Search

Additive manufacturing (AM), specifically Directed Energy Deposition (DED)-Arc, holds great potential for the fabrication of individually designed components. In the construction industry, the demand for tailored steel nodes is increasing, particularly for large-scale structures, where high-strength steel deployment can significantly reduce material consumption and production time. However, the thermal material deposition process has a strong impact on the technical properties of high-strength steel. Parameters like heat input, interpass temperature (IPT), and cooling strategies modulate cooling times and peak temperatures in thermal cycles, which are crucial for estimating mechanical properties indispensable for safety certification. The development of digital twins or digital shadows emerges as the primary approach for quality assurance and certification, deploying real-time monitoring of manufacturing parameters such as voltage, current, wire feed, thermal history, and bead shapes. This data can be correlated with specific regions in the fabricated part to draw quality inferences. To interpret this data effectively, an understanding of the influence of these process parameters on resultant properties is indispensable. Given that the resulting microstructure strongly depends on the thermal history in AM parts, temperature monitoring during DED-Arc using thermography emerges as a promising method. This article aims at providing fundamental knowledge about phase transformations of a high strength steel feedstock under repeated reheating and gaining comprehensive knowledge about microstructural evolution during DED-Arc Additive Manufacturing. This is done by the analysis of time-temperature profiles, resulting microstructure and mechanical properties, linking it to CCT diagrams. A novel approach for describing the degree of tempering in different regions of the samples by deploying tempering parameters for anisothermal heat treatments is presented. By using this approach, an estimation about the resulting microstructure and hence the mechanical properties can be drawn.

This study aspires to evaluate the antibacterial and inhibitory effects of carbohydrate digestive enzymes in tree leaves that are widely distributed in the Mediterranean region. Leaves were sequentially extracted with solvents of increasing polarity. The results demonstrated a wide range of phenolic (3.5–770.7 mg gallic acid equivalent g−1) and flavonoid (0.2–321.3 mg catechin equivalent g−1) contents in leaf extracts. The minimum inhibitory and bactericidal concentration of leaf extracts was determined for six bacteria using the broth microdilution method. The polar extracts of carob, lentisk, and white mulberry leaves exerted strong antibacterial potency against Gram-positive bacteria, while the susceptibility of Escherichia coli on relative apolar extracts of carob, fig, and olive leaves was also observed. In parallel, the inhibitory effects of leaf extracts on carbohydrate digestive enzymes were evaluated. A robust inhibition of α-glucosidase was found for carob and lentisk leaf extracts, followed by extracts produced by white mulberry and olive leaves. Carob and lentisk leaves also act as a-amylase inhibitors at high concentrations. Overall, this study provides valuable data for the nutraceutical value of the “forgotten” treasure of Mediterranean tree leaves and assesses these plants as potential sources of antibacterial and carbohydrate digestive enzyme inhibitory agents for drug discovery.

Plants possess endless structural and chemical diversity, which is peerless with any synthetic library of small biomolecules, inspiring novel drug discovery. Plants are widely applied to encounter global health challenges such as antimicrobial resistance and diabetes. The objective of this work was to evaluate the antibacterial and antidiabetic potency of native plants grown in Cyprus. All plants were sequentially extracted with solvents of increasing polarity, namely hexane, acetone, methanol, and water. First, the phenolic and flavonoid contents of the extracts were assessed. Afterwards, the bacteriostatic and bactericidal potency of plant extracts were tested against a panel of six bacteria using the broth microdilution method, whereas the inhibitory effects on alpha-glucosidase and alpha-amylase enzymes were also determined with the employment of microplate assays. The results highlighted the superiority of Sarcopoterium spinosum as a potential enzyme inhibitor, while a knowledge base was also acquired for the inhibitory potential of all plants. Daucus carota, Ferula communis, and Tordylium.aegyptiacum displayed additionally outstanding bacteriostatic and bactericidal effects on Gram-positive bacteria at concentrations of 250 µg mL−1 and 500 µg mL−1. Overall, the present study describes the antibacterial and inhibitory activity against carbohydrate digestive enzymes of native plants grown in Cyprus delivering the first reports for many plant species.

Abstract Intravascular surgical instruments require precise navigation within narrow vessels, necessitating maximum flexibility, minimal diameter, and high degrees of freedom. Existing tools often lack control during insertion due to undesirable bending, limiting vessel accessibility and risking tissue damage. Next-generation instruments aim to develop hemocompatible untethered devices controlled by external magnetic forces. Achieving this goal remains complex due to testing and implementation challenges in clinical environments. Here we assess the operational effectiveness of hemocompatible untethered magnetic robots using an ex vivo porcine aorta model. The results demonstrate a linear decrease in the swimming speed of untethered magnetic robots as arterial blood flow increases, with the capability to navigate against a maximum arterial flow rate of 67 mL/min. The untethered magnetic robots effectively demonstrate locomotion in a difficult-to-access target site, navigating through the abdominal aorta and reaching the distal end of the renal artery.

Data from satellite, aircraft, drone, and ground-based measurements have already shown that canopy-scale sun-induced chlorophyll fluorescence (SIF) is tightly related to photosynthesis, which is linked to vegetation carbon assimilation. However, our ability to effectively use those findings are hindered by confounding factors, including canopy structure, fluctuations in solar radiation, and sun–canopy geometry that highly affect the SIF signal. Thus, disentangling these factors has become paramount in order to use SIF for monitoring vegetation functioning at the canopy scale and beyond. Active chlorophyll fluorescence measurements (FyieldLIF), which directly measures the apparent fluorescence yield, have been widely used to detect physiological variation of the vegetation at the leaf scale. Recently, the measurement of FyieldLIF has become feasible at the canopy scale, opening up new opportunities to decouple structural, biophysical, and physiological components of SIF at the canopy scale. In this study, based on top-of-canopy measurements above a mature deciduous forest, reflectance (R), SIF, SIF normalized by incoming photosynthetically active radiation (SIFy), FyieldLIF, and the ratio between SIFy and FyieldLIF (named Φk) were used to investigate the effects of canopy structure and shadows on the diurnal and seasonal dynamics of SIF. Further, random forest (RF) models were also used to not only predict FyieldLIF and Φk, but also provide an interpretation framework by considering additional variables, including the R in the blue, red, green, red-edge, and near-infrared bands; SIF; SIFy; and solar zenith angle (SZA) and solar azimuth angle (SAA). Results revealed that the SIF signal is highly affected by the canopy structure and sun–canopy geometry effects compared to FyieldLIF. This was evidenced by the weak correlations obtained between SIFy and FyieldLIF at the diurnal timescale. Furthermore, the daily mean SIF‾y captured the seasonal dynamics of daily mean F‾yieldLIF and explained 58 % of its variability. The findings also revealed that reflectance in the near-infrared (R-NIR) and the NIRv (the product of R-NIR and normalized difference vegetation index (NDVI)) are good proxies of Φk at the diurnal timescale, while their correlations with Φk decrease at the seasonal timescale. With FyieldLIF and Φk as outputs and the abovementioned variables as predictors, this study also showed that the RF models can explain between 86 % and 90 % of FyieldLIF, as well as 60 % and 70 % of Φk variations under clear-sky conditions. In addition, the predictor importance estimates for FyieldLIF RF models revealed that R at 410, 665, 740, and 830 nm; SIF; SIFy; SZA; and SAA emerged as the most useful and influential factors for predicting FyieldLIF, while R at 410, 665, 705, and 740 nm; SZA; and SAA are crucial for predicting Φk. This study highlighted the complexity of interpreting diurnal and seasonal dynamics of SIF in forest canopies. These dynamics are highly dependent on the complex interactions between the structure of the canopy, the vegetation biochemical properties, the illumination angles (SZA and SAA), and the light conditions (ratio of diffuse to direct solar radiation). However, such measurements are necessary to better separate the variability in SIF attributable to radiation and measurement conditions from the subtler variability attributable to plant physiological processes.

Extensive research efforts have been devoted to using greenhouse gas CO2 in upgrading bio-derived feedstock to value-added chemicals using the oxidative dehydrogenation route (CO2-ODH) with low-energy input. To realize the effective deployment of CO2-ODH at an industrial scale, it is imperative to advance the development of robust catalysts that can selectively catalyze C-H over C-C bonds, while simultaneously demonstrating thermodynamic stability to coke formation or sintering. Transition metal-based catalysts exhibit significant potential for being highly selective and reactive in the simultaneous conversion of CO2 and hydrocarbons, owing to their surface reducibility, well-balanced acid/base properties, and dynamic oxygen storage capacity. To stimulate further optimization, it's crucial to discover key design principles, potential trends and descriptors, and effective strategies to fine-tune the catalyst materials. This review comprehensively examines experimental and theoretical research aimed at pinpointing the key catalytic characteristics that affect selectivity in transition metal-based mono, bi, and multimetal oxides. It covers aspects like combinations of active metals and supports, effects of composition and alloying, interfacial structures, adsorption strengths, dynamics of in-situ restructuring, defect creation, surface morphology, and electronic properties, among others. We wrap up by suggesting approaches to overcome present obstacles in catalyst design and reactor technology, potentially bridging the lab-to-industry gap in this domain.

Gram-negative bacteria from the Bacteroidota phylum possess a type-IX secretion system (T9SS) for protein secretion, which requires cargoes to have a C-terminal domain (CTD). Structurally analysed CTDs are from Porphyromonas gingivalis proteins RgpB, HBP35, PorU and PorZ, which share a compact immunoglobulin-like antiparallel 3+4 β-sandwich (β1–β7). This architecture is essential as a P. gingivalis strain with a single-point mutant of RgpB disrupting the interaction of the CTD with its preceding domain prevented secretion of the protein. Next, we identified the C-terminus (‘motif C-t.’) and the loop connecting strands β3 and β4 (‘motif Lβ3β4’) as conserved. We generated two strains with insertion and replacement mutants of PorU, as well as three strains with ablation and point mutants of RgpB, which revealed both motifs to be relevant for T9SS function. Furthermore, we determined the crystal structure of the CTD of mirolase, a cargo of the Tannerella forsythia T9SS, which shares the same general topology as in Porphyromonas CTDs. However, motif Lβ3β4 was not conserved. Consistently, P. gingivalis could not properly secrete a chimaeric protein with the CTD of peptidylarginine deiminase replaced with this foreign CTD. Thus, the incompatibility of the CTDs between these species prevents potential interference between their T9SSs.

An attempt was made to evaluate the elongation level as a stressor on biodegradable starch films reinforced with nanoclay using a simple linear model. A total of 120 film units were subjected to increasing elongation levels and the exact break time of the failed units was monitored. Nine different attempts were made to fit the data distribution and the lognormal distribution was chosen as the most suitable because it resulted in the lowest values of the regression fit indices −2LL, AICc and BIC. Following the selection of the best fit, it was, generally, observed that an increase in the elongation level resulted in the decreasing exact break time of the films. Among several models, the best fit was provided by the simple linear model. Based on this model, the acceleration factor was estimated, and it was shown that it increased exponentially while increasing the elongation level. Finally, the probability of failure and the hazard rate of the film units as a function of the elongation level were estimated, demonstrating the applicability of this method as a tool for food packaging film failure prediction.

A destructive degradation model was applied on films made from different concentrations of starch, glycerol and nanoclay using various elongation levels as a stress variable at different stress times and stretch cycles. The log tensile quotient (logarithm of the tensile strength to the corresponding break cycle) was recorded as the response variable. The log tensile quotient increased, and the log exact break time decreased, as the elongation level increased. The treatment containing the highest starch and nanoclay and lowest glycerol content proved to be the most resistant to stress conditions and the most versatile in relation to the varying log tensile quotients, while the treatments containing the lowest nanoclay and highest glycerol contents, regardless of the starch concentration, manifested the lowest log tensile quotient at higher levels of log exact break time. According to multiple regression findings, the break cycle governed mostly the stress conditions in the degradation model, followed by the sample ID and the log exact break time. The term log tensile quotient, attempted for the first time on data concerning biodegradable films enhanced with nanoclay, seems very promising for deeper research due to its ability to retrieve predictive information from survival equations and to discriminate the difference between film structures.

The binary Fe–Ni system offers alloys with notably low linear coefficients of thermal expansion (CTE), contingent upon their Ni content. In this respect twin-wire arc additive manufacturing (T-WAAM) presents the opportunity of in-situ alloying through the simultaneous feeding of two metal wires into a weld pool to obtain desired alloy compositions. This study aims to deposit a graded wall with Ni contents targeted at 42, 46, and 52 wt% in the building direction of the wall, along with a block comprising of 46 wt% Ni, employing the T-WAAM approach. The results show effective incorporation of additional Ni into the weld pool and geometrically stable weld beads in the continuous metal transfer mode during the T-WAAM process. This mode led to the defect-free and chemically stable deposition of the graded wall and the block with average Ni contents of 42.3 ± 1.1, 45.8 ± 1.4, 52.6 ± 0.8 wt%, and 46.4 ± 0.9 wt%, respectively. The measured Curie temperatures of the as-deposited alloys and the mean CTE values of alloy 46 were found to be comparable to the commercial alloys. In summary, this study validates the feasibility of in-situ deposition of low thermal expansion alloy compositions, thereby enabling the possibility of on-demand thermal expansion properties.

Evidence shows that neurodegenerative and neuropsychiatric disorders are influenced by alterations in the gut microbiome. Various diseases have been linked to microbiome dysbiosis, yet there are inconclusive data regarding which microorganisms are associated with each disorder. The aim of our study is to systematically review the recent literature of the past decade to clarify whether the gut microbiome contributes to the understanding of pathogenesis and progression of neurodegenerative disorders. Most included studies showed a strong correlation between the relative abundance of certain microorganisms, mainly species of the phyla Firmicutes and Bacteroidetes, and disorders such as Parkinson’s disease (PD) and Alzheimer’s disease (AD). It is speculated that the microorganisms and their byproducts have a significant role in brain protein accumulation, neuro-inflammation, and gut permeability. The estimation of microbial populations could potentially improve clinical outcomes and hinder the progression of the disease. However, further research is needed to include more diseases and larger patient samples and identify specific species and subspecies associated with these disorders.

Hydroxycinnamic acids are an essential phenolic group in honey that are related with its diverse health effects. Furthermore, they can be considered as potential biomarkers for botanical and geographical origin. The extraction of hydroxycinnamic acids from honey requires complicated extraction techniques due to their low contents and matrix particularity. The goal of the present work was to develop a green sample preparation method for the solubilization of hydroxycinnamic acids in honey samples. Thus, a Box–Behnken design has been used to investigate the effect of four factors: (i) percentage of ethanol (60–90%, v/v), (ii) temperature (30–60 °C), (iii) solvent-honey ratio (10–30 mL g−1), and (iv) sonication time (10–40 min) on the contents of caffeic, chlorogenic, and ferulic acids. Based on the desirability index, the ultrasound-assisted mixing of honey with 60.0% (v/v) ethanol at a solvent-honey ratio of 10 mL g−1 for a period of 17.8 min at a temperature of 54.6 °C resulted in the maximum solubilization of hydroxycinnamates. Subsequently, the greenness of developed method was assessed and applied successfully on the analysis of honeys. The present study reports for first time the hydroxycinnamic acid fingerprint of multi-floral honey produced in Cyprus.

Verticillium dahliae (Vd) and Fusarium oxysporum f. sp. lycopersici (Fol) are two major fungal pathogens that infect tomato plants, causing significant challenges in their control since both pathogens can persist in the soil for several years even in the absence of a host plant and no effective fungicides are available at present. This study investigated the efficacy of two biocontrol formulations, Clonotri (containing Trichoderma and Clonostachys microorganisms) and Strepse (comprising Streptomyces and Pseudomonas microorganisms), against Vd and Fol and their impact on tomato fruit quality and yield under greenhouse conditions. The pathogenicity experiment demonstrated that the Clonotri formulation, containing Trichoderma and Clonostachys spores, significantly reduced Fusarium wilt disease by 32% compared to the control group. However, in the Vd pathogenicity experiment, the formulations did not exhibit disease reduction, although treatment with Strepse, containing Streptomyces and Pseudomonas microorganisms, resulted in a preserved total fruit number when compared to uninfected plants. Analysis of fruit quality attributes revealed no significant differences among the various interventions. Furthermore, Fol infection in the first fruit set significantly increased fruit firmness, while Vd infection resulted in elevated levels of total soluble solids in fruits. These findings demonstrate that the evaluated biocontrol formulations provide a degree of protection against fungal wilt pathogens in tomato plants and can increase yield in greenhouse conditions while having minimal impact on overall fruit quality attributes.

Objectives To develop an intensive training programme for ultrasound (US)-guided synovial tissue (ST) biopsy on knees and wrists in inflammatory arthritis and to assess the learning curve, patient tolerability, sample quality and trainees’ expectations.Methods Active or remission rheumatoid arthritis patients were enrolled. Nine trainees joined the 4-month programme in a centre experienced in performing US-guided ST biopsies consisting of four sequential phases: (1) observation, (2) performance of guided step-by-step phases, (3) execution of the whole procedure on paired joints (knees or wrists) of the same patient in parallel with the trainer and (4) performance of the procedure autonomously. Sample representativity was assessed by histology, and procedure-related adverse events were recorded. Before and after the programme, trainees’ expectations and perceptions were collected.Results 328 ST biopsy procedures were included. The rate of trainees’ informative samples was: (1) comparable to the trainers in active and remission knees, but lower in active wrists (70% for trainees vs 100% for trainers, p=0.06) in phase 3; (2) excellent on active knees and wrists (91.9% and 90.9% respectively) but lower (77.6%, p=0.0089) on remission knees in phase 4. Procedures performed by trainees did not affect patient tolerability. Trainees’ expectations about procedure-related invasiveness and pain infliction decreased while the difficulty of procedure execution on active wrists and remission knees remained perceived as moderately difficult.Conclusions This intensive training programme develops advanced skills in the performance of US-guided ST biopsy on knees and wrists, yielding high-quality specimens available for basic and translational studies on inflammatory joint diseases.

We investigate whether it is possible to distinguish chaotic time series from random time series using network theory. In this perspective, we selected four methods to generate graphs from time series: the natural, the horizontal, the limited penetrable horizontal visibility graph, and the phase space reconstruction method. These methods claim that the distinction of chaos from randomness is possible by studying the degree distribution of the generated graphs. We evaluated these methods by computing the results for chaotic time series from the 2D Torus Automorphisms, the chaotic Lorenz system, and a random sequence derived from the normal distribution. Although the results confirm previous studies, we found that the distinction of chaos from randomness is not generally possible in the context of the above methodologies.

Introduction: Individualized heparin and protamine management is increasingly used as a strategy to reduce coagulation activation and bleeding complications. While it is associated with increased heparin requirements during Cardiopulmonary Bypass (CPB), the impact on protamine administration remains controversial. We aim to investigate the effect of heparin level-guided monitoring on protamine dosing during cardiac surgery where low-anticoagulation protocols are implemented. Methods: This is a prospective, randomized, controlled trial. A total of 132 patients undergoing elective full-spectrum cardiac surgery with Minimal Invasive Extracorporeal Circulation (MiECC) were recruited. All patients were managed by the same anaesthetic, surgical and perfusion team. Patients were randomly allocated in two groups; the individualized heparin-protamine titration (IHPT) group and the conventional heparinization and reversal group by using ACT (cACT) with a 0.75:1, protamine: heparin ratio. Titration was accomplished with the Hepcon HMS Plus (Medtronic, Minneapolis, MN) system. The primary outcome of the study was the total protamine dose used. Secondary outcomes comprised of the total heparin dose, the percentage of patients achieving target ACT, 24-h transfusion requirements, postoperative bleeding, duration of mechanical ventilation, major morbidity and length of hospital stay. Patients in each group were divided in two subgroups according to the target ACT; those operated for coronary artery bypass grafting (CABG) using a target ACT >300 s and the rest (non-CABG) patients operated with a target ACT >400 s, respectively. Results: Protamine requirements were significantly reduced when IHPT was implemented; CABG (118 ± 24 mg vs 163 ± 61 mg; p < 0.001) and non-CABG cases (151 ± 46 mg vs 197 ± 45 mg; p < 0.001). Moreover, heparin requirements were significantly higher in the non-CABG subgroup managed with IHPT (34,539 ± 7658 IU vs 29,893 ± 9037 IU; p = 0.02). In overall, no significant differences were detected with respect to postoperative bleeding, transfusion of RBC or other blood products. Conclusions: Individualized heparin monitoring and management reduces protamine requirements in cardiac surgery with MiECC implementing reduced anticoagulation strategy. Trial registration: clinicaltrials.gov; NCT04215588. [ABSTRACT FROM AUTHOR]

An attempt was made to evaluate the elongation level as a stressor on biodegradable starch films reinforced with nanoclay using a simple linear model. A total of 120 film units were subjected to increasing elongation levels and the exact break time of the failed units was monitored. Nine different attempts were made to fit the data distribution and the lognormal distribution was chosen as the most suitable because it resulted in the lowest values of the regression fit indices −2LL, AICc and BIC. Following the selection of the best fit, it was, generally, observed that an increase in the elongation level resulted in the decreasing exact break time of the films. Among several models, the best fit was provided by the simple linear model. Based on this model, the acceleration factor was estimated, and it was shown that it increased exponentially while increasing the elongation level. Finally, the probability of failure and the hazard rate of the film units as a function of the elongation level were estimated, demonstrating the applicability of this method as a tool for food packaging film failure prediction. [ABSTRACT FROM AUTHOR]