Search

The study demonstrates high‐quality pulsed‐laser‐deposited (PLD) barium titanate (BTO) thin‐films on a magnesium oxide substrate. The frequency response of the relative permittivity (dielectric constant) and the linear electro‐optical coefficient (Pockels coefficient) are measured. At 0.2 GHz, the Pockels coefficient is fitted to be r42 ≈ 1030 pm V−1. It decreases to ≈390 pm V−1 at 10 GHz after which it remains constant up to 70 GHz. The unbiased BTO permittivity is measured to be εa ≈ 7600 at 0.2 GHz, dropping to ≈1100 at 67 GHz, while the biased BTO had a permittivity εa ≈ 2000 at 0.2 GHz, dropping to ≈500 at 67 GHz. These results fill an important experimental characterization gap for high‐speed BTO applications and show the high quality of PLD‐grown BTO films. Lastly, the material's crystalline quality is characterized and the domain distribution is imaged. The findings enable the design and fabrication of a new generation of BTO‐based components for sensing and communications. [ABSTRACT FROM AUTHOR]

A dual sideband reception scheme for radio-over fiber (RoF) links is introduced. It is shown that the new receiver can increase the performance of noise-limited systems by up to 3 dB (2.97 dB in a lab back-to-back experiment). The receiver scheme exploits the fact that current RoF links do not realize their full potential. This is because in typical RoF receivers, the radio-frequency (RF) signals are mapped back to the optical domain by means of electro-optical modulator. In this process energy typically is lost as only one of the two generated sidebands is subsequently used. The suggested receiver exploits the signal of both sidebands. The receiver scheme was subsequently tested in a full optical-RF-optical transmission link at RF carrier frequencies of 228 GHz over a free-space channel spanning distances of 1400 m for symbol rates of up to 48 Gbaud 4 QAM. Here, we could achieve SNR improvements of up to 2.6 dB.

This paper introduces a simple method for the measurement of the relative permittivity and the Pockels coefficient of electro-optic (EO) materials in a waveguide up to sub-THz frequencies. By miniaturizing the device and making use of plasmonics, the complexities of traditional methods are mitigated. This work elaborates the fabrication tolerance and simplicity of the method, and highlights its applicability to various materials, substrates and configurations. The method is showcased using drop-casted perovskite barium titanate (BaTiO3, BTO) nano-particle thin-films and it has previously been used to measure epitaxial thin film BTO. In this work we show the effective relative permittivity of drop casted BTO to be ε eff ∼ 30 at 200 MHz, dropping to ∼ 18 at 67 GHz and similarly, the effective Pockels coefficient was found to be r eff ∼ 16 at 350 MHz and ∼ 8 at 70 GHz. These values are a factor > 50 below the values found for thin film BTO. Yet, the fact that the method can be applied to such different samples and Pockels strengths gives testimony to its versatility and sensitivity.