Search

This paper discusses the mutual interactions between a thin flexible aluminum plate and supersonic flow using two-dimensional (2D) numerical simulations. Calculations are performed using an open source library, SU2, that solves partial differential equations governing fluid and structural dynamics. The configuration considered in this research effort is based on an experiment in which a thin flexible panel of 1.02 mm with a 50.8 mm overhang at the outer edge of a backward facing step is exposed to Mach 2 flow. The computational framework was first validated against measurements for both the initial transients of 10 ms and the fully started conditions at 0.4 s. Then, numerical studies were performed to analyze the fluid-structure interactions at 4 different Mach numbers between 0.5 and 3. The flow behavior revealed distinct phenomena, including shear layer separation for subsonic and transonic flows, and a fully enclosed recirculation region under the overhang in supersonic cases. The time-averaged flow field identified potential temperature hotspots during the initial transients, which intensified as time evolved. For Mach 0.50, the amplitude of the thin panel oscillations increased as the flow transitioned from transient to steady-state conditions. In the transonic case (M = 0.95), the oscillation amplitude became significantly larger, potentially leading to resonant behavior and structural failure (we did not model failure). However, in the supersonic cases, the oscillations stabilized and were sustained after the initial transients. The research quantitatively identifies the influence of the Mach number on the fluid-structure interaction phenomena, which affect pressure loads and the development of thermal hotspots, which are crucial elements in engineering design., Comment: 20 pages, 20 figures, 57 references

This study explores in depth rotating detonation engines (RDEs) fueled by premixed stoichiometric hydrogen/air mixtures through two-dimensional numerical simulations including a detailed chemical kinetic mechanism. To model the spatial reactant non-uniformities observed in practical RDE combustors, the referred simulations incorporate different numbers of discrete inlet nozzles. The primary focus here is to analyze the influence of reactant non-uniformities on detonation combustion dynamics in RDEs. By systematically varying the number of reactant injection nozzles (from 15 to 240), while maintaining a constant total injection area, the study delves into how this variation influences the behavior of rotating detonation waves (RDWs) and the associated overall flow field structure. The numerical results obtained here reveal significant effects of the number of inlets employed on both RDE stability (self-sustaining detonation wave) and performance. RDE configurations with a lower number of inlets exhibit a detonation front with chaotic behavior (pressure oscillations) due to an increased amount of unburned gas ahead of the detonation wave. This chaotic behavior can lead to the flame extinguishing or decreasing in intensity, ultimately diminishing the engine's overall performance. Conversely, RDE configurations with a higher number of inlets feature smoother detonation propagations without chaotic transients, leading to more stable and reliable performance metrics. This study uses high-fidelity numerical techniques such as adaptive mesh refinement (AMR) and the PeleC compressible reacting flow solver. This comprehensive approach enables a thorough evaluation of critical RDE characteristics including detonation velocity, fuel mass flow rate, impulse, thrust, and reverse pressure waves under varying reactant injection conditions.