Search

The continuous operation of essential refining equipment, internal mixers, leads to wear on their end faces, resulting in an increased gap between the mixer chamber and the end face. This, in turn, causes material leakage, reducing mixing efficiency and adversely impacting rubber performance. Therefore, investigating metal wear on the mixer's end face during the mixing process is essential. Scholars have introduced dynamic covalent bonds into rubber molecular chains, bestowing self-repairing capabilities upon the materials. This innovation has significant implications for extending rubber lifespan and lowering production costs. It involves adding methacrylic acid (MAA) and excess zinc oxide (ZnO) to construct an ionic crosslinking network, limiting covalent crosslinking of rubber molecules and enabling in-situ polymerization of MAA/ZnO, resulting in self-repairing properties. However, it is crucial to consider corrosive wear induced by MAA's strong acidity on metals. This study combines MAA, ZnO, and multi-walled carbon nanotubes (MWCNTs) through mechanical mixing to create a composite material called zinc methacrylate (ZDMA)/MWCNTs/rubber. The research investigates the in-situ synthesis mechanism of MAA and ZnO and the synergistic mechanism of ZDMA and MWCNTs. The study analyzes the impact of MWCNTs additive amount on the frictional wear of the internal mixer's metal end face. During the mixing process, ZDMA is grafted and polymerized onto rubber's macromolecular chains, forming ionic pairs with strong electrostatic interactions, creating a primarily reversible supramolecular network dominated by ion crosslinking. This ion crosslinking network, along with the three-dimensional mesh structure of MWCNTs, establishes a stable spatial structure within the rubber matrix. The study reveals that increasing the MWCNTs content to 3 phr reduces the aggregation of SiO 2 particles and ZDMA granules within the rubber matrix, resulting in reduced friction coefficients, roughness, and wear rates of the metal. However, exceeding 3 phr of MAA content leads to excessive MWCNT aggregation within the rubber matrix, increasing wear rates, roughness, and friction coefficients due to hindrance of rubber macromolecular chain crosslinking and reduced SiO 2 particle dispersion within the rubber matrix. These findings provide valuable insights into the dynamics of frictional wear in internal mixers. • Continuous mixer use erodes end faces, widens gaps, and hampers rubber performance. • Adding dynamic covalent bonds to rubber enhances self-repair, extending lifespan and cutting production costs. • MAA, ZnO, and MWCNTs create ZDMA/MWCNTs/rubber, studied for frictional wear impact. • Elevated MWCNTs levels (up to 3 phr) lower wear rates, roughness, and friction in rubber. • Excessive MAA (> 3 phr) increases wear, roughness, and friction by blocking crosslinking and reducing dispersion. [ABSTRACT FROM AUTHOR]

During the blending process, the choice of lubricant used in the internal mixer significantly affects the properties of composite materials. This study thoroughly investigates the mechanisms that enhance the mechanical properties and anti-wear characteristics of Natural Rubber/ Butadiene Rubber/Solution-Polymerized Styrene Butadiene Rubber composite materials by employing both commonly used lubricants and graphene-based lubricant mediums. The research offers data-driven insights to enhance material performance during internal mixer blending and protect the end-face metals. The incorporation of graphene as a lubricant additive results in its deposition on friction pair surfaces, forming a protective anti-wear layer that prevents direct contact between the friction pairs and effectively reduces wear. Throughout the blending process, the composite materials inevitably come into contact with the lubricant. This research reveals that the addition of lubricant improves the dispersion of SiO 2 particles while reducing aggregate formation. Consequently, the SiO 2 particles-TESPT-rubber crosslinking network becomes denser, significantly enhancing the performance of Natural Rubber/ Butadiene Rubber/Solution-Polymerized Styrene Butadiene Rubber composite materials. Specifically, when using commonly used lubricant mediums, the material's hardness, tensile strength, and tear strength increase by 0.88 %, 7.8 %, and 4.5 %, respectively. In contrast, under the graphene lubricant medium, these properties improve by 2.7 %, 16.8 %, and 24.9 %, respectively. Notably, Natural Rubber/ Butadiene Rubber/Solution-Polymerized Styrene Butadiene Rubber composite materials using the graphene lubricant medium experience substantial reductions in rolling resistance and improved anti-wet skid performance. When comparing Natural Rubber/ Butadiene Rubber/Solution-Polymerized Styrene Butadiene Rubber composite materials with and without lubricants, composites prepared with both commonly used lubricants and graphene lubricants show significant reductions in metal wear and changes in metal surface roughness. Metal wear decreases by 17.5 % and 28.7 %, respectively, while changes in metal surface roughness are reduced by 46.3 % and 68.7 %, respectively. • Choice of lubricant affects composite properties in blending. • Lubricants enhance SiO 2 dispersion, densifying networks, boosting properties. • Lubricants notably reduce metal wear, graphene ones most effective. [ABSTRACT FROM AUTHOR]

During prolonged operation, the end face of the internal mixer, a crucial component in rubber processing, experiences wear, resulting in an increased gap between the mixing chamber and the end face. This gap can lead to material leakage and reduced mixing efficiency, negatively impacting rubber properties. To address this issue, researchers have introduced dynamic covalent bonds into the molecular rubber chains, giving the material self-healing properties. This advancement is essential for extending rubber lifespan and reducing production costs. One common approach involves adding methacrylic acid (MAA) and excess zinc oxide (ZnO) to create ionic crosslinking networks, limiting covalent crosslinking and enabling in-situ polymerization of MAA/ZnO, resulting in self-healing capabilities. However, the strong acidity and corrosive nature of MAA can cause metal wear. In our study, we mechanically blend MAA with ZnO to produce zinc methacrylate (ZDMA)/rubber composites. We investigate the in-situ synthesis mechanism of MAA and ZnO and assess the impact of MAA on the friction and wear of the internal mixer's end face. Our findings reveal that ZDMA ion pairs form an "ion cross-linked network" within the rubber chain, hindering SiO 2 particle dispersion and increasing aggregation within the rubber matrix. This compromises dispersion and leads to abrasive wear from SiO 2 particles, corrosive wear from high-temperature water vapor, and corrosive wear from MAA. Additionally, excessive ZDMA self-polymerization alters SiO 2 particle agglomerates. The strong acidity of MAA and the "ion cross-linked network" within the rubber matrix significantly affect SiO 2 particle dispersion, friction coefficients, metal surface roughness, and metal wear. Our comprehensive analysis, including SEM, dispersion, RPA, metal surface morphology, and CSM friction wear tests, identifies the optimal cross-linking effect with the addition of 15 phr of MAA, resulting in a well-defined "ion cross-linked network" within the rubber matrix, enhancing rubber performance. However, SiO 2 particle dispersion is compromised, leading to increased agglomeration and heightened metal wear. • Prolonged operation of internal mixers causes wear, increasing the gap, impacting rubber quality. • Self-healing rubber with dynamic covalent bonds extends lifespan and reduces costs. • A method involving MAA and ZnO for self-healing, but MAA's acidity causes metal wear. • Blending MAA and ZnO into ZDMA/rubber composites affects dispersion and wear. • An optimal MAA amount enhances rubber performance but compromises SiO 2 dispersion and increases metal wear. [ABSTRACT FROM AUTHOR]