Search

Interactive sensors are an important component of robotic systems but often require manual replacement due to wear and tear. Automating this process can enhance system autonomy and facilitate long-term deployment. We developed an autonomous sensor exchange and calibration system for an agriculture crop monitoring robot that inserts a nitrate sensor into cornstalks. A novel gripper and replacement mechanism, featuring a reliable funneling design, were developed to enable efficient and reliable sensor exchanges. To maintain consistent nitrate sensor measurement, an on-board sensor calibration station was integrated to provide in-field sensor cleaning and calibration. The system was deployed at the Ames Curtis Farm in June 2024, where it successfully inserted nitrate sensors with high accuracy into 30 cornstalks with a 77$\%$ success rate.

A promising approach to detect high-energy tau neutrinos is through the measurement of impulsive radio emission from horizontal air showers initiated in the Earth's atmosphere. Observations at frequencies between 30 and 80 MHz seem particularly promising -- if high-gain antennas focused at the horizon and blocking out as much as possible of the noisy sky are employed. Due to the large wavelengths, however, designing an antenna with the required properties is highly non-trivial at such low frequencies. In this article, we explore suitable antenna designs that provide the desired high gain, possess a smooth beam, are insensitive to ground conditions, are easily impedance-matched over the wide band, and are mechanically simple for deployment in large numbers in inaccessible terrain. In particular, we consider the "rhombus" antenna design for both horizontally and vertically polarized radiation a very attractive option for tau neutrino detection efforts in the atmosphere with the radio technique., Comment: 15 pages, to be submitted to JINST

Model-based planners and controllers are commonly used to solve complex manipulation problems as they can efficiently optimize diverse objectives and generalize to long horizon tasks. However, they are limited by the fidelity of their model which oftentimes leads to failures during deployment. To enable a robot to recover from such failures, we propose to use hierarchical reinforcement learning to learn a separate recovery policy. The recovery policy is triggered when a failure is detected based on sensory observations and seeks to take the robot to a state from which it can complete the task using the nominal model-based controllers. Our approach, called RecoveryChaining, uses a hybrid action space, where the model-based controllers are provided as additional \emph{nominal} options which allows the recovery policy to decide how to recover, when to switch to a nominal controller and which controller to switch to even with \emph{sparse rewards}. We evaluate our approach in three multi-step manipulation tasks with sparse rewards, where it learns significantly more robust recovery policies than those learned by baselines. Finally, we successfully transfer recovery policies learned in simulation to a physical robot to demonstrate the feasibility of sim-to-real transfer with our method., Comment: 8 pages, 9 figures

This is an index of the contributions by the Giant Radio Array for Neutrino Detection (GRAND) Collaboration to the 10th International Workshop on Acoustic and Radio EeV Neutrino Detection Activities (ARENA 2024, University of Chicago, June 11-14, 2024). The contributions include an overview of GRAND in its present and future incarnations, methods of radio-detection that are being developed for them, and ongoing joint work between the GRAND and BEACON experiments., Comment: Note: To access the list of contributions, please follow the "HTML" link that can be found on the arXiv page

Neutrinos at ultrahigh energies can originate both from interactions of cosmic rays at their acceleration sites and through cosmic-ray interactions as they propagate through the universe. These neutrinos are expected to have a low flux which drives the need for instruments with large effective areas. Radio observations of the inclined air showers induced by tau neutrino interactions in rock can achieve this, because radio waves can propagate essentially unattenuated through the hundreds of kilometers of atmosphere. Proposed arrays for radio detection of tau neutrinos focus on either arrays of inexpensive receivers distributed over a large area, the GRAND concept, or compact phased arrays on elevated mountains, the BEACON concept, to build up a large detector area with a low trigger threshold. We present a concept that combines the advantages of these two approaches with a trigger driven by phased arrays at a moderate altitude (1 km) and sparse, high-gain outrigger receivers for reconstruction and background rejection. We show that this design has enhanced sensitivity at 100 PeV over the two prior designs with fewer required antennas and discuss the need for optimized antenna designs., Comment: ARENA2024 Conference Proceeding PoS(ARENA2024)058

Dexterous robotic manipulation remains a challenging domain due to its strict demands for precision and robustness on both hardware and software. While dexterous robotic hands have demonstrated remarkable capabilities in complex tasks, efficiently learning adaptive control policies for hands still presents a significant hurdle given the high dimensionalities of hands and tasks. To bridge this gap, we propose Tilde, an imitation learning-based in-hand manipulation system on a dexterous DeltaHand. It leverages 1) a low-cost, configurable, simple-to-control, soft dexterous robotic hand, DeltaHand, 2) a user-friendly, precise, real-time teleoperation interface, TeleHand, and 3) an efficient and generalizable imitation learning approach with diffusion policies. Our proposed TeleHand has a kinematic twin design to the DeltaHand that enables precise one-to-one joint control of the DeltaHand during teleoperation. This facilitates efficient high-quality data collection of human demonstrations in the real world. To evaluate the effectiveness of our system, we demonstrate the fully autonomous closed-loop deployment of diffusion policies learned from demonstrations across seven dexterous manipulation tasks with an average 90% success rate.

Optimizing robotic action parameters is a significant challenge for manipulation tasks that demand high levels of precision and generalization. Using a model-based approach, the robot must quickly reason about the outcomes of different actions using a predictive model to find a set of parameters that will have the desired effect. The model may need to capture the behaviors of rigid and deformable objects, as well as objects of various shapes and sizes. Predictive models often need to trade-off speed for prediction accuracy and generalization. This paper proposes a framework that leverages the strengths of multiple predictive models, including analytical, learned, and simulation-based models, to enhance the efficiency and accuracy of action parameter optimization. Our approach uses Model Deviation Estimators (MDEs) to determine the most suitable predictive model for any given state-action parameters, allowing the robot to select models to make fast and precise predictions. We extend the MDE framework by not only learning sim-to-real MDEs, but also sim-to-sim MDEs. Our experiments show that these sim-to-sim MDEs provide significantly faster parameter optimization as well as a basis for efficiently learning sim-to-real MDEs through finetuning. The ease of collecting sim-to-sim training data also allows the robot to learn MDEs based directly on visual inputs and local material properties.

This paper presents a modular, reconfigurable robot platform for robot manipulation in agriculture. While robot manipulation promises great advancements in automating challenging, complex tasks that are currently best left to humans, it is also an expensive capital investment for researchers and users because it demands significantly varying robot configurations depending on the task. Modular robots provide a way to obtain multiple configurations and reduce costs by enabling incremental acquisition of only the necessary modules. The robot we present, Hefty, is designed to be modular and reconfigurable. It is designed for both researchers and end-users as a means to improve technology transfer from research to real-world application. This paper provides a detailed design and integration process, outlining the critical design decisions that enable modularity in the mobility of the robot as well as its sensor payload, power systems, computing, and fixture mounting. We demonstrate the utility of the robot by presenting five configurations used in multiple real-world agricultural robotics applications., Comment: 8 pages, 11 figures

Measure structured deformations are introduced to present a unified theory of deformations of continua. The energy associated with a measure structured deformation is defined via relaxation departing either from energies associated with classical deformations or from energies associated with structured deformations. A concise integral representation of the energy functional is provided both in the unconstrained case and under Dirichlet conditions on a part of the boundary.

Leveraging sensing modalities across diverse spatial and temporal resolutions can improve performance of robotic manipulation tasks. Multi-spatial resolution sensing provides hierarchical information captured at different spatial scales and enables both coarse and precise motions. Simultaneously multi-temporal resolution sensing enables the agent to exhibit high reactivity and real-time control. In this work, we propose a framework, MResT (Multi-Resolution Transformer), for learning generalizable language-conditioned multi-task policies that utilize sensing at different spatial and temporal resolutions using networks of varying capacities to effectively perform real time control of precise and reactive tasks. We leverage off-the-shelf pretrained vision-language models to operate on low-frequency global features along with small non-pretrained models to adapt to high frequency local feedback. Through extensive experiments in 3 domains (coarse, precise and dynamic manipulation tasks), we show that our approach significantly improves (2X on average) over recent multi-task baselines. Further, our approach generalizes well to visual and geometric variations in target objects and to varying interaction forces., Comment: CoRL'23, Project website: http://tinyurl.com/multi-res-realtime-control

When planning with an inaccurate dynamics model, a practical strategy is to restrict planning to regions of state-action space where the model is accurate: also known as a \textit{model precondition}. Empirical real-world trajectory data is valuable for defining data-driven model preconditions regardless of the model form (analytical, simulator, learned, etc...). However, real-world data is often expensive and dangerous to collect. In order to achieve data efficiency, this paper presents an algorithm for actively selecting trajectories to learn a model precondition for an inaccurate pre-specified dynamics model. Our proposed techniques address challenges arising from the sequential nature of trajectories, and potential benefit of prioritizing task-relevant data. The experimental analysis shows how algorithmic properties affect performance in three planning scenarios: icy gridworld, simulated plant watering, and real-world plant watering. Results demonstrate an improvement of approximately 80% after only four real-world trajectories when using our proposed techniques., Comment: Accepted to International Conference on Robotics and Automation 2024. Will be presented May 2024