Search

To achieve the efficient resource utilization of municipal sludge and promote the sustainability of pavement materials, this study employed liquefaction technology to process municipal sludge. The resulting liquefied-sludge-derived heavy oil was blended with 50# asphalt to prepare a bio-asphalt that can replace petroleum asphalt. Firstly, orthogonal experiments were conducted to analyze the effects of the solid–liquid ratio (dried sludge:anhydrous ethanol), liquefaction temperature, and reaction time on the yield of the sludge-derived heavy oil. Then, the basic characteristics of the sludge-derived heavy oil were studied using an elemental analyzer, gel permeation chromatography, thermal analysis, gas chromatography–mass spectrometry, and Fourier transform infrared spectroscopy, and the differences between the sludge-derived heavy oil and petroleum asphalt were compared. Finally, to determine the appropriate content range of sludge-derived heavy oil in bio-asphalt, a comprehensive evaluation of the three major indicators, aging resistance, storage stability, low-temperature performance, and high-temperature performance was carried out for the prepared bio-asphalts. The results indicated that the optimal preparation process for liquefied sludge oil involves a liquefaction temperature of 275 °C, a solid–liquid ratio of 1:15, and a reaction time of 1 h, resulting in an oil production rate of 22.36%. The sludge-derived heavy oil demonstrated good thermal stability, with its primary components being aliphatic compounds (carboxylic acids, ketones, aldehydes, alcohols, alkanes, esters, etc.), with esters being the most abundant. Furthermore, the sludge-derived heavy oil was highly compatible with 50# asphalt, but no chemical reaction occurred between them. When the sludge-derived heavy oil content ranged from 5% to 20%, bio-asphalt showed favorable aging resistance and storage stability. As the content of the sludge-derived heavy oil increased, its low-temperature performance improved, but there was a slight decrease in high-temperature performance. Additionally, correlation analysis highlighted that the influence of sludge-derived heavy oil content on the high-temperature performance of bio-asphalt was notably greater than on other properties. Therefore, the recommended dosage of sludge-derived heavy oil should be between 5% and 10%. [ABSTRACT FROM AUTHOR]

Background and objective: The prevalence of 12-hour shift work is increasing in various occupations. Shift work has been linked to circadian rhythm disruption, which may lead to hormonal changes and metabolic disorders, including alterations in glucose, lipid, and purine metabolism. Despite this, there is limited research on the potential connection between work shifts and abnormal serum uric acid (SUA) levels. Furthermore, the factors that contribute to abnormal SUA levels in shift workers are not well-understood. Therefore, this study aimed to analyze the SUA levels of shift workers employed in an aircraft maintenance company, investigate the potential association between shift work and SUA levels, and explore the factors that may influence abnormal SUA levels in shift workers. Methods: A total of 2263 male workers from an aircraft maintenance company were included in this study using the cluster sampling method. The workers were divided into two groups based on their working shifts: night shift (N = 1047, 46.27%) and day working (N = 1216, 53.73%). A survey was conducted between April 1st and June 30th, 2022 to gather information on work, lifestyle, physical examination results, and other relevant factors. The survey included a self-designed demographic information questionnaire to collect data on workers' characteristics, medical history, years of employment, smoking and drinking habits, and main lifestyle behaviors. The workers' SUA levels were measured using uricase colorimetry. One-way ANOVA was used to compare the difference in the abnormal detection rate of SUA between the two groups, and multi-factor logistic regression analysis was used to identify the factors that influence abnormal SUA levels. Results: The study indicated that 48.9% of night shift workers and 43.8% in the regular day workers had abnormal SUA levels, with a significant difference between the two groups (χ2 = 6.125, P = 0.013). Factors such as circadian rhythm type, shift work, age, the taste of diet, type of diet, smoking, overweight or obesity based on body mass index (BMI), concentration of urine creatinine (CREA), total cholesterol, triglyceride, and low-density lipoprotein cholesterol were found to be correlated with SUA abnormalities (P < 0.05). The risk of developing SUA abnormalities was found to be higher in individuals with an intermittent (OR = 1.34, 95% CI: 0.83–2.12, P < 0.05) or evening circadian rhythm type (OR = 1.45, 95% CI: 0.86–2.43, P > 0.05) compared to those with a morning type. Additionally, factors such as night shift work, a high-sodium diet, smoking, a diet high in meat and low in vegetables, being overweight or obese, and higher levels of CREA were also found to increase the risk of developing SUA abnormalities. The study also revealed a significant dose-response relationship between BMI and abnormal uric acid levels. After controlling for other factors, the risk of developing SUA abnormalities was found to be 1.18 times higher in the night shift work group than in the day work group (OR = 1.18, 95% CI:1.02–1.34, P = 0.01). Conclusion: Shift work has been linked to a higher risk of developing SUA abnormalities, and there are several factors that may contribute to this risk. To prevent diseases, it is recommended that enterprises implement better health monitoring and management practices for shift workers. [ABSTRACT FROM AUTHOR]

Much effort in the past few years has been made in tunnelling, however, no work has been reported so far on how to maintain the maximum tunnelling of complex optical fields in waveguides, due to the limitations of existing physical mechanisms. Here, a new paradigm is presented for realizing anomalous wave tunnelling through a general effective double‐barrier model constructed by dispersion engineering, while preserving mode information. The observed tunnelling mechanism is corroborated well by experimental results in the microwave realm. Specifically, evanescent waves bridge the gap between external space and potential well, allowing us to modulate the leaky modes within the potential well and thus achieve multiple resonant tunnelling. Due to the constant phase difference between adjacent maximum tunnelling, such mechanism broadens the potential of binary integrated devices. For example, assembling the tunnelling unit into arrays straightforwardly alleviates the trade‐off dilemma between diffraction law and cut‐off frequency. In addition, this approach provides an ideal toolbox for achieving multifunctional tunnelling across waveguide modes of various orders or polarizations, which can boost various applications in optical filters, tunneling lasers, optical switching, and sensing. [ABSTRACT FROM AUTHOR]

A pellet-forming as-catalyst, CuO/Al2O3, was prepared by the precipitation–tablet molding method and characterized by the Brunner–Emmet–Teller (BET), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) techniques and TEM. The characterization results showed that the formed CuO/Al2O3 was in situ reduced to Cu/Al2O3 and Cu2O/ Al2O3 catalysts in the reaction system. The catalytic performance of catalyzing hydrogenation starch into glucose was investigated in an autoclave over CuO/Al2O3. The yield of glucose reached 83.16% at a temperature of 160 °C, a pressure of 1.8 MPa, a 100 g starch solution of 15 wt%, a catalyst dosage of 2.25%, a reaction time of 4 h, and a rotational speed of 630 r/min. The reusability of the catalyst was evaluated, and the glucose yield did not decrease obviously even after being reused for five consecutive cycles. Starch was converted into glucose through the synergistic action of Cu+ and Cu0 catalysis. This work is expected to provide valuable insights into the design of catalysts and the hydrogenation process for efficient starch hydrogenation. [ABSTRACT FROM AUTHOR]

A large-scale series of cyclic triaxial tests were conducted to explore the evolution of the dynamic resilient modulus of silty clay for the heavy-haul railway subgrade. A novel loading sequence for measuring the dynamic resilient modulus was established, which characterized the dynamic stress state of the subgrade induced by the heavy-haul train load. In the experimental investigation, the deviatoric stresses, confining stress, initial moisture content, and compaction degree were considered as variables, and the effects of the aforementioned variables were evaluated quantitatively. The experimental results showed that the dynamic resilient modulus was negatively related to deviatoric stresses and initial moisture content, where the average decreased rates were 14.65% and 27.79% with the increase in deviatoric stresses from 60 kPa to 150 kPa and increase in the initial moisture content from 9.8% to 15.8%, respectively. Furthermore, the dynamic resilient modulus was positively related to confining stress and compaction degree, where the average increased rates were 23.25% and 27.48% with the increase in confining stress from 20 kPa to 60 kPa and increase in compaction degree from 0.91 to 0.95. To provide a better application, the two high-accuracy predicted methods were established through the empirical model and artificial neural network approach including the aforementioned variables. This study can provide useful guidelines for the effective and safe design of the heavy-haul railway subgrade filled with silty clay. [ABSTRACT FROM AUTHOR]

BMP and activin membrane-bound inhibitor (BAMBI) is a transmembrane glycoprotein, known as a pseudo-receptor for TGFβ, as, while its extracellular domain is similar to that of type I TGFβ receptors, its intracellular structure is shorter and lacks a serine/threonine phosphokinase signaling motif. BAMBI can regulate numerous biological phenomena, including glucose and lipid metabolism, inflammatory responses, and cell proliferation and differentiation. Furthermore, abnormal expression of BAMBI at the mRNA and protein levels contributes to various human pathologies, including obesity and cancer. In the present review, the structure of BAMBI is briefly introduced and its associated signaling pathways and physiological functions are described. Understanding of BAMBI structure and function may contribute to knowledge regarding the occurrence of diseases, including obesity and diabetes, among others. The present review provides a theoretical foundation for the development of BAMBI as a potential biomarker or therapeutic target. [ABSTRACT FROM AUTHOR]

Microalgal-bacterial granular sludge (MBGS) could offer a sustainable alternative to traditional aerobic methods in brewery wastewater (BWW) treatment. This study compared MBGS with conventional activated sludge (AS) in treating real BWW and highlighted its advantages and challenges. MBGS achieved comparable chemical oxygen demand removal efficiency (93%) compared to AS (89%). Additionally, MBGS exhibited higher phosphate removal capabilities than AS. Extra nitrogen was added to influent to balance C/N ratio of BWW. MBGS was robust in handling C/N ratio fluctuations with an 82% total nitrogen removal efficiency. Metagenomic analysis further indicated that most of the genes involved in carbon, nitrogen and phosphorus metabolism were up-regulated in MBGS compared to AS. Despite changes in the microbial community and settling ability due to high starch and sugar content in BWW, MBGS demonstrated high efficiency and sustainability. Further research should optimize MBGS operation strategies to fully realize its potential for sustainable BWW treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Acute myeloid leukemia (AML) is a common hematological malignancy with overall poor prognosis. Exploring novel targets is urgent and necessary to improve the clinical outcome of relapsed and refractory (RR) AML patients. Through clinical specimens, animal models and cell-level studies, we explored the specific mechanism of 3-hydroxy-3-methylglutaryl coenzyme A synthase 1 (HMGCS1) in AML and the mechanism of targeting HMGCS1 to attenuate cell proliferation, increase chemotherapy sensitivity and improve the occurrence and development of AML. Here, we reveal that HMGCS1 is overexpressed in RR patients and negatively related to overall survival (OS). Knocking out HMGCS1 in AML cells attenuated cell proliferation and increased chemotherapy sensitivity, while stable overexpression of HMGCS1 had the opposite effects. Mechanistically, we identified that knockout of HMGCS1 suppressed mitogen-activated protein kinase (MAPK) pathway activity, while overexpression of HMGCS1 could remarkably enhance the pathway. U0126, a MEK1 inhibitor, offset the effects of HMGCS1 overexpression, indicating that HMGCS1 promotes RR AML through the MAPK pathway. Further, we verified that hymeglusin, a specific inhibitor of HMGCS1, decreases cell growth both in AML cell lines and primary bone marrow cells of AML patients. Furthermore, combination of hymeglusin and the common chemotherapeutic drug cytarabine and adriamycin (ADR) had synergistic toxic effects on AML cells. Our study demonstrates the important role of HMGCS1 in AML, and targeting this protein is promising for the treatment of RR AML., (Copyright © 2024 The Authors. Published by Wolters Kluwer Health Inc., on behalf of the Chinese Medical Association (CMA) and Institute of Hematology, Chinese Academy of Medical Sciences & Peking Union Medical College (IHCAMS).)