Search

This study investigated the use of cellulose nanocrystals (CNC)/chitosan (Chit) polyelectrolyte complex as a stabilizing agent for Pickering emulsions. We demonstrated that chitosan reduces the surface charge of CNC improving the emulsification process. An optimal stabilizing complex containing 1% chitosan results in emulsions with minimal zeta potential (3.2 ± 0.3 mV), droplet size (2.8 ± 0.8 μm), and creaming index (19.8 ± 1.0%) values, along with high stability during storage, a change in pH, and high centrifugal forces (up to 2000 g). The study also showed that the maximum neutralized surface charge of the CNC in the CNC-Chit complex allows for effective adsorption on the surface of sunflower oil droplets, producing a denser stabilizing layer with a smaller droplet size. Additionally, chitosan addition is linked to improved stability and higher viscosity, with little dependence on ionic strength and temperature. Potentiometric titration revealed that compared with sulfated CNCs, five times less chitosan is needed to neutralize the negative surface charge of acetylated CNC. The wettability of a hydrophilic surface depends on the surface charge of the complex, and the wettability and adhesion performance increase with increasing chitosan content. Additionally, we showed that tuning the stabilizer composition can change the bioaccessibility of lipophilic compounds during oral administration. [ABSTRACT FROM AUTHOR]

Despite the mechanical and physical properties of polyurethane foams (PUF), their application is still hindered by high inflammability. The elaboration of effective, low-cost, and environmentally friendly fire retardants remains a pressing issue that must be addressed. This work aims to show the feasibility of the successful application of natural nanomaterials, such as halloysite nanotubes and nanocellulose, as promising additives to the commercial halogen-free, fire-retardant triphenyl phosphate (TPP) to enhance the flame retardance of open-cell polyurethane foams. The nanocomposite foams were synthesized by in situ polymerization. Investigation of the mechanical properties of the nanocomposite PUF revealed that the nanoscale additives led to a notable decrease in the foam's compressibility. The obtained results of the flammability tests clearly indicate that there is a prominent synergetic effect between the fire-retardant and the natural nanoscale additives. The nanocomposite foams containing a mixture of TPP (10 and 20 parts per hundred polyol by weight) and either 10 wt.% of nanocellulose or 20 wt.% of halloysite demonstrated the lowest burning rate without dripping and were rated as HB materials according to UL 94 classification. [ABSTRACT FROM AUTHOR]

Layered chalcogenides containing 3d transition metals are promising for the development of two-dimensional nanomaterials with interesting magnetic properties. Both mechanical and solution-based exfoliation of atomically thin layers is possible due to the low-energy van der Waals bonds. In this paper, we present the synthesis and crystal structures of the Mn2Ga2S5 and Mn2Al2Se5 layered chalcogenides. For Mn2Ga2S5, we report magnetic properties, as well as the exfoliation of nanofilms and nanoscrolls. The synthesis of both polycrystalline phases and single crystals is described, and their chemical stability in air is studied. Crystal structures are probed via powder X-ray diffraction and high-resolution transmission electron microscopy. The new compound Mn2Al2Se5 is isomorphous with Mn2Ga2S5 crystallizing in the Mg2Al2Se5 structure type. The crystal structure is built by the ABCBCA sequence of hexagonal close-packing layers of chalcogen atoms, where Mn2+ and Al3+/Ga3+ species preferentially occupy octahedral and tetrahedral voids, respectively. Mn2Ga2S5 exhibits an antiferromagnetic-like transition at 13 K accompanied by the ferromagnetic hysteresis of magnetization. Significant frustration of the magnetic system may yield spin-glass behavior at low temperatures. The exfoliation of Mn2Ga2S5 layers was performed in a non-polar solvent. Nanolayers and nanoscrolls were observed using high-resolution transmission electron microscopy. Fragments of micron-sized crystallites with a thickness of 70–100 nanometers were deposited on a glass surface, as evidenced by atomic force microscopy. [ABSTRACT FROM AUTHOR]

[Display omitted] A new method for the synthesis of nanosized ZSM-5 zeolite with the MFI structure in the proton form is reported. The material was synthesized by the hydrothermal-microwave method and characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, low-temperature nitrogen physisorption, thermal desorption of ammonia and solid- state 27Al NMR. The synthesized material is formed by zeolite particles of 30–80 nm in size, which ensures its high specific surface area, pore volume and interparticle porosity. [ABSTRACT FROM AUTHOR]