Search

Wood–plastic composites (WPCs) combine the properties of plastics and lignocellulosic fillers. A particular limitation in their use is usually a hydrophobic, poorly wettable surface. The surface properties of materials can be modified using ion implantation. The research involved using composites based on polyethylene (PE) filled with sawdust or bark (40%, 50%, and 60%). Their surfaces were modified by argon ion implantation in three fluencies (1 × 1015, 1 × 1016, and 1 × 1017 cm−2) at an accelerating voltage of 60 kV. Changes in the wettability, surface energy, and surface colour of the WPCs were analysed. It was shown that argon ion implantation affects the distinct colour change in the WPC surface. The nature of the colour changes depends on the filler used. Implantation also affects the colour balance between the individual variants. Implantation of the WPC surface with argon ions resulted in a decrease in the wetting angle. In most of the variants tested, the most significant effect on the wetting angle changes was the ion fluence of 1 × 1017 cm−2. Implantation of the WPC surface also increased the surface free energy of the composites. The highest surface free energy values were also recorded for the argon ion fluence of 1 × 1017 cm−2. [ABSTRACT FROM AUTHOR]

This study explores the possibilities of utilisation of coniferous bark as a filler in wood–polymer composites (WPCs), its impact on properties such as the modulus of rupture (MOR), modulus of elasticity (MOE), thickness swelling (TS) and water absorption (WA) after 2 h and 24 h of immersion in water and the significance of this impact compared to other factors. Six variants of bark–polylactic acid (PLA) WPCs were manufactured, differentiated by their filler content and filler particle size. As a comparison, analogous composites filled with coniferous sawdust were also manufactured. Bark-filled composites were characterised by lower TS and WA after both 2 h and 24 h of immersion, as well as lower water contact angles and surface free energy. The bark filler decreased the composites' MORs and MOEs, while greater differences were noticed for variants filled with small particles. The type of filler was the second most important factor contributing to variance in this study, with the filler content being the most important one. [ABSTRACT FROM AUTHOR]

Image analysis is becoming increasingly popular in many industries. Its use is perfect for, among other things, assessing the quality of products on or off the production line. Highly automated, high-performance systems can be used for this purpose. However, there are situations in which automated vision systems cannot be used on the production line due to the specific nature of the process. One such situation is testing the resistance of paint applied to glass when washing in automatic dishwashers. It is carried out outside the production line, and typical production vision systems are not used here. An attempt was made to develop a cheap and easy-to-implement research method enabling quantitative measurement of paint loss on glass when testing the coating's resistance to automatic washing. For this purpose, analysis of images taken during the study was carried out. The developed method is based on taking a series of photos of the tested object between each stage of the wash resistance test. The obtained photographic material is then analyzed by measuring the size of paint losses expressed in the number of pixels. Then, the percentage of paint loss is calculated. This method is cheap to implement and highly accurate. Statistical analysis of the results confirmed the method's accuracy at 98%. [ABSTRACT FROM AUTHOR]

In this work, pine and birch wood were modified by graphene oxide using a single vacuum impregnation method. The research results indicate that the impregnation of wood with graphene oxide increases the crystallinity of cellulose in both pine and birch wood, and the increase in crystallinity observed in the case of birch was more significant than in the case of pine. FT-IR analyses of pine samples impregnated with graphene oxide showed changes in intensity in the absorption bands of 400–600, 700–1500 cm−1, and 3200–3500 cm−1 and a peak separation of 1102 cm−1, which may indicate new C-O-C connections. In the case of birch, only some differences were noticed related to the vibrations of the OH group. The proposed modification also affects changes in the color of the wood surface, with earlywood containing more graphene oxide than latewood. Analysis of scanning electron microscope images revealed that graphene oxide adheres flat to the cell wall. Considering the differences in the anatomical structure of both wood species, the research showed a statistically significant difference in water absorption and retention of graphene oxide in wood cells. Graphene oxide does not block the flow of water in the wood, as evidenced by the absorbability of the working liquid at the level of 580–602 kg/m3, which corresponds to the value of pure water absorption by wood in the impregnation method using a single negative pressure. In this case, higher graphene oxide retention values were obtained for pine wood. [ABSTRACT FROM AUTHOR]

This research studied the phenolic content compared with the antioxidant properties of various O. vulgare (Lamiaceae) cultivars grown in Poland. The research results in this paper indicate that the dominant ingredient in all oregano cultivars was rosmarinic acid, known for its strong antioxidant properties. The highest amounts of rosmarinic acid (87.16 ± 4.03 mg/g dm) were identified in the O. vulgare spp. hirtum (Link) Ietsw. Other metabolites identified in the studied extracts include luteolin O-di-glucuronide-O-di-pentoside (30.79 ± 0.38 mg/g dm in the 'Aureum' cultivar), 4′-O-glucopyranosyl-3′, 4′-dihydroxy benzyl-protocatechuate (19.84 ± 0.60 mg/g dm in the 'Margerita' cultivar), and p-coumaroyl-triacetyl-hexoside (25.44 ± 0.18 mg/g dm in the 'Margerita' cultivar). 'Hot & spicy' and 'Margerita' cultivars were characterized by the highest activity in eliminating OH• and O2•− radicals. Extracts from Greek oregano had the highest ability to scavenge DPPH radicals and chelate iron ions. This research has also provided new evidence that oregano has anti-migratory, cytotoxic properties and influences the viability of gastric cancer cells (the highest cytotoxicity was attributed to the 'Hot & spicy' cultivar, which performed the worst in antioxidant properties tests). Extracts from the tested cultivars at a concentration of 0.625% effectively inhibited the growth of S. aureus and P. aeruginosa bacteria. It seems that the oregano grown in Poland is of good quality and can be successfully grown on a large scale if the appropriate use is found. [ABSTRACT FROM AUTHOR]

Porous wood-based boards, like any lignocellulosic material, are susceptible to biocorrosion caused by mold fungi. Their durability can be extended by using biocides. Due to the fact that porous boards are considered an ecological material, it would be beneficial to also use natural agents to protect them. For this purpose, the surface of softboards was protected with a 30% solution of cinnamon bark oil in ethanol. Three application levels were used: 75 g/m2, 120 g/m2, and 200 g/m2 of solution. It has been shown that the cinnamon bark oil solution used at an application rate of 200 g/m2 is an effective fungicide, protecting softboards (SBs) against the development of mold fungi: T. viride and C. globosum. The dominant volatile component of cinnamon oil identified in the boards turned out to be cinnamaldehyde. Three months after treatment, this substance constituted 74% of the volatile components. The proposed treatment method allows for short-term preventive protection of boards against mold fungi. [ABSTRACT FROM AUTHOR]

Copyright of Annals of Warsaw University of Life Sciences - SGGW, Forestry & Wood Technology is the property of Wydawnictwo SGGW and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Annals of Warsaw University of Life Sciences - SGGW, Forestry & Wood Technology is the property of Wydawnictwo SGGW and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Annals of Warsaw University of Life Sciences - SGGW, Forestry & Wood Technology is the property of Wydawnictwo SGGW and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)