Search

As opposed to conventional training methods tailored to minimize a given statistical metric or task-agnostic loss (e.g., mean squared error), Decision-Focused Learning (DFL) trains machine learning models for optimal performance in downstream decision-making tools. We argue that DFL can be leveraged to learn the parameters of system dynamics, expressed as constraint of the convex optimization control policy, while the system control signal is being optimized, thus creating an end-to-end learning framework. This is particularly relevant for systems in which behavior changes once the control policy is applied, hence rendering historical data less applicable. The proposed approach can perform system identification - i.e., determine appropriate parameters for the system analytical model - and control simultaneously to ensure that the model's accuracy is focused on areas most relevant to control. Furthermore, because black-box systems are non-differentiable, we design a loss function that requires solely to measure the system response. We propose pre-training on historical data and constraint relaxation to stabilize the DFL and deal with potential infeasibilities in learning. We demonstrate the usefulness of the method on a building Heating, Ventilation, and Air Conditioning day-ahead management system for a realistic 15-zone building located in Denver, US. The results show that the conventional RC building model, with the parameters obtained from historical data using supervised learning, underestimates HVAC electrical power consumption. For our case study, the ex-post cost is on average six times higher than the expected one. Meanwhile, the same RC model with parameters obtained via DFL underestimates the ex-post cost only by 3%., Comment: 12 pages, 9 figures, submitted to ACM e-energy 2025

PAX (antiProtonic Atom X-ray spectroscopy) is a new experiment with the aim to test strong-field quantum electrodynamics (QED) effects by performing high-precision x-ray spectroscopy of antiprotonic atoms. By utilizing advanced microcalorimeter detection techniques and a low-energy antiproton beam provided by the ELENA ring at CERN, gaseous targets will be used for the creation of antiprotonic atoms, and the measurement of transitions between circular Rydberg states will be conducted with up to two orders of magnitude improved accuracy over previous studies using high-purity germanium detectors. Our approach eliminates the longstanding issue of nuclear uncertainties that have hindered prior studies using highly charged ions, thus enabling direct and purely QED-focused measurements. By precisely probing atomic systems with electric fields up to two orders of magnitude above the Schwinger limit, PAX will test vacuum polarization and second-order QED corrections, opening new frontiers in fundamental physics and uncovering potential pathways to physics beyond the Standard Model.

Pressure is a key parameter for tuning or revealing superconductivity in materials and compounds. Many measurements of superconducting phase transition temperatures have been conducted using diamond anvil cells (DACs), which provide a wide pressure range and enable concomitant microscopic structural characterization of the sample. However, the inherently small sample volumes in DACs complicate the unambiguous detection of the Meissner effect, the hallmark of superconductivity. Recently, the Meissner effect in superconductors within a DAC was successfully demonstrated using diamond nitrogen-vacancy (N-V) widefield magnetometry, a non-invasive optical technique. In this work, we show that N-V magnetometry can also map superconductivity with micrometer resolution. We apply this technique to a microcrystal of HgBa$_2$Ca$_2$Cu$_3$O$_{8+\delta}$ (Hg-1223) mercury-based cuprate superconductor under 4 GPa of pressure. The method is capable to detect the magnetic field expulsion and heterogeneities in the sample, visible in a set of characteristic parameters as the local critical temperature $T_{c}$. Flux pinning zones are identified through flux trapping maps. This approach could enable detailed investigations of superconductivity of a broad range of materials under high-pressure conditions.

Context. The MINCE (Measuring at Intermediate Metallicity Neutron-Capture Elements) project aims to provide high quality neutron-capture abundances measurements in several hundred stars at intermediate metallicity,-2.5 < [Fe/H] < -1.5. This project will shed light on the origin of the neutron-capture elements and the chemical enrichment of the Milky Way. Aims. The goal of this work is to chemically characterize the second sample of the MINCE project and compare the abundances with the galactic chemical evolution model at our disposal. Methods. We performed a standard abundance analysis based on 1D LTE model atmospheres on high-resolution and high-signal-to-noise-ratio UVES spectra. Results. We provide the kinematic classification (i.e., thin disk, thick disk, thin-to-thick disk, halo, Gaia Sausage Enceladus, Sequoia) of 99 stars and the atmospheric parameters for almost all stars. We derive the abundances for light elements (from Na to Zn) and neutron-capture elements (Rb, Sr, Y, Zr, Ba, La, Ce, Pr, Nd, Sm, Eu) in a subsample of 32 stars in the metallicity range -2.5 < Fe/H] < -1.00. In the subsample of 32 stars, we identify 8 active stars exhibiting (inverse) P-Cygni profile and one Li-rich star, CD 28-11039. We find a general agreement between the chemical abundances and the stochastic model computed for the chemical evolution of the Milky Way halo for the elements Mg, Ca, Si, Ti, Sc, Mn, Co, Ni, Zn, Rb, Sr, Y, Zr, Ba, La, and Eu . Conclusions. The MINCE project has already significantly increased the number of neutron-capture elements measurements in the intermediate metallicity range. The results from this sample are in perfect agreement with the previous MINCE sample. The good agreement between the chemical abundances and the chemical evolution model of the Galaxy supports the nucleosynthetic processes adopted to describe the origin of the n-capture elements., Comment: 33 pages, 15 figures, 11 tables

NCORES was a large observing program on the ESO HARPS spectrograph, dedicated to measuring the masses of Neptune-like and smaller transiting planets discovered by the TESS satellite using the radial velocity technique. This paper presents an overview of the programme, its scientific goals and published results, covering 35 planets in 18 planetary systems. We present spectrally derived stellar characterisation and mass constraints for five additional TOIs where radial velocity observations found only marginally significant signals (TOI-510.01, $M_p=1.08^{+0.58}_{-0.55}M_\oplus$), or found no signal (TOIs 271.01, 641.01, 697.01 and 745.01). A newly detected non-transiting radial velocity candidate is presented orbiting TOI-510 on a 10.0d orbit, with a minimum mass of $4.82^{+1.29}_{-1.26}M_\oplus$, although uncertainties on the system architecture and true orbital period remain. Combining the NCORES sample with archival known planets we investigate the distribution of planet masses and compositions around and below the radius gap, finding that the population of planets below the gap is consistent with a rocky composition and ranges up to a sharp cut-off at $10M_\oplus$. We compare the observed distribution to models of pebble- and planetesimal-driven formation and evolution, finding good broad agreement with both models while highlighting interesting areas of potential discrepancy. Increased numbers of precisely measured planet masses in this parameter space are required to distinguish between pebble and planetesimal accretion., Comment: Accepted to MNRAS

Domain generalization aims to find ways for deep learning models to maintain their performance despite significant domain shifts between training and inference datasets. This is particularly important for models that need to be robust or are costly to train. LiDAR perception in autonomous driving is impacted by both of these concerns, leading to the emergence of various approaches. This work addresses the challenge by proposing a geometry-based approach, leveraging the sequential structure of LiDAR sensors, which sets it apart from the learning-based methods commonly found in the literature. The proposed method, called 3DLabelProp, is applied on the task of LiDAR Semantic Segmentation (LSS). Through extensive experimentation on seven datasets, it is demonstrated to be a state-of-the-art approach, outperforming both naive and other domain generalization methods.

Head-related transfer functions (HRTFs) with dense spatial grids are desired for immersive binaural audio generation, but their recording is time-consuming. Although HRTF spatial upsampling has shown remarkable progress with neural fields, spatial upsampling only from a few measured directions, e.g., 3 or 5 measurements, is still challenging. To tackle this problem, we propose a retrieval-augmented neural field (RANF). RANF retrieves a subject whose HRTFs are close to those of the target subject from a dataset. The HRTF of the retrieved subject at the desired direction is fed into the neural field in addition to the sound source direction itself. Furthermore, we present a neural network that can efficiently handle multiple retrieved subjects, inspired by a multi-channel processing technique called transform-average-concatenate. Our experiments confirm the benefits of RANF on the SONICOM dataset, and it is a key component in the winning solution of Task 2 of the listener acoustic personalization challenge 2024., Comment: Accepted to ICASSP 2025

Improving the efficiency of photothermal (PT) therapies and photoacoustic (PA) imaging at the microscopic scale hinges on developing multiphoton-absorbing photothermal molecules or contrast agents that operate in the near-infrared (NIR) range. These advanced agents or molecules will enable excitation with NIR lasers, in an improved transparency range for biological tissues, while enabling minute, highly localized spatial control of the excitation area. However, progress in this field requires innovative experimental techniques to characterize photothermal and photoacoustic effects under multiphoton excitation. In this article, we showcase a study of a model organometallic molecular compound excited via two-photon absorption (2PA) using femtosecond laser pulses. Based on a time-domain Brillouin scattering technique, well adapted for investigating ultrafast nonlinear optical absorption processes in ultrathin films on substrates, we determine the effective nonlinear absorption coefficients of the compound directly linked to PT/PA. Our findings provide a practical approach for exploring and optimizing nonlinear PT/PA absorbers and contrast agents.

- An algorithm for calculating the radiation field of a charged point particle performing a spiral motion in an infinite cylindrical waveguide with a multilayer side wall is found. The number of layers and their filling is arbitrary. The axis of the spiral is aligned with the axis of the waveguide, so that the geometry of the problem has cylindrical symmetry. Explicit expressions for modal frequency distributions and equations for resonant frequencies for single-layer and double-layer waveguides are given. Examples of graphical constructions of modal frequency distributions of modes for single-layer (resistive), double-layer (metal-dielectric) and triple-layer (metal-dielectric with internal NEG coating) waveguides are presented., Comment: 10 pages, 6 figures

Deep learning has shown impressive results obtained at the cost of training huge neural networks. However, the larger the architecture, the higher the computational, financial, and environmental costs during training and inference. We aim at reducing both training and inference durations. We focus on Neural Architecture Growth, which can increase the size of a small model when needed, directly during training using information from the backpropagation. We expand existing work and freely grow neural networks in the form of any Directed Acyclic Graph by reducing expressivity bottlenecks in the architecture. We explore strategies to reduce excessive computations and steer network growth toward more parameter-efficient architectures.

Reconfigurable intelligent surfaces (RISs) are a promising technology for enhancing cellular network performance and yielding additional value to network operators. This paper proposes a techno-economic analysis of RIS-assisted cellular networks to guide operators in deciding between deploying additional RISs or base stations (BS). We assume a relative cost model that considers the total cost of ownership (TCO) of deploying additional nodes, either BSs or RISs. We assume a return on investment (RoI) that is proportional to the system's spectral efficiency. The latter is evaluated based on a stochastic geometry model that gives an integral formula for the ergodic rate in cellular networks equipped with RISs. The marginal RoI for any investment strategy is determined by the partial derivative of this integral expression with respect to node densities. We investigate two case studies: throughput enhancement and coverage hole mitigation. These examples demonstrate how operators could determine the optimal investment strategy in scenarios defined by the current densities of BSs and RISs, and their relative costs. Numerical results illustrate the evolution of ergodic rates based on the proposed investment strategy, demonstrating the investment decision-making process while considering technological and economic factors. This work quantitatively demonstrates that strategically investing in RISs can offer better system-level benefits than solely investing in BS densification., Comment: This document supports a work submitted to WiOpt2025, including the supplementary mathematical verification in the appendix

The LIGO-Virgo-KAGRA network in the upcoming A+ era with upgrades of both Advanced LIGO and Advanced Virgo will enable more frequent and precise observations of binary neutron star (BNS) mergers, improving constraints on the neutron star equation of state (EOS). In this study, we applied reduced order quadrature techniques for full parameter estimation of 3,000 simulated gravitational wave signals from BNS mergers at A+ sensitivity following three EOS models: HQC18, SLY230A, and MPA1. We found that tidal deformability tends to be overestimated at higher mass and underestimated at lower mass. We postprocessed the parameter estimation results to present our EOS recovery accuracies, identify biases within EOS constraints and their causes, and quantify the needed corrections., Comment: 16 pages, 6 figures, 1 table

Large Neighbourhood Search (LNS) is a powerful heuristic framework for solving Mixed-Integer Programming (MIP) problems. However, designing effective variable selection strategies in LNS remains challenging, especially for diverse sets of problems. In this paper, we propose an approach that integrates Machine Learning (ML) within the destroy operator of LNS for MIPs with a focus on minimal offline training. We implement a modular LNS matheuristic as a test bench to compare different LNS heuristics, including our ML-enhanced LNS. Experimental results on the MIPLIB 2017 dataset demonstrate that the matheuristic can significantly improve the performance of state-of-the-art solvers like Gurobi and SCIP. We conduct analyses on noisy oracles to explore the impact of prediction accuracy on solution quality. Additionally, we develop techniques to enhance the ML model through loss adjustments and sampling routines. Our findings suggest that while random LNS remains competitive, our Supervised LNS (SLNS) outperforms other baselines and helps set the foundation for future research on ML for LNS methods that are both efficient and general.

This paper defines a new model which incorporates three key ingredients of a large class of wireless communication systems: (1) spatial interactions through interference, (2) dynamics of the queueing type, with users joining and leaving, and (3) carrier sensing and collision avoidance as used in, e.g., WiFi. In systems using (3), rather than directly accessing the shared resources upon arrival, a customer is considerate and waits to access them until nearby users in service have left. This new model can be seen as a missing piece of a larger puzzle that contains such dynamics as spatial birth-and-death processes, the Poisson-Hail model, and wireless dynamics as key other pieces. It is shown that, under natural assumptions, this model can be represented as a Markov process on the space of counting measures. The main results are then two-fold. The first is on the shape of the stability region and, more precisely, on the characterization of the critical value of the arrival rate that separates stability from instability. The second is of a more qualitative or perhaps even ethical nature. There is evidence that for natural values of the system parameters, the implementation of sensing and collision avoidance stabilizes a system that would be unstable if immediate access to the shared resources would be granted. In other words, for these parameters, renouncing greedy access makes sharing sustainable, whereas indulging in greedy access kills the system., Comment: submitted to IEEE Journal

The radio access network (RAN) landscape is undergoing a transformative shift from traditional, communication-centric infrastructures towards converged compute-communication platforms. This article introduces AI-RAN which integrates both RAN and artificial intelligence (AI) workloads on the same infrastructure. By doing so, AI-RAN not only meets the performance demands of future networks but also improves asset utilization. We begin by examining how RANs have evolved beyond mobile broadband towards AI-RAN and articulating manifestations of AI-RAN into three forms: AI-for-RAN, AI-on-RAN, and AI-and-RAN. Next, we identify the key requirements and enablers for the convergence of communication and computing in AI-RAN. We then provide a reference architecture for advancing AI-RAN from concept to practice. To illustrate the practical potential of AI-RAN, we present a proof-of-concept that concurrently processes RAN and AI workloads utilizing NVIDIA Grace-Hopper GH200 servers. Finally, we conclude the article by outlining future work directions to guide further developments of AI-RAN., Comment: 7 pages, 5 figures

Purpose : Planning a transition towards sustainable carbon neutrality at the organization level raises several accounting challenges. This paper aims to shed light on key challenges, highlight answers from current accounting standards and guidance, point out potential inconsistencies or limits, and outline potential solutions from the industrial ecology community through systemic environmental assessment tools, such as life cycle assessment (LCA) and environmentally-extended input-output (EEIO) analysis. Results and discussion: We propose a Measure-Reduce-Neutralize-Control sequence allowing organizations to plan their sustainable net-zero strategy, and discuss 24 accounting challenges occurring within this sequence. We then outline ways forward for organizations planning their carbon neutrality trajectory, pointing to existing resources, and for guidelines providers and the industrial ecology communities to address current limitations in the development of future accounting methods and guidelines. Overarching solutions to many accounting issues are to develop comprehensive, open-source, and high-quality life cycle inventory databases, to enable improved dynamic assessments and prospective LCA through integrated assessment models, to refine methods for assessing mineral scarcity and environmental impacts, the supply in some metals being expected to be a bottleneck to the energy transition, and to identify the appropriate climate metrics for planning sustainable carbon neutrality pathways at the organizational level.

Home Energy Management Systems (HEMSs) help households tailor their electricity usage based on power system signals such as energy prices. This technology helps to reduce energy bills and offers greater demand-side flexibility that supports the power system stability. However, residents who lack a technical background may find it difficult to use HEMSs effectively, because HEMSs require well-formatted parameterization that reflects the characteristics of the energy resources, houses, and users' needs. Recently, Large-Language Models (LLMs) have demonstrated an outstanding ability in language understanding. Motivated by this, we propose an LLM-based interface that interacts with users to understand and parameterize their ``badly-formatted answers'', and then outputs well-formatted parameters to implement an HEMS. We further use Reason and Act method (ReAct) and few-shot prompting to enhance the LLM performance. Evaluating the interface performance requires multiple user--LLM interactions. To avoid the efforts in finding volunteer users and reduce the evaluation time, we additionally propose a method that uses another LLM to simulate users with varying expertise, ranging from knowledgeable to non-technical. By comprehensive evaluation, the proposed LLM-based HEMS interface achieves an average parameter retrieval accuracy of 88\%, outperforming benchmark models without ReAct and/or few-shot prompting., Comment: 13 pages conference paper

Linear fusion is a cornerstone of estimation theory. Implementing optimal linear fusion requires knowledge of the covariance of the vector of errors associated with all the estimators. In distributed or cooperative systems, the cross-covariance terms cannot be computed, and to avoid underestimating the estimation error, conservative fusions must be performed. A conservative fusion provides a fused estimator with a covariance bound that is guaranteed to be larger than the true, but computationally intractable, covariance of the error. Previous research by Reinhardt \textit{et al.} proved that, if no additional assumption is made about the errors of the estimators, the minimal bound for fusing two estimators is given by a fusion called Covariance Intersection (CI). In distributed systems, the estimation errors contain independent and correlated terms induced by the measurement noises and the process noise. In this case, CI is no longer the optimal method. Split Covariance Intersection (SCI) has been developed to take advantage of the uncorrelated components. This paper extends SCI to also take advantage of the correlated components. Then, it is proved that the new fusion provides the optimal conservative fusion bounds for two estimators, generalizing the optimality of CI to a wider class of fusion schemes. The benefits of this extension are demonstrated in simulations., Comment: IEEE Transactions on Automatic Control, In press

The intracluster light (ICL) is an important tracer of a galaxy cluster's history and past interactions. However, only small samples have been studied to date due to its very low surface brightness and the heavy manual involvement required for the majority of measurement algorithms. Upcoming large imaging surveys such as the Vera C. Rubin Observatory's Legacy Survey of Space and Time are expected to vastly expand available samples of deep cluster images. However, to process this increased amount of data, we need faster, fully automated methods to streamline the measurement process. This paper presents a machine learning model designed to automatically measure the ICL fraction in large samples of images, with no manual preprocessing required. We train the fully supervised model on a training dataset of 50,000 images with injected artificial ICL profiles. We then transfer its learning onto real data by fine-tuning with a sample of 101 real clusters with their ICL fraction measured manually using the surface brightness threshold method. With this process, the model is able to effectively learn the task and then adapt its learning to real cluster images. Our model can be directly applied to Hyper Suprime-Cam images, processing up to 500 images in a matter of seconds on a single GPU, or fine-tuned for other imaging surveys such as LSST, with the fine-tuning process taking just 3 minutes. The model could also be retrained to match other ICL measurement methods. Our model and the code for training it is made available on GitHub., Comment: Accepted for publication in ApJ; 20 pages, 9 figures

In the context of holomorphic families of ${\mathbb P}^k$ endomorphisms, we show that various notions of stability are equivalent. This allows us to both extend and simplify the architecture of the proof of certain results of [BBD], Comment: 7 pages

Neutrino transport in compact objects is an inherently challenging multi-dimensional problem. This difficulty is compounded if one includes flavor transformation -- an intrinsically quantum phenomenon requiring one to follow the coherence between flavors and thus necessitating the introduction of complex numbers. To reduce the computational burden, simulations of compact objects that include neutrino transport often make use of momentum-angle-integrated moments (the lowest order ones being commonly referred to as the energy density and flux) and these quantities can be generalized to include neutrino flavor, i.e., they become quantum moments. Numerous finite-volume approaches to solving the moment evolution equations for classical neutrino transport have been developed based on solving a Riemann problem at cell interfaces. In this paper we describe our generalization of a Riemann solver for quantum moments, specifically decomposing complex numbers in terms of a (signed) magnitude and phase instead of real and imaginary parts. We then test our new algorithm in numerous cases showing a neutrino fast flavor instability, varying from toy models with analytic solutions to snapshots from neutron star merger simulations. Compared to previous algorithms for neutrino transport with flavor mixing, we find uniformly smaller growth rates of the flavor transformation along with concomitantly larger length-scales, and that the results are a better match with the growth rates seen from multi-angle codes., Comment: 31 pages, 3 appendices, 25 figures

Problem-based learning benefits from situations taken from real life, which arouse student interest. The shooting of Rwanda president aircraft on April 6th, 1994 is still unsolved. We discuss the methods to infer informations and conclusions about where the aircraft was shot and its trajectory during its fall, as well as about the place from which the missiles were launched, their trajectory and type. To this goal, we compile expert reports, witness indications and other public sources, then translate plain language sentences into quantitative equalities and inequalities applied to geometry and mechanics at undergraduate level. The precision of each result is discussed and propagated in order to ensure a proper assessment of the hypotheses and a traceability of their consequences. Overall, the precision discussion can train the students critical mind, and teach inference methods which are routinely used in several fields of physics research. In addition, it demonstrates the importance and limits of scientific expertise during a judiciary process.

For semiconductor device fabrication, Pulsed Laser Annealing (PLA) offers significant advantages over conventional thermal processes. Notably, it can provide ultrafast (~ns) and high temperature profiles ($>1000^\circ$C). When the maximum temperature exceeds the melting point, a solid-liquid phase transition is observed, immediately followed by rapid recrystallization. This unique annealing mechanism gives raises questions about dopant diffusion and residual defects, in not only in the recrystallized region, but also just below it. As power devices require micrometer-sized junctions, high laser energy densities are needed, which were proved to promote the incorporation of complex impurities from the surface and the creation of defects at the liquid/solid interface. This paper reports on the impact of laser annealing at high energy densities (up to 8.0 J/cm$^2$) on the leakage current, using Schottky and PN diodes, and DLTS measurements. Various laser annealing conditions were used: energy densities between 1.7 and 8.0 J/cm$^2$ with 1 to 10 pulses. Our results suggest that the liquid and solid solubility of vacancies in silicon are fixed by the maximum temperature reached, so to the energy density. Increasing the number of laser pulses allows, not only to reach this maximum vacancy concentration but also to promote their diffusion towards the surface. Concomitantly, the in-diffusion of complex impurities inside the melted region allows the coupling between both defect types to create trap centers, responsible for the degradation of the leakage current.

Low-temperature luminescence spectra reveal the presence of two independant populations of GaN excitons within a $\mathrm{GaN/AlGaN/GaN/Al_2O_3}$ heterostructure in which a thick (1.5 $\mathrm{\mu m}$) AlGaN layer separates a thin (150 nm) top GaN layer and a thick (3.5 $\mathrm{\mu m}$) bottom GaN layer grown on sapphire. The presence of these two spectrally-distinct families of excitons in each GaN layer of the heterostructure is demonstrated using three different experimental methods: (i) low-power $\mathrm{\mu}$-photoluminescence ($\mathrm{\mu PL}$) using laser excitation sources with wavelengths above and below the AlGaN bandgap, (ii) $\mathrm{\mu PL}$ as a function of optically injected free carrier density, and (iii) quantitative numerical simulation of the $\mathrm{\mu}$-Reflectivity ($\mathrm{\mu R}$). One major impact of the built-in electric field is the reduction of the excitonic lifetime in the GaN surface layer, which transitions from less than 10 ps in the presence of the built-in electric field to the bulk lifetime (90 ps) when the field is screened. This increase in the excitonic lifetime is related to the modification of the band structure in the presence of optically injected free carriers. The effect of these lifetime variations on the luminescence spectra is analyzed. Lastly, we provide an estimate of the Mott density in GaN as $n_{\mathrm{Mott}} = 4\times 10^{17}\, \mathrm{cm^{-3}}$ at 130 K, consistent with values reported in the literature and accounting for the free carrier density required to screen the electric field.

This study reveals the vulnerabilities of Wireless Local Area Networks (WLAN) sensing, under the scope of joint communication and sensing (JCAS), focusing on target spoofing and deceptive jamming techniques. We use orthogonal frequency-division multiplexing (OFDM) to explore how adversaries can exploit WLAN's sensing capabilities to inject false targets and disrupt normal operations. Unlike traditional methods that require sophisticated digital radio-frequency memory hardware, we demonstrate that much simpler software-defined radios can effectively serve as deceptive jammers in WLAN settings. Through comprehensive modeling and practical experiments, we show how deceptive jammers can manipulate the range-Doppler map (RDM) by altering signal integrity, thereby posing significant security threats to OFDM-based JCAS systems. Our findings comprehensively evaluate jammer impact on RDMs and propose several jamming strategies that vary in complexity and detectability.

Bayesian inference is conceptually elegant, but calculating posterior expectations can entail a heavy computational cost. Monte Carlo methods are reliable and supported by strong asymptotic guarantees, but do not leverage smoothness of the integrand. Solving Stein equations has emerged as a possible alternative, providing a framework for numerical approximation of posterior expectations in which smoothness can be exploited. However, existing numerical methods for Stein equations are associated with high computational cost due to the need to solve large linear systems. This paper considers the combination of iterative linear solvers and preconditioning strategies to obtain fast approximate solutions of Stein equations. Our main finding is that these methods can be effective, but that the performance of different preconditioning strategies is context-dependent, so that no single strategy can be universally preferred.

The early stage of a heavy-ion collision is marked by rapid entropy production and the transition from a gluon saturated initial condition to a plasma of quarks and gluons that evolves hydrodynamically. However, during the early times of the hydrodynamic evolution, the chemical composition of the QCD medium is still largely unknown. We present a study of quark chemical equilibration in the (Q)GP using a novel model of viscous hydrodynamic evolution in partial chemical equilibrium. Motivated by the success of gluon saturated initial condition models, we initialize the QCD medium as a completely gluon dominated state. Local quark production during the hydrodynamic phase is then simulated through the evolution of time-dependent fugacities for each independent quark flavor, with the timescales set as free parameters to compare different rates of equilibration. We present the results of complete heavy-ion collision simulations using this partial chemical equilibrium model, and show the effects on hadronic and electromagnetic observables. In particular, we show that the development of flow is sensitive to the equilibration timescale, providing an empirical way to probe the chemical equilibration of the QCD medium., Comment: 18 pages, 17 figures

Anisotropic mesh adaptation with Riemannian metrics has proven effective for generating straight-sided meshes with anisotropy induced by the geometry of interest and/or the resolved physics. Within the continuous mesh framework, anisotropic meshes are thought of as discrete counterparts to Riemannian metrics. Ideal, or unit, simplicial meshes consist only of simplices whose edges exhibit unit or quasi-unit length with respect to a given Riemannian metric. Recently, mesh adaptation with high-order (i.e., curved) elements has grown in popularity in the meshing community, as the additional flexibility of high-order elements can further reduce the approximation error. However, a complete and competitive methodology for anisotropic and high-order mesh adaptation is not yet available. The goal of this paper is to address a key aspect of metric-based high-order mesh adaptation, namely, the adequacy between a Riemannian metric and high-order simplices. This is done by extending the notions of unit simplices and unit meshes, central to the continuous mesh framework, to high-order elements. The existing definitions of a unit simplex are reviewed, then a broader definition involving Riemannian isometries is introduced to handle curved and high-order simplices. Similarly, the notion of quasi-unitness is extended to curved simplices to tackle the practical generation of high-order meshes. Proofs of concept for unit and (quasi-)isometric meshes are presented in two dimensions., Comment: 24 pages, 12 figures

The nucleation and/or spreading of bubbles in water under tension (due to water evaporation) can be problematic for most plants along the ascending sap network from root to leaves, named xylem. Due to global warming, trees facing drought conditions are particularly threatened by the formation of such air embolisms, which spreads intermittently and hinder the flow of sap and could ultimately result in their demise. PDMS-based biomimetic leaves simulating evapotranspiration have demonstrated that, in a linear configuration, the existence of a slender constriction in the channel allows for the creation of intermittent embolism propagation (as an interaction between the elasticity of the biomimetic leaf (mainly the deformable ceiling of the microchannels) and the capillary forces at the air/water interfaces) \cite{Keiser2022}-\cite{keiser2024}. Here we use analog PDMS-based biomimetic leaves in 1d and 2d. To better explore the embolism spreading mechanism, we add to the setup an additional technique, allowing to measure directly the microchannel's ceiling deformation versus time, which corresponds to the pressure variations. We present here such a method that allows to have quantitative insights in the dynamics of embolism spreading. The coupling between channel deformations and the Laplace pressure threshold explains the observed elastocapillary dynamics.

The planar three-gluon form factor for the chiral stress tensor operator in planar maximally supersymmetric Yang-Mills theory is an analog of the Higgs-to-three-gluon scattering amplitude in QCD. The amplitude (symbol) bootstrap program has provided a wealth of high-loop perturbative data about this form factor, with results up to eight loops available. The symbol of the form factor at $L$ loops is given by words of length $2L$ in six letters with associated integer coefficients. In this paper, we analyze this data, describing patterns of zero coefficients and relations between coefficients. We find many sequences of words whose coefficients are given by closed-form expressions which we expect to be valid at any loop order. Moreover, motivated by our previous machine-learning analysis, we identify simple recursion relations that relate the coefficient of a word to the coefficients of particular lower-loop words. These results open an exciting door for understanding scattering amplitudes at all loop orders., Comment: 28 pages, 1 figure, 5 tables

The search for resonant mass bumps in invariant-mass distributions remains a cornerstone strategy for uncovering Beyond the Standard Model (BSM) physics at the Large Hadron Collider (LHC). Traditional methods often rely on predefined functional forms and exhaustive computational and human resources, limiting the scope of tested final states and selections. This work presents BumpNet, a machine learning-based approach leveraging advanced neural network architectures to generalize and enhance the Data-Directed Paradigm (DDP) for resonance searches. Trained on a diverse dataset of smoothly-falling analytical functions and realistic simulated data, BumpNet efficiently predicts statistical significance distributions across varying histogram configurations, including those derived from LHC-like conditions. The network's performance is validated against idealized likelihood ratio-based tests, showing minimal bias and strong sensitivity in detecting mass bumps across a range of scenarios. Additionally, BumpNet's application to realistic BSM scenarios highlights its capability to identify subtle signals while managing the look-elsewhere effect. These results underscore BumpNet's potential to expand the reach of resonance searches, paving the way for more comprehensive explorations of LHC data in future analyses.

In the past decade, photoemission orbital tomography (POT) has evolved into a powerful tool to investigate the electronic structure of organic molecules adsorbed on surfaces. Here we show that POT allows for the comprehensive experimental identification of all molecular orbitals in a substantial binding energy range, in the present case more than 10 eV. Making use of the angular distribution of photoelectrons as a function of binding energy, we exemplify this by extracting orbital-resolved partial densities of states (pDOS) for 15 $\pi$ and 23 $\sigma$ orbitals from the experimental photoemission intensities of the prototypical organic molecule bisanthene (C$_{28}$H$_{14}$) on a Cu(110) surface. In their entirety, these experimentally measured orbital-resolved pDOS for an essentially complete set of orbitals serve as a stringent benchmark for electronic structure methods, which we illustrate by performing density functional theory (DFT) calculations employing four frequently-used exchange-correlation functionals. By computing the respective molecular-orbital-projected densities of states of the bisanthene/Cu(110) interface, a one-to-one comparison with experimental data for an unprecedented number of 38 orbital energies becomes possible. The quantitative analysis of our data reveals that the range-separated hybrid functional HSE performs best for the investigated organic/metal interface. At a more fundamental level, the remarkable agreement between the experimental and the Kohn-Sham orbital energies over a binding energy range larger than 10\,eV suggests that -- perhaps unexpectedly -- Kohn-Sham orbitals approximate Dyson orbitals, which would rigorously account for the electron extraction process in photoemission spectroscopy but are notoriously difficult to compute, in a much better way than previously thought., Comment: arXiv admin note: text overlap with arXiv:2209.11516

Designing a dental crown is a time-consuming and labor intensive process. Our goal is to simplify crown design and minimize the tediousness of making manual adjustments while still ensuring the highest level of accuracy and consistency. To this end, we present a new end- to-end deep learning approach, coined Dental Mesh Completion (DMC), to generate a crown mesh conditioned on a point cloud context. The dental context includes the tooth prepared to receive a crown and its surroundings, namely the two adjacent teeth and the three closest teeth in the opposing jaw. We formulate crown generation in terms of completing this point cloud context. A feature extractor first converts the input point cloud into a set of feature vectors that represent local regions in the point cloud. The set of feature vectors is then fed into a transformer to predict a new set of feature vectors for the missing region (crown). Subsequently, a point reconstruction head, followed by a multi-layer perceptron, is used to predict a dense set of points with normals. Finally, a differentiable point-to-mesh layer serves to reconstruct the crown surface mesh. We compare our DMC method to a graph-based convolutional neural network which learns to deform a crown mesh from a generic crown shape to the target geometry. Extensive experiments on our dataset demonstrate the effectiveness of our method, which attains an average of 0.062 Chamfer Distance.The code is available at:https://github.com/Golriz-code/DMC.gi

Quantum error correction is needed for quantum computers to be capable of fault-tolerantly executing algorithms using hundreds of logical qubits. Recent experiments have demonstrated subthreshold error rates for state preservation of a single logical qubit. In addition, the realization of universal quantum computation requires the implementation of logical entangling gates. Lattice surgery offers a practical approach for implementing such gates, particularly in planar quantum processor layouts. In this work, we demonstrate lattice surgery between two distance-three repetition-code qubits by splitting a single distance-three surface-code qubit. Using a quantum circuit fault-tolerant to bit-flip errors, we achieve an improvement in the value of the decoded $ZZ$ logical two-qubit observable compared to a similar non-encoded circuit. By preparing the surface-code qubit in initial states parametrized by a varying polar angle, we evaluate the performance of the lattice surgery operation for non-cardinal states on the logical Bloch sphere and employ logical two-qubit tomography to reconstruct the Pauli transfer matrix of the operation. In this way, we demonstrate the functional building blocks needed for lattice surgery operations on larger-distance codes based on superconducting circuits., Comment: 19 pages, 13 figures

Despite being the most common types of stars in the Galaxy, the physical properties of late M dwarfs are often poorly constrained. A trend of radius inflation compared to evolutionary models has been observed for earlier type M dwarfs in eclipsing binaries, possibly caused by magnetic activity. It is currently unclear whether this trend also extends to later type M dwarfs below the convective boundary. This makes the discovery of lower-mass, fully convective, M dwarfs in eclipsing binaries valuable for testing evolutionary models especially in longer-period binaries where tidal interaction between the primary and secondary is negligible. With this context, we present the discovery of the NGTS-EB-7 AB system, an eclipsing binary containing a late M dwarf secondary and an evolved G-type primary star. The secondary star has a radius of $0.125 \pm 0.006 R_\odot$ , a mass of $0.096 \pm 0.004 M_\odot$ and follows a highly eccentric $(e=0.71436 \pm 0.00085)$ orbit every $193.35875 \pm 0.00034$ days. This makes NGTS-EB-7 AB the third longest-period eclipsing binary system with a secondary smaller than $200 M_J$ with the mass and radius constrained to better than $5 \%$. In addition, NGTS-EB-7 is situated near the centre of the proposed LOPS2 southern field of the upcoming PLATO mission, allowing for detection of the secondary eclipse and measurement of the companion`s temperature. With its long-period and well-constrained physical properties - NGTS-EB-7 B will make a valuable addition to the sample of M dwarfs in eclipsing binaries and help in determining accurate empirical mass/radius relations for later M dwarf stars., Comment: Main body: 14 pages, 6 figures, 5 tables. Appendices: 7 pages, 5 figures, 5 tables

The BabyLM challenge called on participants to develop sample-efficient language models. Submissions were pretrained on a fixed English corpus, limited to the amount of words children are exposed to in development (<100m). The challenge produced new architectures for data-efficient language modelling, which outperformed models trained on trillions of words. This is promising for low-resource languages, where available corpora are limited to much less than 100m words. In this paper, we explore the potential of BabyLMs for low-resource languages, using the isiXhosa language as a case study. We pretrain two BabyLM architectures, ELC-BERT and MLSM, on an isiXhosa corpus. They outperform a vanilla pretrained model on POS tagging and NER, achieving notable gains (+3.2 F1) for the latter. In some instances, the BabyLMs even outperform XLM-R. Our findings show that data-efficient models are viable for low-resource languages, but highlight the continued importance, and lack of, high-quality pretraining data. Finally, we visually analyse how BabyLM architectures encode isiXhosa.

Human emotions entail a complex set of behavioral, physiological and cognitive changes. Current state-of-the-art models fuse the behavioral and physiological components using classic machine learning, rather than recent deep learning techniques. We propose to fill this gap, designing the Multimodal for Video and Physio (MVP) architecture, streamlined to fuse video and physiological signals. Differently then others approaches, MVP exploits the benefits of attention to enable the use of long input sequences (1-2 minutes). We have studied video and physiological backbones for inputting long sequences and evaluated our method with respect to the state-of-the-art. Our results show that MVP outperforms former methods for emotion recognition based on facial videos, EDA, and ECG/PPG., Comment: Preprint. Final paper accepted at Affective Behavior Analysis in-the-Wild (ABAW) at IEEE/CVF European Conference on Computer Vision (ECCV), Milan, September, 2024. 17 pages

We introduce a new scheme for solving the non-regularized Porous Medium Equation. It is mass conserving and uses only positive unknown values. To address these typically conflicting features, we employ the eXtreme Mesh deformation approach (X-Mesh), specifically designed for problems involving sharp interfaces. The method ensures that the interface is always meshed, even in the face of complex topological changes, without the need for remeshing or altering the mesh topology. We illustrate the effectiveness of the approach through various numerical experiments.

This paper proposes an extension of standard mixture stochastic models, by replacing the constant mixture weights with functional weights defined using a classifier. Classifier Weighted Mixtures enable straightforward density evaluation, explicit sampling, and enhanced expressivity in variational estimation problems, without increasing the number of components nor the complexity of the mixture components.

Free surface and granular fluid mechanics problems combine the challenges of fluid dynamics with aspects of granular behaviour. This type of problem is particularly relevant in contexts such as the flow of sediments in rivers, the movement of granular soils in reservoirs, or the interactions between a fluid and granular materials in industrial processes such as silos. The numerical simulation of these phenomena is challenging because the solution depends not only on the multiple phases that strongly interact with each other, but also on the need to describe the geometric evolution of the different interfaces. This paper presents an approach to the simulation of fluid-granular phenomena involving strongly deforming free surfaces. The Discrete Element Method (DEM) is combined with the Particle Finite Element Method (PFEM) and the fluid-grain interface is treated by a two-way coupling between the two phases. The fluid-air interface is solved by a free surface model. The geometric and topological variations are therefore naturally provided by the full Lagrangian description of all phases. The approach is validated on benchmark test cases such as two-phase dam failures and then applied to a real landslide problem.

Challenges in cross-learning involve inhomogeneous or even inadequate amount of training data and lack of resources for retraining large pretrained models. Inspired by transfer learning techniques in NLP, adapters and prefix tuning, this paper presents a new model-agnostic plugin architecture for cross-learning, called CM3T, that adapts transformer-based models to new or missing information. We introduce two adapter blocks: multi-head vision adapters for transfer learning and cross-attention adapters for multimodal learning. Training becomes substantially efficient as the backbone and other plugins do not need to be finetuned along with these additions. Comparative and ablation studies on three datasets Epic-Kitchens-100, MPIIGroupInteraction and UDIVA v0.5 show efficacy of this framework on different recording settings and tasks. With only 12.8% trainable parameters compared to the backbone to process video input and only 22.3% trainable parameters for two additional modalities, we achieve comparable and even better results than the state-of-the-art. CM3T has no specific requirements for training or pretraining and is a step towards bridging the gap between a general model and specific practical applications of video classification., Comment: Preprint. Final paper accepted at the IEEE/CVF Winter Conference on Applications of Computer Vision (WACV), Tucson, February, 2025. 10 pages

Rigorous external validation is crucial for assessing the generalizability of prediction models, particularly by evaluating their discrimination (AUROC) on new data. This often involves comparing a new model's AUROC to that of an established reference model. However, many studies rely on arbitrary rules of thumb for sample size calculations, often resulting in underpowered analyses and unreliable conclusions. This paper reviews crucial concepts for accurate sample size determination in AUROC-based external validation studies, making the theory and practice more accessible to researchers and clinicians. We introduce powerROC, an open-source web tool designed to simplify these calculations, enabling both the evaluation of a single model and the comparison of two models. The tool offers guidance on selecting target precision levels and employs flexible approaches, leveraging either pilot data or user-defined probability distributions. We illustrate powerROC's utility through a case study on hospital mortality prediction using the MIMIC database.

The objective of this work is to study the existence, uniqueness, and stability of equilibria in mean field games involving a major player and a continuum of minor players over finite intervals of arbitrary length. Following earlier articles addressing similar questions in the context of classical mean field games, the cost functions for the minor players are assumed to satisfy the Lasry-Lions monotonicity condition. In this contribution, we demonstrate that if, in addition to the monotonicity condition, the intensity of the (Brownian) noise driving the major player is sufficiently high, then -- under further mild regularity assumptions on the coefficients -- existence, uniqueness, and stability of equilibria are guaranteed. A key challenge is to show that the threshold (beyond which the noise intensity must be taken) can be chosen independently of the length of the time interval over which the game is defined. Building on the stability properties thus established, we further show that the associated system of master equations admits a unique classical solution. To the best of our knowledge, this is the first result of its kind for major-minor mean field games defined over intervals of arbitrary length.

Instructional cataract surgery videos are crucial for ophthalmologists and trainees to observe surgical details repeatedly. This paper presents a deep learning model for real-time identification of surgical instruments in these videos, using a custom dataset scraped from open-access sources. Inspired by the architecture of YOLOV9, the model employs a Programmable Gradient Information (PGI) mechanism and a novel Generally-Optimized Efficient Layer Aggregation Network (Go-ELAN) to address the information bottleneck problem, enhancing Minimum Average Precision (mAP) at higher Non-Maximum Suppression Intersection over Union (NMS IoU) scores. The Go-ELAN YOLOV9 model, evaluated against YOLO v5, v7, v8, v9 vanilla, Laptool and DETR, achieves a superior mAP of 73.74 at IoU 0.5 on a dataset of 615 images with 10 instrument classes, demonstrating the effectiveness of the proposed model., Comment: Preprint. Full paper accepted at the IEEE International Conference on Image Processing Applications and Systems (IPAS), Lyon, France, Jan 2025. 6 pages

We present a bundle geometric formulation of non-relativistic many-particles Quantum Mechanics. A wave function is seen to be a $\mathbb{C}$-valued cocyclic tensorial 0-form on configuration space-time seen as a principal bundle, while the Schr\"odinger equation flows from its covariant derivative, with the action functional supplying a (flat) cocyclic connection 1-form on the configuration bundle. In line with the historical motivations of Dirac and Feynman, ours is thus a Lagrangian geometric formulation of QM, in which the Dirac-Feynman path integral arises in a geometrically natural way. Applying the dressing field method, we obtain a relational reformulation of this geometric non-relativistic QM: a relational wave function is realised as a basic cocyclic 0-form on the configuration bundle. In this relational QM, any particle position can be used as a dressing field, i.e. as a "physical reference frame". The dressing field method naturally accounts for the freedom in choosing the dressing field, which is readily understood as a covariance of the relational formulation under changes of physical reference frame., Comment: 34 pages, 2 figures

Inspired by a paper by T. Chakradhar, K. Gittins, G. Habib and N. Peyerimhoff, we analyze their conjecture that the ground state energy of the magnetic Dirichlet-to-Neumann operator tends to infinity as the magnetic field tends to infinity. More precisely, we prove refined conjectures for general two dimensional domains, based on the analysis in the case of the half-plane and the disk by two of us (B.H. and F.N.). We also extend our analysis to the three dimensional case, and explore a connection with the eigenvalue asymptotics of the magnetic Robin Laplacian., Comment: 38 pages

A significant part of the Milky Way (MW) dwarf galaxies orbit within a Vast POlar Structure (VPOS) that is perpendicular to the Galactic disk, whose origin has not yet been identified. It includes the Large Magellanic Cloud (LMC) and its six dynamically associated dwarf galaxies. Andromeda Galaxy (M31) experienced a major merger two to three billion years ago, and its accurate modelling predicts that an associated tidal tail is pointing toward the Galaxy. Here, we have tested a possible association between M31 tidal tail particles and MW dwarf galaxies, focusing first on the LMC and its associated dwarfs since they are less affected by ram pressure. We traced back these dwarf galaxy orbits by one billion years and calculated their association to the tidal tail particles in the 6D phase space, based on their proper motion from Gaia DR3. We find that for low-mass MW models (total mass smaller than 5 $\times 10^{11} M_{\odot}$), the separation in the 6D space can be less than 1$\sigma$ for most of the M31 modelling, while an important degree of freedom is provided by the still unknown proper motion of M31. We further discover that many other dwarfs could also be associated with the M31 tidal tails if their motions had been radially slowed down, as expected from the ram pressure exerted by the MW corona. This intriguing coincidence could explain the origin of the VPOS, which came from a matter exchange between M31 and MW., Comment: A&A, accepted 20th December 2024, 10 pages, 9 figures, and Appendix A, B, C, D & E