Search

Ultrafast magnetization switching through the single domain wall (DW) propagation has been reported in amorphous micrometric and submicrometric wires. However the performance of prospective devices utilizing DW propagation is determined by the degree to which DW propagation can be controlled. In this article, we propose a novel method for effectively controlling the single DW propagation in a specially designed array consisting of two magnetic microwires by the stray field from magnetically softer microwires. We have experimentally demonstrated that the DW velocity of magnetically harder Fe-rich microwire in such a linear array is affected by the stray field of magnetically softer Co-rich microwire. Additionally, the domain wall can be trapped in the Fe-rich microwire by the stray field produced by the Co-rich microwire in such a linear array. The observed effect of magnetostatic interaction depends on the position of the Co-rich microwire in such a linear array. Controllable domain wall propagation observed in such a linear array can be a useful tool for simple and more flexible ways of controllable trapping and braking of single DWs in Fe-rich microwires showing spontaneous magnetic bistability.

A preprocessing technique named “spiral annealing” was applied for the first time to magnetic microwires. In this process, the sample was arranged in a flat spiral shape during annealing, and subsequent measurements were conducted on the unbent sample with the induced stress distribution along and transverse to the sample. The research utilized both magnetic and magneto-optical methods. The anisotropy field magnitude in both the volume and surface of the microwire was measured, and for the first time, a direct correlation between the anisotropy field and the curvature of a spirally annealed microwire was established. Additionally, a connection between the type of surface domain structure and the degree of spiral curvature was identified. The preservation of the distribution of spiral annealing-induced magnetic properties both along and across the microwire is a key effect influencing the technological application of the microwire. The range of induced curvature within which a specific helical magnetic structure can exist was also determined. This insight links the conditions of spiral annealing to the selection of microwires as active elements in magnetic sensors.

We have prepared NiMnGa glass-coated microwires with different geometrical aspect ratios, ρ = dmetal/Dtotal (dmetal—diameter of metallic nucleus, and Dtotal—total diameter). The structure and magnetic properties are investigated in a wide range of temperatures and magnetic fields. The XRD analysis illustrates stable microstructure in the range of ρ from 0.25 to 0.60. The estimations of average grain size and crystalline phase content evidence a remarkable variation as the ρ-ratio sweeps from 0.25 to 0.60. Thus, the microwires with the lowest aspect ratio, i.e., ρ = 0.25, show the smallest average grain size and the highest crystalline phase content. This change in the microstructural properties correlates with dramatic changes in the magnetic properties. Hence, the sample with the lowest ρ-ratio exhibits an extremely high value of the coercivity, Hc, compared to the value for the sample with the largest ρ-ratio (2989 Oe and 10 Oe, respectively, i.e., almost 300 times higher). In addition, a similar trend is observed for the spontaneous exchange bias phenomena, with an exchange bias field, Hex, of 120 Oe for the sample with ρ = 0.25 compared to a Hex = 12.5 Oe for the sample with ρ = 0.60. However, the thermomagnetic curves (field-cooled—FC and field-heating—FH) show similar magnetic behavior for all the samples. Meanwhile, FC and FH curves measured at low magnetic fields show negative values for ρ = 0.25, whereas positive values are found for the other samples. The obtained results illustrate the substantial effect of the internal stresses on microstructure and magnetic properties, which leads to magnetic hardening of samples with low aspect ratio.

In this study, we investigated the impact of geometric factors on the magnetic anisotropy of Gd-Fe alloy thin films deposited on nanoporous alumina membranes. By synthesizing Gd-Fe alloy nanostructure thin films with different hole diameters (ranging from 45 to 90 nm) and keeping the layer thickness and lattice parameters fixed at 45 nm and 105 nm, respectively, we observed a significant perpendicular magnetic anisotropy (PMA) in samples with hole diameter above 65 nm. The transition from in-plane to out-of-plane magnetization in Gd-Fe alloy nanostructure thin films occurred at a critical antidot hole diameter of 75 nm. The observed variations in coercivity and remanence with the nanohole diameter are attributed to substantial changes in the magnetization mechanisms induced by the nanoholes. This novel induction of PMA in Gd-Fe alloy nanostructure thin films through the manipulation of geometric parameters in the antidot arrays opens new possibilities for tailoring the magnetic behavior of ferromagnetic metals with pronounced PMA.

We prepared a Mn48Fe22P15Si15 glass-coated microwires (GCMWS) with metallic nucleus diameter, d = 11.2 μm and total diameter, D = 28.3 μm (geometrical aspect ratio d/D = 0.4) for the first time by using the Taylor–Ulitovsky Technique. This low-cost, single-step fabrication approach enabled the preparation of kilometers-long GCMWS from a few grams of low-cost components (Mn, Fe, P, and Si) for a variety of applications. The analysis of the magnetic measurements revealed a well-defined magnetic anisotropy in the whole temperature range. Moreover, relatively hard magnetic properties were observed for the temperature range of 5–400 K, where the average of coercivity, Hc ≈ 465 Oe. Notable magnetic field, H, and temperature dependencies of the magnetic properties were observed. Substantially irreversible magnetic behavior with a blocking temperatures Tb = 97 K at H = 1 kOe and Tb = 50 K at H = 5 kOe upon field cooling was observed. The modification in the magnetic properties of MnFePSi-glass-coated microwires is ascribed to the presence of various magnetic phases resulting from internal stresses induced by the glass coating. Moreover, the elevated Curie temperature (Tc > 400 K) observed in the investigated sample, makes this material as an appealing choice for several industrial applications.

An approach was proposed to control the displacement of domain walls in magnetic microwires, which are employed in magnetic sensors. The velocity of the domain wall can be altered by the interaction of two magnetic microwires of distinct types. Thorough investigations were conducted utilizing fluxmetric, Sixtus–Tonks, and magneto-optical techniques. The magneto-optical examinations revealed transformation in the surface structure of the domain wall and facilitated the determination of the mechanism of external influence on the movement of domain walls in magnetic microwires.