Search

The radial velocity catalog from the Apache Point Observatory Galactic Evolution Experiment (APOGEE) is unique in its simultaneously large volume and high precision as a result of its decade-long survey duration, multiplexing (600 fibers), and spectral resolution of $R \sim 22,500$. However, previous data reductions of APOGEE have not fully realized the potential radial velocity (RV) precision of the instrument. Here we present an RV catalog based on a new reduction of all 2.6 million visits of APOGEE DR17 and validate it against improved estimates for the theoretical RV performance. The core ideas of the new reduction are the simultaneous modeling of all components in the spectra, rather than a separate subtraction of point estimates for the sky, and a marginalization over stellar types, rather than a grid search for an optimum. We show that this catalog, when restricted to RVs measured with the same fiber, achieves noise-limited precision down to 30 m/s and delivers well-calibrated uncertainties. We also introduce a general method for calibrating fiber-to-fiber constant RV offsets and demonstrate its importance for high RV precision work in multi-fiber spectrographs. After calibration, we achieve 47 m/s RV precision on the combined catalog with RVs measured with different fibers. This degradation in precision relative to measurements with only a single fiber suggests that refining line spread function models should be a focus in SDSS-V to improve the fiber-unified RV catalog., Comment: 22 pages, 13 figures, SDSS-V Technical Paper, Submitted to AJ

Context. The explosive burning that drives nova eruptions results in unique nucleosynthesis that heavily over-produces certain isotopes relative to the solar abundance. However, novae are often ignored when considering the chemical evolution of our Galaxy due to their low ejecta masses. Aims. In this work, we use previously computed synthetic nova populations and the galactic chemical evolution code OMEGA+ to assess the impact that novae have on the evolution of stable elemental and isotopic abundances. Methods. We combine populations of novae computed using the binary population synthesis code binary_c with the galactic chemical evolution code OMEGA+ and detailed, white dwarf mass-dependent nova yields to model the nucleosynthetic contributions of novae to the evolution of the Milky Way. We consider three different nova yield profiles, each corresponding to a different set of nova yield calculations. Results. Despite novae from low-mass white dwarfs (WDs) dominating nova ejecta contributions, we find that novae occurring on massive WDs are still able to contribute significantly to many isotopes, particularly those with high mass numbers. We find that novae can produce up to 35% of the Galactic 13C and 15N mass by the time the model Galaxy reaches [Fe/H] = 0, and earlier in the evolution of the Galaxy (between [Fe/H] = -2 and -1) novae may have been the dominant source of 15N. Predictions for [13C/Fe], [15N/Fe], 12C/13C, and 14N/15N abundances ratios vary by up to 0.2 dex at [Fe/H] = 0 and by up to 0.7 dex in [15N/Fe] and 14N/15N between [Fe/H] = -2 and -1 (corresponding approximately to Galactic ages of 170 Myr and 1 Gyr in our model). The Galactic evolution of other stable isotopes (excluding Li) is not noticeably affected by including novae.

Spectral synthesis codes are essential for inferring stellar parameters and detailed chemical abundances. These codes require many physical inputs to predict an emergent spectrum. Developers adopt the best measurements of those inputs at the time they release their code, but those measurements usually improve over time faster than the software is updated. In general, the impact of using incorrect or uncertain dissociation energies are largely unknown. Here we evaluate how incorrect dissociation energies impact abundances measured from C2, CN, CH, TiO, and MgO features. For each molecule we synthesised optical spectra of FGKM-type main-sequence and giant stars using the literature dissociation energy, and an incorrect (perturbed) dissociation energy. We find that the uncertainties in the dissociation energies adopted by spectral synthesis codes for CN, CH, TiO, and MgO lead to negligible differences in flux or abundances. C2 is the only diatomic molecule where the uncertainty of the inputted dissociation energy translates to a significant difference in flux, and carbon abundance differences of up to 0.2 dex. For Solar-like stars, the impact on carbon abundance is up to 0.09 dex. These large abundance differences demonstrate the importance of updating the inputs adopted by spectral synthesis codes, as well as a consensus on appropriate values between different codes., Comment: 7 pages, 4 figures

Stellar mergers and accretion events have been crucial in shaping the evolution of the Milky Way (MW). These events have been dynamically identified and chemically characterised using red giants and main-sequence stars. RR Lyrae (RRL) variables can play a crucial role in tracing the early formation of the MW since they are ubiquitous, old (t$\ge$10 Gyr) low-mass stars and accurate distance indicators. We exploited Data Release 3 of the GALAH survey to identify 78 field RRLs suitable for chemical analysis. Using synthetic spectra calculations, we determined atmospheric parameters and abundances of Fe, Mg, Ca, Y, and Ba. Most of our stars exhibit halo-like chemical compositions, with an iron peak around [Fe/H]$\approx -$1.40, and enhanced Ca and Mg content. Notably, we discovered a metal-rich tail, with [Fe/H] values ranging from $-$1 to approximately solar metallicity. This sub-group includes almost ~1/4 of the sample, it is characterised by thin disc kinematics and displays sub-solar $\alpha$-element abundances, marginally consistent with the majority of the MW stars. Surprisingly, they differ distinctly from typical MW disc stars in terms of the s-process elements Y and Ba. We took advantage of similar data available in the literature and built a total sample of 535 field RRLs for which we estimated kinematical and dynamical properties. We found that metal-rich RRLs (1/3 of the sample) likely represent an old component of the MW thin disc. We also detected RRLs with retrograde orbits and provided preliminary associations with the Gaia-Sausage-Enceladus, Helmi, Sequoia, Sagittarius, and Thamnos stellar streams., Comment: Accepted for publication in MNRAS. 29 pages, 20 figures

Gaia can not individually resolve very close binary systems, however, the collected data can still be used to identify them. A powerful indicator of stellar multiplicity is the sources reported Renormalized Unit Weight Error (ruwe), which effectively captures the astrometric deviations from single-source solutions. We aim to characterise the imprints left on ruwe caused by binarity. By flagging potential binary systems based on ruwe, we aim to characterise which of their properties will contribute the most to their detectability. We develop a model to estimate ruwe values for observations of Gaia sources, based on the biases to the single-source astrometric track arising from the presence of an unseen companion. Then, using the recipes from previous GaiaUnlimited selection functions, we estimate the selection probability of sources with high ruwe, and discuss what binary properties contribute to increasing the sources ruwe. We compute the maximum ruwe value which is compatible with single-source solutions as a function of their location on-sky. We see that binary systems selected as sources with a ruwe higher than this sky-varying threshold have a strong detectability window in their orbital period distribution, which peaks at periods equal to the Gaia observation time baseline. We demonstrate how our sky-varying ruwe threshold provides a more complete sample of binary systems when compared to single sky-averaged values by studying the unresolved binary population in the Gaia Catalogue of Nearby Stars. We provide the code and tools used in this study, as well as the sky-varying ruwe threshold through the GaiaUnlimited Python package, Comment: 11 pages, 10 figures. Accepted for publication in A&A

When there are many observations of an astronomical source - many images with different dithers, or many spectra taken at different barycentric velocities - it is standard practice to shift and stack the data, to (for example) make a high signal-to-noise average image or mean spectrum. Bound-saturating measurements are made by manipulating a likelihood function, where the data are treated as fixed, and model parameters are modified to fit the data. Traditional shifting and stacking of data can be converted into a model-fitting procedure, such that the data are not modified, and yet the output is the shift-adjusted mean. The key component of this conversion is a spectral model that is completely flexible but also a continuous function of wavelength (or position in the case of imaging) that can represent any signal being measured by the device after any reasonable translation (or rotation or field distortion). The benefits of a modeling approach are myriad: The sacred data never are modified. Noise maps, data gaps, and bad-data masks don't require interpolation. The output can take the form of an image or spectrum evaluated on a pixel grid, as is traditional. In addition to shifts, the model can account for line-spread or point-spread function variations, world-coordinate-system variations, and calibration or normalization variations. The noise in the output becomes uncorrelated across neighboring pixels as the shifts deliver good coverage in some sense. The only cost is a small increase in computational complexity over that of traditional methods. We demonstrate the method with a small data example and we provide open source sample code for re-use., Comment: submitted to AAS Journals

Detailed chemical studies of F/G/K -- or Solar-type -- stars have long been routine in stellar astrophysics, enabling studies in both Galactic chemodynamics, and exoplanet demographics. However, similar understanding of the chemistry of M and late-K dwarfs -- the most common stars in the Galaxy -- has been greatly hampered both observationally and theoretically by the complex molecular chemistry of their atmospheres. Here we present a new implementation of the data-driven \textit{Cannon} model, modelling $T_{\rm eff}$, $\log g$, [Fe/H], and [Ti/Fe] trained on low-medium resolution optical spectra ($4\,000-7\,000\,$\SI{}{\angstrom}) from 103 cool dwarf benchmarks. Alongside this, we also investigate the sensitivity of optical wavelengths to various atomic and molecular species using both data-driven and theoretical means via a custom grid of MARCS synthetic spectra, and make recommendations for where MARCS struggles to reproduce cool dwarf fluxes. Under leave-one-out cross-validation, our \textit{Cannon} model is capable of recovering $T_{\rm eff}$, $\log g$, [Fe/H], and [Ti/Fe] with precisions of 1.4\%, $\pm0.04\,$dex, $\pm0.10\,$dex, and $\pm0.06\,$dex respectively, with the recovery of [Ti/Fe] pointing to the as-yet mostly untapped potential of exploiting the abundant -- but complex -- chemical information within optical spectra of cool stars., Comment: 24 pages, 14 figures, 4 tables. Accepted for publication in MNRAS

The Gaia-ESO Survey is an European Southern Observatory (ESO) public spectroscopic survey that targeted $10^5$ stars in the Milky Way covering the major populations of the disk, bulge and halo. The observations were made using FLAMES on the VLT obtaining both UVES high ($R\sim47,000$) and GIRAFFE medium ($R\sim20,000$) resolution spectra. The analysis of the Gaia-ESO spectra was the work of multiple analysis teams (nodes) within five working groups (WG). The homogenisation of the stellar parameters within WG11 (high resolution observations of FGK stars) and the homogenisation of the stellar parameters within WG10 (medium resolution observations of FGK stars) is described here. In both cases, the homogenisation was carried out using a bayesian Inference method developed specifically for the Gaia-ESO Survey by WG11. The WG10 homogenisation primarily used the cross-match of stars with WG11 as the reference set in both the stellar parameter and chemical abundance homogenisation. In this way the WG10 homogenised results have been placed directly onto the WG11 stellar parameter and chemical abundance scales. The reference set for the metal-poor end was sparse which limited the effectiveness of the homogenisation in that regime. For WG11, the total number of stars for which stellar parameters were derived was 6,231 with typical uncertainties for Teff, log g and [Fe/H] of 32~K, 0.05 and 0.05 respectively. One or more chemical abundances out of a possible 39 elements were derived for 6,188 of the stars. For WG10, the total number of stars for which stellar parameters were derived was 76,675 with typical uncertainties for Teff, log g and [Fe/H] of 64~K, 0.15 and 0.07 respectively. One or more chemical abundances out of a possible 30 elements were derived for 64,177 of the stars., Comment: 31 pages, 19 figures

The spatial distribution of Galactic stars with different chemical abundances encodes information on the processes that drove the formation and evolution of the Milky Way. Survey selection functions are indispensable for analysing astronomical catalogues produced by large-scale surveys. The use of these selection functions in data modelling is more complex when data from different surveys are to be modelled simultaneously. We introduce a procedure for constructing the selection function of a sample of red clump stars that have parallaxes and elemental abundances from the Gaia mission. We separately constructed the selection function of the APOGEE DR17 red clump stars, which depends on very different observables and has a very different spatial coverage. We combined the two surveys and accounted for their joint selection function to provide strong constraints on the radial and vertical density distribution of mono-abundance populations, with Gaia offering a dense coverage of the solar neighbourhood, while APOGEE reaches larger distances near the Galactic plane. We confirm that the radial density profile steepens with increasing metallicity. The combined sample also indicates a metallicity-dependent flaring of the alpha-poor disc. We provide the code for constructing the Gaia selection function we used in this study through the GaiaUnlimited Python package., Comment: 21 pages, 18 figures, accepted for publication in Astronomy & Astrophysics

Stars formed with initial mass over 50 Msun are very rare today, but they are thought to be more common in the early universe. The fates of those early, metal-poor, massive stars are highly uncertain. Most are expected to directly collapse to black holes, while some may explode as a result of rotationally powered engines or the pair-creation instability. We present the chemical abundances of J0931+0038, a nearby low-mass star identified in early followup of SDSS-V Milky Way Mapper, which preserves the signature of unusual nucleosynthesis from a massive star in the early universe. J0931+0038 has relatively high metallicity ([Fe/H] = -1.76 +/- 0.13) but an extreme odd-even abundance pattern, with some of the lowest known abundance ratios of [N/Fe], [Na/Fe], [K/Fe], [Sc/Fe], and [Ba/Fe]. The implication is that a majority of its metals originated in a single extremely metal-poor nucleosynthetic source. An extensive search through nucleosynthesis predictions finds a clear preference for progenitors with initial mass > 50 Msun, making J0931+0038 one of the first observational constraints on nucleosynthesis in this mass range. However the full abundance pattern is not matched by any models in the literature. J0931+0038 thus presents a challenge for the next generation of nucleosynthesis models and motivates study of high-mass progenitor stars impacted by convection, rotation, jets, and/or binary companions. Though rare, more examples of unusual early nucleosynthesis in metal-poor stars should be found in upcoming large spectroscopic surveys., Comment: 11 pages + 22 page appendix, accepted to ApJL