Search

Titanium hydride (TiH2), a promising high-energy additive, is doped into PTFE/Al to optimize the energy output structure of the reactive jet and strive for better aftereffect damage ability to the target. Six types of PTFE/Al/TiH2 reactive liners with different TiH2 content are prepared by the molding and sintering method. The energy release characteristics of PTFE/Al/TiH2 reactive jet are tested by the transient explosion energy test, and are characterized from pressure and temperature. The reaction delay time, pressure history, and temperature history of the energy release process are obtained, then the actual value of released energy and reaction efficiency of the reactive jet are calculated. The results show that the peak pressure and temperature of the PTFE/Al/TiH2 jet initially increase and then decrease with increasing TiH2 content. When the TiH2 content is 10%, the actual value of released energy and reaction efficiency increased by 24% and 6.4%, respectively, compared to the PTFE/Al jet. The reaction duration of the reactive material is significantly prolonged as the TiH2 content increased from 0% to 30%. Finally, combined with the energy release behaviors of PAT material and the dynamic deformation process of liner, the enhancement mechanism of TiH2 on energy release of the reactive jet is expounded.

Abstract Background Preserved Ratio Impaired Spirometry (PRISm) is considered to be a precursor of chronic obstructive pulmonary disease. Radiomics nomogram can effectively identify the PRISm subjects from non-COPD subjects, especially when during large-scale CT lung cancer screening. Methods Totally 1481 participants (864, 370 and 247 in training, internal validation, and external validation cohorts, respectively) were included. Whole lung on thin-section computed tomography (CT) was segmented with a fully automated segmentation algorithm. PyRadiomics was adopted for extracting radiomics features. Clinical features were also obtained. Moreover, Spearman correlation analysis, minimum redundancy maximum relevance (mRMR) feature ranking and least absolute shrinkage and selection operator (LASSO) classifier were adopted to analyze whether radiomics features could be used to build radiomics signatures. A nomogram that incorporated clinical features and radiomics signature was constructed through multivariable logistic regression. Last, calibration, discrimination and clinical usefulness were analyzed using validation cohorts. Results The radiomics signature, which included 14 stable features, was related to PRISm of training and validation cohorts (p

Abstract In the area of “returning farmland to forest” on the Loess Plateau in China, it is difficult to cultivate artificially planted trees into forests. In the current study, abandoned cultivated land after 10 years of natural restoration served as controls (CK), while the treatments included afforestation periods of 2, 4, 6, 8, and 10 years. Soil samples were collected from various depths: 0–20, 20–40, 40–60, 60–80, to 80–100 cm. The findings revealed that with increasing years of artificial afforestation, soil pH gradually increased, and soil moisture content rose in the 0–20 cm layer while declining in deeper layers (20–100 cm) in the Maxian Mountain region of the Loess Plateau. Moreover, the total carbon, nitrogen, phosphorus, and potassium content initially increased and then decreased with the duration of artificial afforestation, reaching peak values after 8 years. Contents of organic matter, ammonium nitrogen, nitrate nitrogen, available phosphorus, and available potassium in the same soil layer increased with each year of afforestation. However, upon reaching 10 years of artificial afforestation, the effective nutrient content in the 60–80 and 80–100 cm soil layers exhibited a decrease. The values of Integrated Fertility Index (IFI) in different afforestation years were ranked as follows: 8 years > 6 years > 10 years > 4 years > 2 year, but all of them were significantly smaller than those of natural restoration plot CK (P

A ternary system of PTFE/Al/Bi2O3 is constructed by incorporating PTFE-based reactive material and thermite for enhancing the energy release of the PTFE-based reactive material. The effects of Bi2O3 in the PTFE/Al/Bi2O3 on both mechanical properties and the energy release were investigated through various tests such as thermogravimetry-differential scanning calorimetry, adiabatic oxygen bomb test and split Hopkinson pressure bar test. The microstructure observed through scanning electron microscope and X-ray diffraction results are used to analyze the ignition and reaction mechanism of PTFE/Al/Bi2O3. The results indicate that the PTFE/Al/Bi2O3 are capable of triggering the exothermic reaction of molten PTFE/Bi2O3 and Al/Bi2O3 over the PTFE/Al reactive materials, thereby promoting reactions. The excessive aluminum in the ternary system is beneficial for increasing energy release. The ignition of shock-induced chemical reactions in PTFE/Al/Bi2O3 is closely related to the material fracture. The dominant mechanism for hot-spot generation under Split Hopkinson Pressure Bar test is the frictional temperature rise at the microcrack after failure.

Abstract Background The occurrence of surgical site infection (SSI) after pancreaticoduodenectomy (PD) is still relatively high. The aim of this retrospective study is to evaluate the efficacy of piperacillin-tazobactam as perioperative prophylactic antibiotic on organ/space SSI for patients underwent PD. Methods Four hundred seven consecutive patients who underwent PD between January 2018 and December 2022 were enrolled and analyzed retrospectively. The univariate and multivariate analysis were used to identify independent risk factors of organ/space SSI. Postoperative complications were compared between the two groups according to the use of prophylactic antibiotics by a ratio of 1:1 propensity score-matched (PSM) analysis. Results Based on perioperative prophylactic antibiotic use, all 407 patients were divided into the ceftriaxone group (n = 192, 47.2%) and piperacillin–tazobactam group (n = 215, 52.8%). The rate of organ/space SSI was 31.2% with the choice of perioperative antibiotics (OR = 2.837, 95%CI = 1.802–4.465, P

Abstract As urban density increases, it becomes increasingly common for multiple functions to coexist within the same space, intensifying the complexity of human activity dynamics. However, traditional urban zoning, which relies on the spatial distribution of urban functions and human activities, focuses on the spatial heterogeneity of urban space and fails to capture the temporal dynamics of urban space usage. This paper aims to investigate the daily rhythm of urban space usage and illustrate how the distribution and combination of urban functions affect the daily usage rhythm. Taking Beijing in China as a case, we first identified the daily rhythm of urban space usage with the k-means algorithm and zoned urban space accordingly. Subsequently, multinomial logistic (MNL) models were employed to elucidate how the distribution and combination of urban functions influenced these daily usage patterns. Furthermore, a validation study in typical zones was conducted. The results revealed the existence of a distinct daily rhythm in urban space usage, resulting in the classification of urban space into seven distinct zones: high equilibrium, low equilibrium, diurnal, nocturnal, morning, evening, and noon-type zones. Also, we found that this daily usage rhythm is closely intertwined with the distribution and coexistence of urban functions. Our findings could provide valuable insights for the enhancement of various intricate aspects within urban decision-making processes, including urban planning, transportation management, and more, at a fine-grained scale.

Abstract Bacterial infection is a major threat to public health. Nanotechnology offers a solution by combining nanomaterials with antibacterial agents. The development of an effective nanocomposite against drug‐resistant bacteria such as methicillin‐resistant Staphylococcus aureus (MRSA) is highly important yet challenging. Here, an anti‐MRSA core–shell structure is designed, containing antibacterial zeolitic imidazolate framework‐8 (ZIF‐8) as the core and bactericidal benzalkonium chloride (BAC) templated rough‐surface mesostructured silica nanocomposite (RMSN) as the shell. The resultant ZIF‐8@RMSN nanocomposite exhibits sustained release of BAC and zinc ions, effective disruption of the bacterial membrane, generation of oxidative damage of bacterial DNA, leakage of intracellular components, and finally bacterial death. Furthermore, the synergistic antibacterial mechanisms lead to enhanced biofilm elimination performance. In addition, the ZIF‐8@RMSN‐modified band‐aid effectively combats MRSA infection in vivo. This work has provided a promising nanocomposite against MRSA‐related infections.

Titanium hydride (TiH2), a promising high-energy additive, is doped into PTFE/Al to optimize the energy output structure of the reactive jet and strive for better aftereffect damage ability to the target. Six types of PTFE/Al/TiH2 reactive liners with different TiH2 content are prepared by the molding and sintering method. The energy release characteristics of PTFE/Al/TiH2 reactive jet are tested by the transient explosion energy test, and are characterized from pressure and temperature. The reaction delay time, pressure history, and temperature history of the energy release process are obtained, then the actual value of released energy and reaction efficiency of the reactive jet are calculated. The results show that the peak pressure and temperature of the PTFE/Al/TiH2 jet initially increase and then decrease with increasing TiH2 content. When the TiH2 content is 10%, the actual value of released energy and reaction efficiency increased by 24% and 6.4%, respectively, compared to the PTFE/Al jet. The reaction duration of the reactive material is significantly prolonged as the TiH2 content increased from 0% to 30%. Finally, combined with the energy release behaviors of PAT material and the dynamic deformation process of liner, the enhancement mechanism of TiH2 on energy release of the reactive jet is expounded. [ABSTRACT FROM AUTHOR]

NiOx as a hole transport material for inverted perovskite solar cells has received great attention owing to its high transparency, low fabrication temperature, and superior stability. However, the mismatched energy levels and possible redox reactions at the NiOx/perovskite interface severely limit the performance of NiOx-based inverted perovskite solar cells. Herein, we introduce a p-type self-assembled monolayer between NiOx and perovskite layers to modify the interface and block the undesirable redox reaction between perovskite and NiOx. The self-assembled monolayer molecules all contain phosphoric acid function groups, which can be anchored onto the NiOx surface and passivate the surface defect. Moreover, the introduction of self-assembled monolayers can regulate the energy level structure of NiOx, reduce the interfacial band energy offset, and hence promote the hole transport from perovskite to NiOx layer. Consequently, the device performance is significantly enhanced in terms of both power conversion efficiency and stability. [ABSTRACT FROM AUTHOR]

PURPOSE Non-invasive methods for predicting pathological complete response (pCR) after neoadjuvant chemoradiotherapy (nCRT) can provide distinct leverage in the management of patients with locally advanced rectal cancer (LARC). This study aimed to investigate whether including the golden- angle radial sparse parallel (GRASP) dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) perfusion parameter (Ktrans), in addition to tumor regression grading (TRG) and apparent diffusion coefficient (ADC) values, can improve the predictive ability for pCR. METHODS Patients with LARC who underwent nCRT and subsequent surgery were included. The imaging parameters were compared between patients with and without pCR. Receiver operating characteristic (ROC) curve analysis was used to evaluate the predictive ability of these parameters for pCR. RESULTS A total of 111 patients were included in the study. A pCR was obtained in 32 patients (28.8%). MRIbased TRG (mrTRG) showed a negative correlation with pCR (r = -0.61, P < 0.001), and the average ADC value showed a positive correlation with pCR (r = 0.62, P < 0.001). Before nCRT, Ktrans in the pCR group was significantly higher than in the non-pCR group (1.30 ± 0.24 vs. 0.88 ± 0.34, P < 0.001), but no difference was identified after nCRT. Following ROC curve analysis, the area under the curve (AUC) of mrTRG (level 1-2), average ADC value, and Ktrans value for predicting pCR were 0.738 [95% confidence interval (CI): 0.65-0.82], 0.78 (95% CI: 0.69-0.86), and 0.84 (95% CI: 0.77-0.92), respectively. The model combining the three parameters had significantly higher predictive ability for pCR (AUC: 0.94, 95% CI: 0.88-0.98). CONCLUSION The use of a combination of the GRASP DCE-MRI Ktrans with mrTRG and ADC can lead to a better pCR predictive performance. [ABSTRACT FROM AUTHOR]

A ternary system of PTFE/Al/Bi2O3 is constructed by incorporating PTFE-based reactive material and thermite for enhancing the energy release of the PTFE-based reactive material. The effects of Bi2O3 in the PTFE/Al/Bi2O3 on both mechanical properties and the energy release were investigated through various tests such as thermogravimetry-differential scanning calorimetry, adiabatic oxygen bomb test and split Hopkinson pressure bar test. The microstructure observed through scanning electron microscope and X-ray diffraction results are used to analyze the ignition and reaction mechanism of PTFE/Al/Bi2O3. The results indicate that the PTFE/Al/Bi2O3 are capable of triggering the exothermic reaction of molten PTFE/Bi2O3 and Al/Bi2O3 over the PTFE/Al reactive materials, thereby promoting reactions. The excessive aluminum in the ternary system is beneficial for increasing energy release. The ignition of shock-induced chemical reactions in PTFE/Al/Bi2O3 is closely related to the material fracture. The dominant mechanism for hot-spot generation under Split Hopkinson Pressure Bar test is the frictional temperature rise at the microcrack after failure. [ABSTRACT FROM AUTHOR]

Obesity, a multifactorial disease with many complications, has become a global epidemic. Weight management, including dietary supplementation, has been confirmed to provide relevant health benefits. However, experimental evidence and mechanistic elucidation of dietary supplements in this regard are limited. Here, the weight loss efficacy of MHP, a commercial solid beverage consisting of mulberry leaf aqueous extract and Hippophae protein peptides, was evaluated in a high-fat high-fructose (HFF) diet-induced rat model of obesity. Body component analysis and histopathologic examination confirmed that MHP was effective to facilitate weight loss and adiposity decrease. Pathway enrichment analysis with differential metabolites generated by serum metabolomic profiling suggests that PPAR signal pathway was significantly altered when the rats were challenged by HFF diet but it was rectified after MHP intervention. RNA-Seq based transcriptome data also indicates that MHP intervention rectified the alterations of white adipose tissue mRNA expressions in HFF-induced obese rats. Integrated omics reveals that the efficacy of MHP against obesogenic adipogenesis was potentially associated with its regulation of PPARγ and FGFR1 signaling pathway. Collectively, our findings suggest that MHP could improve obesity, providing an insight into the use of MHP in body weight management. [ABSTRACT FROM AUTHOR]

Abstract Dyslipidemia and hepatic steatosis are the characteristics of the initial stage of nonalcohol fatty liver disease (NAFLD), which can be reversed by lifestyle intervention, including dietary supplementation. However, such commercial dietary supplements with solid scientific evidence and in particular clear mechanistic elucidation are scarce. Here, the health benefits of MHP, a commercial mulberry and Hippophae‐based solid beverage, were evaluated in NAFLD rat model and the underlying molecular mechanisms were investigated. Histopathologic examination of liver and white adipose tissue found that MHP supplementation reduced hepatic lipid accumulation and adipocyte hypertrophy. Serum biochemical results confirmed that MHP effectively ameliorated dyslipidemia and decreased circulation‐free fatty acid level. RNA‐Seq‐based transcriptomic analysis showed that MHP‐regulated genes are involved in the inhibition of lipolysis of adipose tissue and thus may contribute to the reduction of hepatic ectopic lipid deposition. Furthermore, MHP upregulated ACSL1–CPT1a–CPT2 pathway, a canonical pathway that regulated mitochondrial fatty acid metabolism, and promoted liver and adipose tissue fatty acid β‐oxidation. These results suggest that adipose tissue–liver crosstalk may play a key role in maintaining glucose and lipid metabolic hemostasis. In addition, MHP can also ameliorate chronic inflammation through regulating the secretion of adipokines. Our study demonstrates that MHP is able to improve dyslipidemia and hepatic steatosis through crosstalk between adipose tissue and liver and also presents transcriptomic evidence to support the underlying mechanisms of action, providing solid evidence for its health claims.

The selective oxidation of amines to imines under mild conditions has attracted much attention. Our study reveals that copper phenylacetylide (PhC 2 Cu) could serve as an efficient photocatalyst for imine synthesis under visible-light irradiation (>400 nm). Utilizing benzylamine as a model reactant, PhC 2 Cu achieves an imine yield of 50.4%, which is 5 times higher than that of P25 under the same conditions and comparable to the yield obtained by the 3 wt % Au/P25 photocatalyst (55.4%). Further loading 3.9 nm TiO 2 onto PhC 2 Cu through tetrabutyl titanate hydrolysis increases the imine yield to 84.7%, with a Ti:Cu atomic ratio of 3.65%. Control experiments, photoluminescence (PL) spectra, optical pump terahertz probe (OPTP) spectra, and electron spin resonance (ESR) tests confirm that the optimized TiO 2 modification promotes the separation of excited carriers and electron transfer in PhC 2 Cu and facilitates the activation of surface oxygen, thereby enhancing the formation of superoxide radicals, a key active oxygen species in the reaction system. This work presents a promising strategy for efficient imine synthesis via amine coupling and expands the application field of PhC 2 Cu-based photocatalysts.

The two-step sequential deposition strategy has garnered widespread usage in the fabrication of high-performance perovskite solar cells based on FAPbI 3 . However, the rapid reaction between FAI and PbI 2 during preparation often leads to incomplete reactions, reducing the device efficiency and stability. Herein, we introduced a multifunctional additive, 2-thiophenyl trifluoroacetone (TTA), into the FAI precursor. The incorporation of TTA has proven to be highly effective in slowing the reaction rate between FAI and PbI 2 , resulting in increased perovskite formation and improved efficiency and stability of the devices. TTA's CF 3 groups interact with FAI via hydrogen bonding, effectively suppressing FA + defects. The S and C═O groups share lone pair electrons with uncoordinated Pb 2+ , leading to a reduction in perovskite film defects and suppressing nonradiative recombination. Additionally, the CF 3 groups impart hydrophobicity, protecting the perovskite film from moisture-induced erosion. As a result, the TTA-modified perovskite film achieves a Champion efficiency of 23.42% compared to the control's 21.52, with 20.58% efficiency for a 25 cm 2 solar module. Remarkably, the unencapsulated Champion device retains 86% of its initial PCE after 1080 h under dark conditions (60 ± 5 °C, 35 ± 5% RH), indicating enhanced long-term stability. These findings offer a promising and cost-effective tactic for high-quality perovskite film fabrication.