Search

This article proposes a methodology for designing co-polarized in-band full-duplex (IBFD) antenna arrays with high isolation. An equivalent circuit model of IBFD antenna arrays is established, and transmission zeros are introduced by configuring controllable coupling paths between the arrays. Based on the proposed equivalent circuit model, the high-isolation co-polarized IBFD antenna arrays are designed by utilizing a wavefront phase compensation technique and a controllable coupling structure. Two co-polarized IBFD cavity slot antenna arrays based on the TM510 mode cavity are designed for validation, where a transmission zero is obtained in the passband to improve the isolation between the transmitter (Tx) and the receiver (Rx) ports. Compared with the reference antenna array, the isolation of the designed IBFD antenna array is improved by about 22 dB. The theoretical analysis and design process of the IBFD antenna array is given in detail. A second-order co-polarized IBFD antenna array is fabricated and measured, and the measured results are in good agreement with the simulated results.

A novel multiple-input–multiple-output (MIMO) slot antenna with dual-band self-decoupling characteristics is proposed. The operating principle of the proposed method is to obtain the proper equivalent characteristic impedance and proper equivalent electrical length by adjusting the width of the shared radiators. The radiators of the initial antenna consist of only two nested square ring slots, and they are widened by multiple structures to form the nonuniform radiators in the proposed antenna. It can be coupled fed by four microstrip lines, respectively, creating the dual collinear polarization. The initial antenna operates at 1.3–1.6 GHz in the low band (LB) while at 3.6–3.83 GHz in the high band (HB). The isolation ranges from 7–10 dB in LB and 10–14 dB in HB. The proposed antenna ranges from 1.20 to 1.88 GHz and from 3.52 to 3.90 GHz, and the isolations are improved to over 30 dB in LB and over 65 dB in HB, respectively. The nonuniform slot radiators have both decoupling and matching functions without additional components. The proposed antenna has the advantages of wideband, compact and high isolation.

A dual-band coradiator antenna with a beam-scanning capability for the sub-6 GHz and millimeter-wave (mm-wave) bands is proposed in this article. First, four subarrays based on cascaded triangular cavities are arranged using a mirror operation to form the mm-wave antenna array. Then, four mm-wave subarrays are connected at the position where the electric field is at a minimum on their edges. Finally, the entire mm-wave array structure resonates in the microwave band, which can be equivalent to a shorted quarter-wavelength patch antenna in the sub-6 GHz band. Hence, the same radiator can work as both a sub-6 GHz antenna and an mm-wave antenna array with broadside patterns in both cases. Attributed to the novel co-radiator structure, the proposed design is simple and compact. An interdigital coupled line with a high-pass filtering characteristic is inserted into each mm-wave feeding line to enhance the isolation. Besides, two parasitic patches are loaded to increase the microwave bandwidth. The experimental results show that the peak gain at 2.56 GHz is 3.2 dBi and at 28 GHz is 14.3 dBi for the sub-6 GHz and mm-wave bands, respectively. The isolation among different feeding ports is greater than 15 dB and the mm-wave array also provides ±38° beam-scanning performance.

This letter proposes a novel, simple method for suppressing common-mode current interference in dual-band dual-polarized base station antenna arrays. By loading a lumped capacitance and inductance (LC) circuit between the outer conductor of the coaxial feeder of the high-band (HB) element and the ground, the common-mode current on the HB element can be entirely suppressed when the low-band (LB) element is excited. The operation mechanism of suppressing common-mode current is analyzed. The proposed method is validated using an array covering 2G/3G/4G communication systems that consist of one LB element operating at 0.69–0.96 GHz and two columns of HB elements operating at 1.7–2.7 GHz. The simulation and measurement results show that this method effectively suppresses the common-mode current on the HB elements while restoring the radiation characteristic of the LB element in broadband.

A novel quad-port shared-radiator slot antenna with broadband decoupling characteristics is proposed. The proposed slot antenna (PSA) has multiple electrical-current nulls for decoupling, formed by the cancellation of contrary characteristic modes (CMs) currents. The reduction of broadband mutual coupling can be achieved by changing the slot width at the four edges and corners of the original slot antenna (OSA). The −10 dB operating bandwidth is expanded from 28.6% on OSA to 69.7% on PSA. The isolations are only 7–9 dB on OSA but improved to better than 17 dB on PSA, even reaching a maximum of 25 dB. The total efficiency of PSA has a significant improvement compared to the OSA, and the envelope correlation coefficients of PSA are close to zero, far below the OSA. The good coincidence between the simulated and measured results confirms the correctness of the proposed method.