Search

In broadband terahertz waves generated by femtosecond lasers, spatial chirp will be simultaneously produced with the introduction of angular dispersion. The chirp characteristics of the terahertz wave will directly affect the frequency response, bandwidth response, and intensity response of the terahertz sensor. To enhance the capability of terahertz sensors, it is necessary to control and improve the chirped characteristics of broadband terahertz sources. We generate a chirped terahertz wave via optical rectification in a LiNbO3 prism using the technique of pulse front tilt. The effect of the pump-beam spot size on THz generation is systematically studied. The pump's spot size is manipulated using a telescope system. With a pump spot diameter of 1.8 mm, the scanning spectrum of the THz pulse is narrower and is divided into multiple distinct peaks. In contrast, using a pump spot diameter of 3.7 mm leads to increased efficiency in the generation of THz pulses. Also, we investigate the underlying properties governing the generation of chirped terahertz pulses using varying pump pulse spot diameters. [ABSTRACT FROM AUTHOR]

It is crucial to enhance the efficiency of terahertz radiation in a single crystal for the application of intense field terahertz waves. We devise a trapezoidal lithium niobate prism that, upon side incidence of the terahertz wave, retroreflects the femtosecond laser onto the crystal's symmetric plane. The conversion efficiency of pump power to THz pulse power for circular cavity increases by 36% compared to that of the conventional cavity. The findings demonstrate that the utilization of sample multiplexing pump can significantly enhance the efficiency of terahertz generation. [ABSTRACT FROM AUTHOR]

An effective approach to manipulate terahertz (THz) waves involves the utilization of a device structure. In this particular investigation, we have successfully fabricated a SnS2 nanofilm device using femtosecond laser direct ablation. The passive and active polarization‐sensitive characteristics of the SnS2 nanofilm device were examined within the THz frequency range, employing different line spaces of 500, 600, and 700 μm. The combination of the device effect and SnS2 absorption led to an enhanced passive polarization modulation. Moreover, when an external electric field was applied to the SnS2 nanofilm device along the device line, persistent switching and linear modulation of THz wave transmission were observed. These findings indicate that the integration of material properties and device structure in this SnS2 device renders it highly suitable for applications in ultrafast THz switches, filters, and modulation devices. [ABSTRACT FROM AUTHOR]

The increasing enhancement in the modulation accuracy of spatial light modulators has garnered significant attention towards real-time control technology for light fields based on these modulators. It has been demonstrated that this technology possesses a remarkable capability to generate vector beams with arbitrary complex amplitude distributions. Nevertheless, past studies indicate that the generation of only one vector beam at a time has been observed. The simultaneous generation of numerous vector light fields can give rise to several challenges, including compromised picture quality, limited single-mode operation, and intricate optical path configurations. In pursuit of this objective, we present a novel methodology that integrates the coding methodology of modified off-axis interferometric holography with the idea of optical superposition. This technique facilitates the concurrent generation of several vector beams. In this study, we present a demonstration of the simultaneous creation of twelve vector beams using a single spatial light modulator (SLM) as a proof of concept. Significantly, this technology has the ability to generate an unlimited quantity of vector light fields concurrently under the assumption that the resolution of the SLM does not impose any limitations. The findings indicate that the imaging quality achieved by this technology is of a high standard. Furthermore, it is possible to separately control the beam waist radius, topological charge, polarization order, and extra phase of each beam. [ABSTRACT FROM AUTHOR]

Infections caused by Vibrio parahaemolyticus (V. parahaemolyticus) can be highly fatal, making rapid and sensitive detection of them is essential. A new optical fiber biosensor based on localized surface plasmon resonance (LSPR) phenomenon is developed in this paper. A tapered-in-tapered fiber structure based on MFM is constructed by using four-core fiber (FCF) and multi-mode fiber (MMF) to qualitatively detect different concentrations of V. parahaemolyticus. The sensor successfully excites the LSPR phenomenon and increases the attachment point of biomolecules on the probe surface by fixing gold nanoparticles (AuNPs), molybdenum disulfide nanoparticles (MoS 2 -NPs) and cerium dioxide nanorods (CeO 2 -NRs). The functionalization of polyclonal antibodies on the probe surface can improve the specificity of the sensor. The linear detection range of the developed sensor was 1 × 10 0 -1 × 10 7 CFU/mL, the sensitivity was 1.61 nm/[CFU/mL], and the detection limit was 0.14 CFU/mL. In addition, the reusability, reproducibility, stability, and selectivity of the sensor probe are also tested, which shows that the sensor has great application prospects.

Blood sugar is an important biomedical parameter of diabetic patients. The current blood sugar testing is based on an invasive method, which is not very friendly for patients who require long-term monitoring, while the non-invasive method is still in the developing stage. In this paper, we design a non-invasive and highly sensitive terahertz wave detector with Co 3 Sn 2 S 2 semimetal thin film to test sugar concentration. As different concentrations have inconsistent responses to terahertz wave, we can deduce the concentration of the sugar solution to realize real-time highly sensitive detection of blood sugar concentration. This novel method can be further expanded to 6 G edge intelligence for non-invasive and real-time monitoring of blood sugar, and promote the development of 6 G technology., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 Optica Publishing Group.)