Search

The development of eco-friendly, cost-effective, and naturally abundant electrode materials for supercapacitors is gaining critical importance in current energy storage research. This study focuses on the synthesis of tin sulfide (SnSx) films via the eco-friendly successive ionic layer adsorption and reaction (SILAR) method, employing varying quantities of L-ascorbic acid (0.8 and 1.0 g) as a reducing agent. Tin sulfide films were deposited on fluorine-doped tin oxide (FTO) glass substrates and subsequently annealed in an inert atmosphere at temperatures ranging from 200 to 400 °C, resulting in thin films of varying thicknesses (100–420 nm). The structural and compositional characteristics of the films were thoroughly analyzed using Raman spectroscopy to confirm the purity and spectroscopic signatures of the sulfides. Further characterization was performed to assess the films' morphology (scanning electron microscopy, SEM), phase composition (X-ray diffraction, XRD), surface chemical states (X-ray photoelectron spectroscopy, XPS), optical properties (UV–Vis spectroscopy), and electrical properties (Hall measurements). The gathered data were then used to evaluate the potential of tin sulfide films as electrode materials in supercapacitors, highlighting their suitability for sustainable energy storage applications. [ABSTRACT FROM AUTHOR]

A unique compound (compound 1) with structural features including an unprecedented tridentate-bridging coordination mode of permanganate ions and an eight-coordinated (rhombohedral) κ1-chlorido and tridentate permanganato ligand in a potassium complex containing coordination polymer (CoIII(NH3)6]n[(K(κ1-Cl)2(μ2,2′,2″-(κ3-O,O′,O″-MnO4)2)n∞) with isolated regular octahedral hexamminecobalt(III) cation was synthesized with a yield of >90%. The structure was found to be stabilized by mono and bifurcated N-H∙∙∙Cl and N-H∙∙∙O (bridging and non-bridging) hydrogen bonds. Detailed spectroscopic (IR, far-IR, and Raman) studies and correlation analysis were performed to assign all vibrational modes. The existence of a resonance Raman effect of compound 1 was also observed. The thermal decomposition products at 500 °C were found to be tetragonal nano-CoMn2O4 spinel with 19–25 nm crystallite size and KCl. The decomposition intermediates formed in toluene at 110 °C showed the presence of a potassium- and chloride-containing intermediates combined into KCl during aqueous leaching, together with the formation of cobalt(II) nitrate hexahydrate. This means that the CoIII–CoII redox reaction and the complete decomposition of the permanganate ions occurred in the first decomposition step, with a partial oxidation of ammonia into nitrate ions. [ABSTRACT FROM AUTHOR]

[Carbonatotetraamminecobalt(III)] permanganate monohydrate was synthesized first in the metathesis reaction of [Co(NH3)4CO3]NO3 and NaMnO4 in aqueous solution. Its thermal dehydration at 100 °C resulted in phase-pure [Co(NH3)4CO3]MnO4 (compound 1). Compounds 1 and 2 (i.e., the hydrated form) were studied with IR, far-IR, and low-temperature Raman spectroscopies, and their vibrational modes were assigned. The lattice parameters were determined by powder X-ray diffraction (PXRD) and single crystal X-ray diffraction (SXRD) methods for the triclinic and orthorhombic compounds 1 and 2, respectively. The detailed structure of compound 2 was determined, and the role of hydrogen bonds in the structural motifs was clarified. UV studies on compounds 1 and 2 showed the distortion of the octahedral geometry of the complex cation during dehydration because of the partial loss of the hydrogen bonds between the crystal water and the ligands of the complex cation. The thermal decomposition consists of a solid phase quasi-intramolecular redox reaction between the ammonia ligands and permanganate anions with the formation of ammonia oxidation products (H2O, NO, N2O, and CO2). The solid phase reaction product is amorphous cobalt manganese oxide containing ammonium, carbonate (and nitrate) anions. The temperature-controlled thermal decomposition of compound 2 in toluene at 110 °C showed that one of the decomposition intermediates is ammonium nitrate. The decomposition intermediates are transformed into Co1.5Mn1.5O4 spinel with MnCo2O4 structure upon further heating. Solid compound 2 gave the spinel at 500 °C both in an inert and air atmosphere, whereas the sample pre-treated in toluene at 110 °C without and with the removal of ammonium nitrate by aqueous washing, gave the spinel already at 300 and 400 °C, respectively. The molten NH4NO3 is a medium to start spinel crystallization, but its decomposition stops further crystal growth of the spinel phase. By this procedure, the particle size of the spinel product as low as ~4.0 nm could be achieved for the treatments at 300 and 400 °C, and it increased only to 5.7 nm at 500 °C. The nano-sized mixed cobalt manganese oxides are potential candidates as Fischer-Tropsch catalysts. [ABSTRACT FROM AUTHOR]

Sustainable battery concepts are of great importance for the energy storage demands of the future. Organic batteries based on redox‐active polymers are one class of promising storage systems to meet these demands, in particular when combined with environmentally friendly and safe electrolytes. Deep Eutectic Solvents (DESs) represent a class of electrolytes that can be produced from sustainable sources and exhibit in most cases no or only a small environmental impact. Because of their non‐flammability, DESs are safe, while providing an electrochemical stability window almost comparable to established battery electrolytes and much broader than typical aqueous electrolytes. Here, we report the first all‐organic battery cell based on a DES electrolyte, which in this case is composed of sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) and N‐methylacetamide (NMA) alongside the electrode active materials poly(2,2,6,6‐tetramethylpiperidin‐1‐yl‐oxyl methacrylate) (PTMA) and crosslinked poly(vinylbenzylviologen) (X‐PVBV2+). The resulting cell shows two voltage plateaus at 1.07 V and 1.58 V and achieves Coulombic efficiencies of 98 %. Surprisingly, the X‐PVBV/X‐PVBV+ redox couple turned out to be much more stable in NaTFSI : NMA 1 : 6 than the X‐PVBV+/X‐PVBV2+ couple, leading to asymmetric capacity fading during cycling tests. [ABSTRACT FROM AUTHOR]