Search

AbstractVacuum pumps are the heart of the fusion fuel cycle, but most currently proposed pumping technologies are not capable of handling the required flow rates and vacuum pressures. Oil-containing vacuum pumps can readily meet the flow requirements, but vacuum fluids will degrade in fusion-relevant environments due to contact with tritium and exposure to high-energy radiation. Here, we describe a methodology to screen vacuum fluid candidates and purify these candidate fluids post oxidation, post exposure to deuterium, and post exposure to gamma radiation (<7.5 MGy) to simulate a process in which vacuum fluids can be recovered and regenerated during the fusion fuel cycle. A series of oils, including a highly purified mineral oil, phenyl silicone oil, and a polyphenyl ether, are shown to be suitable candidates for vacuum pumping. Additionally, we describe a simple purification methodology to remove oxidized functionalities and the associated isotopologues induced by contact with deuterium from the candidate vacuum fluids This purification methodology can also be applied to radiological damage with moderate effect. Finally, we demonstrate that the sorbents can be regenerated through electromagnetic microwave digestion.

This contribution describes a rapid, fieldable alpha spectroscopy sample preparation technique that minimizes consumables and decreases the nuclear forensics timeline. Functional ultrafiltration membranes are presented that selectively concentrate uranium directly from pH 6 groundwater and serve as the alpha spectroscopy substrate. Membranes were prepared by ultraviolet grafting of uranium-selective polymer chains from the membrane surface. Membranes were characterized by Fourier-transform infrared spectroscopy before and after modification to support functionalization. Membrane performance was evaluated using uranium-233 or depleted uranium in both deionized and simulated groundwater at pH 6. Functionalized membranes achieved peak energy resolutions of 31 ± 2 keV and recoveries of 81 ± 4% when prepared directly from pH 6 simulated groundwater. For simulated groundwater spiked with depleted uranium, baseline energy resolution was achieved for both isotopes (uranium-238 and uranium-234). The porous, uranium-selective substrate designs can process liters per hour of uranium-contaminated groundwater using low-pressure (<150 kPa) filtration and a 45 mm diameter membrane filter, leading to a high-throughput, one-step concentration, purification, and sample mounting process.