Search

This study synthesized three MoS₂ morphologies—nanospheres, nanoplatelets, and nanosheets—under varied conditions and incorporated them into chitosan membranes. TEM confirmed unique morphologies and crystallinity. Clean water flux showed that the nanoplatelet (P-CM) membrane had the highest flux due to higher porosity. The P-CM membrane excelled in removing Mn²⁺ and Zn²⁺ ions, achieving 93.0 ± 0.5% and 90.4 ± 1.5% removal, outperforming membranes with nanospheres (S-CM) and nanosheets (T-CM). Its superior performance is attributed to thicker nanoplatelets forming more water channels. The MoS₂'s tri-layered structure generated reactive oxygen species (ROS) via H₂O₂ catalysis, contributing to enhanced heavy metal removal. These adsorptive-catalytic membranes combine adsorption with catalytic decomposition of heavy metals, highlighting the work's novelty and superior performance. The membranes demonstrated excellent flux recovery and reusability (96.0 ± 0.5% for P-CM) after chemical cleaning. The findings emphasize the impact of nanomaterial morphologies on membrane performance in water treatment and environmental remediation. [ABSTRACT FROM AUTHOR]

Few-layer two-dimensional (2D) molybdenum disulfide (MoS2) has great potential in designing high-performance supercapacitors due to its high theoretical specific capacity, tunable bandgap, and fascinating 2D layered structure. However, the lack of efficient synthesis methods, cost-effectiveness, and mass production of few-layered MoS2 hindered its practical applications. Moreover, a large gap between theoretical specific capacitance and the experiment comes from the traditional manufacturing approaches involving polymer binders to prepare the electrode for electrochemical testing. We report an accessible and efficient approach to liquid-phase exfoliation of bulk MoS2 into high-quality, few-layered MoS2 using the green method. We have constructed few layered MoS2 on a Ni-foam as an electrode for electrochemical analysis without any polymer binder or black carbon, which exhibits significant improvements in supercapacitor performance compared to the bulk. The highest specific capacitance achieved is 985 F g−1 at 8 A g−1. The 2D layered structure provides stable channels that facilitate K+ intercalation/desorption during charging and discharging processes, helping to prevent the deposition and accumulation of ions. Finally, theoretical calculations were performed to calculate the electronic structure, adsorption energy, diffusion barrier, and charge transfer of K intercalated and adsorbed bulk and monolayer 2H-MoS2, respectively. The calculated migration energy of the K atom diffusion on monolayer MoS2 (0.05 eV) is considerably lower than that of the bulk (0.8 eV), demonstrating a significant enhancement in electrochemical performance with reducing layer thickness. [ABSTRACT FROM AUTHOR]

In this work, a relatively new class of materials, rare earth (RE) based high entropy oxides (HEO) are discussed in terms of the evolution of the oxygen vacant sites (O v ) content in their structure as the composition changes from binary to HEO using both experimental and computational tools; the composition of HEO under focus is the CeLaPrSmGdO due to the importance of ceria-related (fluorite) materials to catalysis. To unveil key features of quinary HEO structure, ceria-based binary CePrO and CeLaO compositions as well as SiO 2 , the latter as representative nonreducible oxide, were used and compared as supports for Ru (6 wt % loading). The role of the O v in the HEO is highlighted for the ammonia production with particular emphasis on the N 2 dissociation step (N 2(ads) → N ads ) over a HEO; the latter step is considered the rate controlling one in the ammonia production. Density functional theory (DFT) calculations and 18 O 2 transient isotopic experiments were used to probe the energy of formation, the population, and the easiness of formation for the O v at 650 and 800 °C, whereas Synchrotron EXAFS, Raman, EPR, and XPS probed the Ce-O chemical environment at different length scales. In particular, it was found that the particular HEO composition eases the O v formation in bulk, in medium (Raman), and in short (localized) order (EPR); more O v population was found on the surface of the HEO compared to the binary reference oxide (CePrO). Additionally, HEO gives rise to smaller and less sharp faceted Ru particles, yet in stronger interaction with the HEO support and abundance of Ru-O-Ce entities (Raman and XPS). Ammonia production reaction at 400 °C and in the 10-50 bar range was performed over Ru/HEO, Ru/CePrO, Ru/CeLaO, and Ru/SiO 2 catalysts; the Ru/HEO had superior performance at 10 bar compared to the rest of catalysts. The best performing Ru/HEO catalyst was activated under different temperatures (650 vs 800 °C) so to adjust the O v population with the lower temperature maintaining better performance for the catalyst. DFT calculations showed that the HEO active site for N adsorption involves the O v site adjacent to the adsorption event.

In line with current research goals involving water splitting for hydrogen production, this work aims to develop a noble-metal-free electrocatalyst for a superior hydrogen evolution reaction (HER). A single-step interfacial activation of Ti 3 C 2 T x MXene layers was employed by uniformly growing embedded WS 2 two-dimensional (2D) nanopetal-like sheets through a facile solvothermal method. We exploited the interactions between WS 2 nanopetals and Ti 3 C 2 T x nanolayers to enhance HER performance. A much safer method was adopted to synthesize the base material, Ti 3 C 2 T x MXene, by etching its MAX phase through mild in situ HF formation. Consequently, WS 2 nanopetals were grown between the MXene layers and on edges in a one-step solvothermal method, resulting in a 2D-2D nanocomposite with enhanced interactions between WS 2 and Ti 3 C 2 T x MXene. The resulting 2D-2D nanocomposite was thoroughly characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) analyses before being utilized as working electrodes for HER application. Among various loadings of WS 2 into MXene, the 5% WS 2 -Ti 3 C 2 T x MXene sample exhibited the best activity toward HER, with a low overpotential value of 66.0 mV at a current density of -10 mA cm -2 in a 1 M KOH electrolyte and a remarkable Tafel slope of 46.7 mV·dec -1 . The intercalation of 2D WS 2 nanopetals enhances active sites for hydrogen adsorption, promotes charge transfer, and helps attain an electrochemical stability of 50 h, boosting HER reduction potential. Furthermore, theoretical calculations confirmed that 2D-2D interactions between 1T/2H-WS 2 and Ti 3 C 2 T x MXene realign the active centers for HER, thereby reducing the overpotential barrier.