw-based paper with 30% wheat generally differs significantly from the reference paper when all three prints are considered. [ABSTRACT FROM AUTHOR]

Copyright of Information Library Magazine 'INFOLIB' is the property of National Library of Uzbekistan named after Alisher Navoi and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Information Library Magazine 'INFOLIB' is the property of National Library of Uzbekistan named after Alisher Navoi and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Textile Leader is the property of China Textile Information Center and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The forest products industries play a vital role in the economic, social, and environmental well-being of the Lake States in the United States. While various economic contribution analyses of forest products industries have been conducted to highlight the importance of such industries to regional economies, little effort has yet been made to parse out the contribution of activities in the value chain. The value chain is a series of steps involved in producing goods or services. This study used a matrix decomposition approach to estimate the economic contribution along the value chain through multiple pathways of four forest resource-based industries using wood as inputs: biomass power generation, sawmills, paper mills, and the construction of new single-family residential structures in the Lake States. The direct and indirect economic output values in 2017 resulting from the construction of new single-family residential structures were $19.1 billion, sawmills were $2.5 billion, paper mills were $17.6 billion, and the biomass power generation industry was $759 million. Of the direct and indirect economic output contributed by each industry, the highest percentage of output attributable to the logging industry was observed from the sawmills industry (12%), followed by biomass power generation (9%), paper mills (1.4%), and the construction of new single-family residential structures (