Search

In fabric-cement composites, the limited impregnation of cementitious matrix products due to thick and twisted yarns leads to premature failure due to poor bonding strength. In addition, cellulosic textile reinforcements have many challenges about durability, appearance of voids at mortar-fiber interface, and rise of microcracks. Textile performances were evaluated in different conditions: coated with micro-silica powder, pretreated, and without any treatment. This study also assessed how textile weave structure and yarn geometry configuration affect the interactions of two different jute textiles (Close Weave Jute Fabric – CJF and Open Weave Jute Fabric - OJT) when used as reinforcement in mortar matrix. Textile characterization and composite analysis (by four-point bending tests, SEM/EDS, and physical tests) were conducted to assess the different textile reinforcements, the mechanical behavior of produced composites, and visual and chemical compounds analysis of the interfacial transition zone between textile and mortar matrix after silica coating. Micro silica powder coating was deemed necessary to address limited impregnation and to avoid telescope pull-off. Weave structure determined the difference between jute fabrics to reinforce mortar matrix, being only OJF (larger interstices in the weave structure) with micro silica coating allowed a better matrix interaction and stood out from the other textiles and achieved the best specific energy of all samples, (4.28 ± 0.91) kJ.m-2. Calcium and silicon inside the yarn interstices and textile-matrix interface indicate the formation of strong bonds by calcium-silicate-hydrate products. The silica coating treatment enhanced formation of strong bonds, which demonstrated future promise for natural fiber application. [ABSTRACT FROM AUTHOR]

Electroluminescence (EL) is an innovative technology in the lighting area. EL devices' main structure consists of a phosphor layer sandwiched between two electrodes. In this work, several alternating-current EL devices were developed by applying a set of sequential layers with combinations of in-house prepared inks and a commercially available ink as the phosphor layer. A flexible polyester textile substrate was functionalized with the inks by spray coating, after knife coating an interfacial layer directly on the surface. A thorough study was carried out on the phosphor layer composition to optimize the EL device performance, more precisely, illuminance intensity and illuminance homogeneity. The developed phosphor layer was composed of zinc sulfide doped with copper (between 30.0 and 38.1 wt%) and diluted by using a diluent at different concentrations (from 28.0 to 35.5 wt%). The best peak illuminance intensity of 61 lux was obtained when the phosphor ink presented a 35.4% ZnS:Cu ratio and was diluted with 33.0% diluent. This study aimed to determine the best formulation of the phosphor layer, which can be highly useful for further developments of EL devices, taking into account different applications in the market. [ABSTRACT FROM AUTHOR]

Numerous elements, such as the composition and characteristics of carbon nanomaterials, the composition and characteristics of the matrix material, moisture levels, temperature, and loading circumstances, influence the piezoresistive behavior of self-sensing cementitious composites. While some past research has explored the impact of some of these factors on the performance of self-sensing cementitious composites, additional investigations need to be conducted to delve into how loading conditions affect the sensitivity of self-sensing cement-stabilized composites. Therefore, this study explores the influences of various loading conditions (i.e., location of loading regarding the location of recording electrodes, and loading level) on the electromechanical performance of self-sensing cement-stabilized sand. To this end, firstly, the evaluation of the percolation threshold based on 10% cement-stabilized sand specimens containing various multiwall carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) was performed. Then, 10% cement-stabilized sand containing 4% MWCNTs/GNPs was tested under various cyclic compressive stresses. The results suggested that the distance between the loading area and the electrode location used for recording the electrical resistance significantly impacted the sensitivity of cement-stabilized sand. Optimal sensitivity was achieved when the electrodes were positioned directly beneath the loading area. Moreover, the study showed that the stress sensitivity of self-sensing cement-stabilized sand increased proportionally with the stress level. An examination through scanning electron microscopy (SEM) demonstrated that the loading condition influences the bridging characteristics of carbon nanomaterials in cement-stabilized sand, leading to diverse electromechanical behaviors emerging based on the loading condition. This study underscores the importance of considering specific parameters when designing self-sensing cement-stabilized sand for application in practical field use. [ABSTRACT FROM AUTHOR]

As an emerging technology, smart textiles can bring solutions to many problems, but also create new ones, especially related to their disposal and their impact on the environment. That is why it is important to address this problem at this stage of technological development when smart textiles have not yet pervaded the mass markets. In this article, first, an attempt is made to understand the chronological development of smart textiles: the reasons for a weak breakthrough in the commercial markets throughout the decades, starting from the 1990s until today, but also the emergence of new driving forces that should inevitably lead to a bright future for smart textiles. In addition, we explore the contemporary possibilities for sustainable materials, manufacturing techniques, and end-of-life solutions for developing sustainable smart textiles based on a broad literature review, online sources, and a questionnaire survey among textile experts. Finally, an overview of the latest developments related to the standardization of smart textiles is given. This research was spurred by participation in CONTEXT COST Action (CA17107 - European Network to connect research and innovation efforts on advanced Smart Textiles). [ABSTRACT FROM AUTHOR]