Search

Large-mode-area anti-resonant fibers (LMA ARF) with high beam quality have the potential to revolutionize mid-infrared high-power laser delivery by mitigating mode instabilities and nonlinear degradation. However, their tens-of-microns mode field diameters and small numerical aperture significantly increase the mode field mismatch and coupling complexity, respectively. In this work, an LMA all-solid anti-resonant fiber-microlens with a robust operation of high beam quality in the mid-infrared region was designed and prepared. It can significantly stabilize the efficiencies of coupling and transmission at a large radial offset. Consequently, this AS-ARF demonstrates substantial potential for advancing mid-infrared laser power delivery via fiber, ensuring exceptional beam quality throughout the process. [ABSTRACT FROM AUTHOR]

Erbium-doped glass microsphere laser systems hold significant promise in the applications of bio-medicine and optical fiber sensing. However, their development has been hindered by the relatively high laser pump threshold. In this study, we proposed a unique dual microsphere system where two microspheres are affixed to a single-mode fiber taper and achieved a remarkably low lasing threshold of 19 μW for single-mode laser emission at 1544 nm. This is in sharp contrast with the lasing threshold of 56 μW observed in single microspheres. Our findings represent a significant achievement in the development of low-threshold, compact infrared laser sources for emerging applications in photonics. [ABSTRACT FROM AUTHOR]

In order to address the 'capacity crisis' caused by the narrow bandwidth of the current C band and the demand for wide-spectrum sensing sources and tunable fiber lasers, a broadband luminescence covering the C + L bands using Er3+/Yb3+ co-doped fluorotellurite glass fiber is investigated in this paper. The optimal doping concentrations in the glass host were determined based on the intensity, lifetime, and full width at half maximum (FWHM) of the fluorescence centered at 1.5 µm, which were found to be 1.5 mol% Er2O3 and 3 mol% Yb2O3. We also systematically investigated this in terms of optical absorption spectra, absorption and emission cross-sections, gain coefficients, Judd–Ofelt parameters, and up-conversion fluorescence. The energy transfer (ET) mechanism between the high concentrations of Er3+ and Yb3+ was summarized. In addition, a step-indexed fiber was prepared based on these fluorotellurite glasses, and a wide bandwidth of ~112.5 nm (covering the C + L bands from 1505.1 to 1617.6 nm) at 3 dB for the amplified spontaneous emission (ASE) spectra has been observed at a fiber length of 0.57 m, which is the widest bandwidth among all the reports based on tellurite glass. Therefore, this kind of Er3+/Yb3+ co-doped fluorotellurite glass fiber has great potential for developing broadband C + L band amplifiers, ultra-wide fiber sources for sensing, and tunable fiber lasers. [ABSTRACT FROM AUTHOR]

A polarization-insensitive multimode silicon waveguide crossing is investigated and experimentally characterized in this Letter. By employing the particle swarm optimization (PSO) algorithm and finite difference time domain (FDTD) method, the lengths and widths of the waveguides in the proposed device are optimized for attaining wide bandwidth, small insertion loss (IL), low cross talk (CT), and compact size. Measurement results reveal that the footprint of the presented device is 11.92 μm × 11.92 μm. From 1520 to 1600 nm, the measured insertion loss and cross talk are smaller than 0.67 dB and -28.6 dB in the case of the TE 0 mode, lower than 0.65 dB and -28.7 dB in the case of the TE 1 mode, less than 0.48 dB and -36.3 dB in the case of the TM 0 mode, and lower than 0.62 dB and -28 dB in the case of the TM 1 mode.

Chalcogenide glass has achieved great success in manufacturing axial-type infrared gradient refractive index (IR-GRIN) lenses. However, studies on radial-type IR-GRIN lenses, which are more ideal for optical design, remain rare. The present study introduces what we believe to be a new method for preparing radial IR-GRIN lens by creating high refractive index ( n ) In 2 S 3 nanocrystals within a 65GeS 2 -25In 2 S 3 -10CsCl (GIC, in molar percentage) glass matrix. Upon introduction of multi-temperature field manipulation, we have successfully achieved central crystallization and simultaneous gradient attenuation spreading toward the edge within GIC glass, providing a radial GRIN profile with Δ n over 0.1 while maintaining excellent IR transparency. In addition, the optical and structural properties of the GIC GRIN samples were characterized. The relationship between Raman intensity and the n of glass ceramics at different heat treatment temperatures was investigated, thereby enabling the indirect confirmation of the presence of radial gradient crystallization within the prepared GIC GRIN samples through Raman intensity. Multiple experimental results have shown that this approach has excellent reproducibility and potential for large-scale productions.

A high-efficiency and broadband tunable chalcogenide fiber Raman laser with the Fabry-Perot (F-P) cavity formed by the Fresnel reflection was established. A maximum average power slope efficiency of around 43 % and a maximum output peak power of about 2.9 W at 2148 nm were demonstrated by using a 2 µm nanosecond pump source. The laser shows a broadened pulse width of 674 ns and a broadband tunability of the central wavelength from 2100 to 2186 nm. The Raman Fabry-Perot cavity constituted by the Fresnel reflection from chalcogenide fiber endfaces can operate at any wavelength without the aid of any additional optical feedback element. This will facilitate the realization of fiber lasers with excellent performance and compact system, especially in the mid-infrared region.

Fiber side-pump couplers can enhance the output power of fiber laser due to their dependable and efficient operation and impressive power handling capability. We developed a tellurite fiber side-pump coupler by twisting and fusing a tapered pump fiber onto a target fiber. The effect of twisting parameters on coupling efficiency was comprehensively investigated through theoretical simulations and experiments. Experimental results exhibited an impressive coupling efficiency of 76.5% and a root mean square stability of 0.086% and 0.091% before and after one month, respectively, driven by an incident pump power of up to 4.2 W.

A polarization beam-splitting multimode filter using pixelated waveguides has been presented and experimentally demonstrated in this paper. Finite difference time domain method and direct binary search optimization algorithm are employed to optimize pixelated waveguides to realize compact size, broad bandwidth, large extinction ratio, low insertion loss, and good polarization extinction ratio. Measurement results show that, in a wavelength range from 1520 to 1560 nm, for the fabricated device working at transverse-electric polarization, the measured insertion loss is less than 1.23 dB and extinction ratio is larger than 15.14 dB, while for transverse-magnetic polarization, the corresponding insertion loss lower than 0.74 dB and extinction ratio greater than 15.50 dB are realized. The measured polarization extinction ratio larger than 15.02 dB is achieved. The device's length is only 15.4 µm.