Search

Statement of Problem: While repurposing waste materials into zirconia blocks presents a promising avenue, uncertainty remains regarding whether the bonding properties of recycled zirconia align with those of commercially available zirconia., Purpose: The purpose of this in vitro study was to evaluate the bonding affinity and durability of composite resin to recycled zirconia., Material and Methods: A series of processing steps were performed with recycled zirconia residuals (Lava Plus; 3M Oral Care), including pulverization, sieving, heating, compaction, isostatic pressing, and presintering. The presintered blocks of recycled zirconia (Group R) and commercially available zirconia (Group C) were sectioned and sintered to create test specimens (10×10×1.5 mm). After polishing and airborne-particle abrasion, specimens within each group were bonded to composite resin cylinders using a resin cement (Multilink Speed; Ivoclar AG). The specimens were then divided into 3 subgroups for shear bond strength (SBS) testing: no further treatment, 10 000 thermocycles, and 30 000 thermocycles (n=10). X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), surface roughness, and contact angle were used to analyze the surface physicochemical differences between Groups C and R. Data were analyzed with 2-way ANOVA followed by the Tukey post hoc test for SBS values, Pearson chi-squared test for failure modes, and independent t test for grain size, surface roughness, and wettability (α=.05)., Results: No significant difference was found in the SBS values between Group R and Group C (P=.403), while thermocycling significantly affected the SBS values (P<.05). Group R showed significantly greater R a , R z , and R q values (P<.05) than did Group C. SEM analysis revealed that Group R exhibited more prominent grooves than Group C, while the XRD and EDS patterns exhibited similarities in both the crystalline phase and elemental composition. No significant difference was observed in the water contact angle between the 2 groups (P=.196)., Conclusions: The bonding protocol established for commercially available zirconia was comparable with that of recycled zirconia, but both decreased after thermocycling. The recycling process did not affect the crystalline phase or elemental composition of the zirconia, but it induced alterations in the surface roughness., (Copyright © 2024 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Background: This study aimed to explore the effects of the titanium dioxide (TiO 2 ) concentration and particle size in hydrogen peroxide (HP) on tooth bleaching effectiveness and enamel surface properties., Methods: TiO 2 at different concentrations and particle sizes was incorporated into 40% HP gel to form an HP/TiO 2 gel. The specimens were randomly divided into 8 groups: C1P20: HP + 1% TiO 2 (20 nm); C3P20: HP + 3% TiO 2 (20 nm); C5P20: HP + 5% TiO 2 (20 nm); C1P100: HP + 1% TiO 2 (100 nm); C3P100: HP + 3% TiO 2 (100 nm); C5P100: HP + 5% TiO 2 (100 nm); C0: HP with LED; and C0-woL: HP without LED. Bleaching was conducted over 2 sessions, each lasting 40 min with a 7-day interval. The color differences (ΔE 00 ), whiteness index for dentistry (WI D ), surface microhardness, roughness, microstructure, and composition were assessed., Results: The concentration and particle size of TiO 2 significantly affected ΔE 00 and ΔWI D values, with the C1P100 group showing the greatest ΔE 00 values and C1P100, C3P100, and C5P100 groups showing the greatest ΔWI D values (p < 0.05). No significant changes were observed in surface microhardness, roughness, microstructure or composition (p > 0.05)., Conclusions: Incorporating 1% TiO 2 with a particle size of 100 nm into HP constitutes an effective bleaching strategy to achieve desirable outcomes., (© 2024. The Author(s).)

Nitrate reduction in bio-electrochemical systems (BESs) has attracted wide attention due to its low sludge yields and cost-efficiency advantages. However, the high resistance of traditional electrodes is considered to limit the denitrification performance of BESs. Herein, a new graphene/polypyrrole (rGO/PPy) modified electrode is fabricated via one-step electrodeposition and used as cathode in BES for improving nitrate removal from wastewater. The formation and morphological results support the successful formation of rGO/PPy nanohybrids and confirm the part covalent bonding of Py into GO honeycomb lattices to form a three-dimensional cross-linked spatial structure. The electrochemical tests indicate that the rGO/PPy electrode outperforms the unmodified electrode due to the 3.9-fold increase in electrochemical active surface area and 6.9-fold decrease in the charge transfer resistance (R ct ). Batch denitrification activity tests demonstrate that the BES equipped with modified rGO/PPy biocathode could not only achieve the full denitrification efficiency of 100% with energy recovery (15.9 × 10 -2  ± 0.14 A/m 2 ), but also favor microbial attach and growth with improved biocompatible surface. This work provides a feasible electrochemical route to fabricate and design a high-performance bioelectrode to enhance denitrification in BESs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Statement of Problem: While waste zirconia can be recycled, whether the optical properties of recycled zirconia match those of commercially available zirconia is unclear., Purpose: The purpose of this in vitro study was to evaluate the optical properties of recycled zirconia by assessing its color, translucency, and opalescence across different thicknesses and shades., Material and Methods: Sixty specimens were prepared from 3 mol% yttria-stabilized tetragonal zirconia polycrystal blocks (Lava Plus; 3M ESPE) (group C); 60 other specimens were prepared from waste blocks of the same zirconia (group R). The specimens were further categorized into 4 subgroups (n=15) based on their thicknesses (1.0 mm or 1.5 mm) and shades (A1 or A3). Specimen color was measured with a spectrophotometer (Easyshade Advance 4.0; Vita ZahnFabrik). The parameters of color difference (ΔE 00 ), translucency (TP), contrast ratio (CR), and opalescence (OP) were calculated. Grain size analysis was performed using scanning electron microscopy. Data were analyzed with analysis of variance (ANOVA) (α=.05)., Results: Significant differences in translucency and opalescence were observed between groups C and R in all specimens (P<.001). Group R exhibited a range of TP (4.89 to 11.27), CR (0.74 to 0.91), and OP (3.36 to 8.65) values. The ΔE 00 values between groups C and R ranged from 13.99 to 21.31. Both thickness and shade significantly affected the ΔE 00 values (P<.001). The grain size in group C was not significantly different from that in group R (F=0.364, df=1, P=.555). The TP and OP values of group R decreased with increasing thickness (P<.001)., Conclusions: Recycled zirconia was less translucent and opalescent than commercially available zirconia. The color difference between commercially available and recycled zirconia exceeded the acceptable threshold, even when using the same staining procedure. Recycled zirconia exhibited reduced translucency and opalescence with increasing thickness., (Copyright © 2024 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

The T-cell receptor (TCR) is a crucial molecule in cellular immunity. The single-chain T-cell receptor (scTCR) is a potential format in TCR therapeutics because it eliminates the possibility of αβ-TCR mispairing. However, its poor stability and solubility impede the in vitro study and manufacturing of therapeutic applications. In this study, some conserved structural motifs are identified in variable domains regardless of germlines and species. Theoretical analysis helps to identify those unfavored factors and leads to a general strategy for stabilizing scTCRs by substituting residues at exact IMGT positions with beneficial propensities on the consensus sequence of germlines. Several representative scTCRs are displayed to achieve stability optimization and retain comparable binding affinities with the corresponding αβ-TCRs in the range of μM to pM. These results demonstrate that our strategies for scTCR engineering are capable of providing the affinity-enhanced and specificity-retained format, which are of great value in facilitating the development of TCR-related therapeutics.

Carexduanensis Z.C.Lu, Y.F.Lu & X.F.Jin, a new species in limestone areas of Guangxi, China, was discovered and described. The morphology showed that C.duanensis is similar to C.calcicola , but differs in having culms central, leaf blades 3-5.5 mm wide, bracts longer than spikes, utricles 4-5 mm long, shorter, and nutlets abruptly contracted into an erect beak at apex. SEM microphotographs of utricles and nutlets are provided for the new and related species, C.calcicola ., Competing Interests: The authors have declared that no competing interests exist., (Zhao-Cen Lu, Yi-Fei Lu, Shi-Li Chang, Ming-Lin Mo, Xiao-Feng Jin.)

This in vitro study aimed to determine the optimal frequency and energy settings for debonding zirconia restorations using an erbium-doped yttrium aluminum garnet (Er:YAG) laser. A total of 200 zirconia specimens (5 mm × 5 mm × 1.5 mm) were fabricated from two types of materials: (1) 3 mol% yttria oxide stabilized tetragonal zirconia polycrystalline (3Y-TZP) and (2) 5 mol% yttria oxide stabilized tetragonal zirconia polycrystalline (5Y-TZP). The zirconia specimens were bonded to dentin using resin cement (RelyX Ultimate, 3 M) and divided into 20 groups based on their laser treatments (n = 5). Er:YAG laser treatment was applied at various frequencies (10 Hz and 20 Hz) and energies (80 mJ, 100 mJ, 120 mJ, 140 mJ, 160 mJ, 180 mJ, 200 mJ, 220 mJ, 240 mJ, and 260 mJ). The time required to debond the specimens and the temperature changes that dentin underwent during the laser treatment were recorded. The surface morphologies of the debonded dentin and zirconia specimens were observed using scanning electron microscopy (SEM). Additional zirconia specimens were fabricated for 4-point flexural strength testing and surface roughness measurements. Statistical analyses were conducted using three-way analysis of variance (ANOVA) and Student-Newman-Keuls (SNK)-q tests (α = 0.05). The debonding time of each specimen varied between 4.8 and 160.4 s, with an average value of 59.2 s. The dentin temperature change for each specimen ranged from 2.3 to 3.6 °C, with an average value of 2.7 °C. The debonding time was significantly influenced by the zirconia material type and laser energy, but it was not affected by the laser frequency. Among the specimens, those made of 3Y-TZP needed significantly more time for debonding than 5Y-TZP. The optimal energies were 220 mJ for 3Y-TZP and 200 mJ for 5Y-TZP. The laser frequency, laser energy, and type of zirconia material had no effect on the dentin temperature change. Additionally, no surface alternations were observed on the dentin or zirconia materials after laser treatment. The surface roughness and flexural strength of the zirconia materials remained unchanged after laser treatment. In summary, Er:YAG laser treatment effectively and safely removes zirconia restorations without impacting their mechanical properties, with a safe temperature change of less than 5.6 °C. The optimum frequency and energy settings for debonding 3Y-TZP and 5Y-TZP restorations were found to be 10/20 Hz and 220 mJ and 10/20 Hz and 200 mJ, respectively., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Single cell modification or hybridization technology has become a popular direction in bioengineering in recent years, with applications in clean energy, environmental stewardship, and sustainable human development. Here, we draw attention to nanoarmor, a representative achievement of cytoprotection and functionalization technology. The fundamental principles of nanoarmor need to be studied with input from multiple disciplines, including biology, chemistry, and material science. In this review, we explain the role of nanoarmor and review progress in its applications. We also discuss three main challenges associated with its development: self-driving ability, heterojunction characteristics, and mineralization formation. Finally, we propose a preliminary classification system for nanoarmor., Competing Interests: Declaration of interests No interests are declared., (Copyright © 2023 Elsevier Ltd. All rights reserved.)