Search

Given the increasing demand for electricity due to modernization and population growth, there is an urgent need to develop renewable energy conversion technologies such as photovoltaics. Among these technologies, CsPbIBr2, an all‐inorganic lead halide‐based perovskite, has shown promise due to its thermal stability, phase stability, and ease of fabrication. However, challenges remain, particularly in addressing device hysteresis and stability. Novel materials and optimized device designs could help overcome these challenges. This comprehensive review discusses strategies such as interface engineering, film quality improvement, compositional engineering, defect passivation, band alignments, and metal ion doping to enhance the performance of CsPbIBr2‐based perovskite films and, in turn, their potential for photovoltaic applications. [ABSTRACT FROM AUTHOR]

Photovoltaic is one of the best low-cost alternative energy sources. In this paper, organic semiconductors were explored as light harvesters due to their extraordinary properties, but initially, the scientific community focused on synthesizing the large bandgap organic semiconductors, which were unsuitable for photovoltaic applications. Wide bandgap organic semiconductors can capture light only from the UV–Vis region of the solar spectrum, thus showing solar cells' power conversion efficiency (PCE) of less than 5%. By reducing the bandgap, organic semiconductors can show good compatibility with the air mass (AM) of 1.5 solar spectrums. So, the attention came toward synthesizing low bandgap semiconductors, which led to the enhancement of PCE from 5% to 17%. This review summarizes the overall development of the last 15 years in the field of organic photovoltaic semiconductors. The significant parameters in organic semiconductors are their bandgap, the position of the highest occupied molecular orbital (HOMO), and the lowest unoccupied molecular orbital (LUMO) that can easily be tuned chemically by molecular designing. One of the issues in organic photovoltaic solar devices is the need for absorbers with a narrow bandgap to maximize power conversion efficiencies to a great extent. Moreover, several factors, such as conjugation length, bond length alteration, intermolecular interaction, donor–acceptor charge transfer, planarity, and physical states, are responsible for tuning the bandgap. This review also classifies low bandgap semiconductors based on the core skeleton with their bandgaps, structures, and power conversion efficiencies. [ABSTRACT FROM AUTHOR]

MXene, regarded as cutting‐edge two‐dimensional (2D) materials, have been widely explored in various applications due to their remarkable flexibility, high specific surface area, good mechanical strength, and interesting electrical conductivity. Recently, 2D MXene has served as a ideal platform for the design and development of electrocatalysts with high activity, selectivity, and stability. This review article provides a detailed description of the structural engineering of MXene‐based electrocatalysts and summarizes the uses of 2D MXene in hydrogen evolution reactions, nitrogen reduction reactions, oxygen evolution reactions, oxygen reduction reactions, and methanol/ethanol oxidation. Then, key issues and prospects for 2D MXene as a next‐generation platform in fundamental research and real‐world electrocatalysis applications are discussed. Emphasis will be given to material design and enhancement techniques. Finally, future research directions are suggested to improve the efficiency of MXene‐based electrocatalysts. [ABSTRACT FROM AUTHOR]

Silver infused ultrathin TiO2 nanowires (NWs) were synthesized via a single step solvothermal approach. The crystallinity, structure, and morphology were determined to understand the physicochemical nature of the nanocomposites. The catalytic efficiency of the newly synthesized nanocatalysts was tested for the textile waste treatment taking methylene blue (MB) as model pollutant under solar light irradiations. Nearly 96% photodegradation efficiency for MB was achieved within 20 min. Furthermore, the recyclability of the photocatalyst was also studied, and the material remained stable and effective up to four consecutive runs. Research Highlights: Precise size‐controlled synthesis of Ag‐incorporated titania nanowires (ATNWs)Controlled aspect ratios, with tunable lengths and diameters (100–3 nm) via precursor and surfactant optimizationDemonstrated ATNWs' efficiency in degrading toxic dye, methylene blue (MB)96% photodegradation efficiency for MB achieved within 20 min using 3 nm thick annealed TiO2 NWsRecyclability efficiency of photocatalyst, which remained stable and effective for up to four consecutive runs [ABSTRACT FROM AUTHOR]

Herein, novel nanocomposites based on reduced graphene oxide decorated copper oxide nanoparticles (rGO/CuO) were prepared by the in situ co-precipitation method. The structural, morphological, and optical characterization of as-prepared nanocomposites was performed by powdered x-ray diffraction (p-XRD), scanning electron microscopy (SEM), and Fourier-transform infrared (FTIR), Raman, and ultraviolet-visible (UV-Vis) spectroscopy, respectively. The as-prepared nanocomposites exhibited better photocatalytic activity of rhodamine B dye with maximum ~94% degradation in 120 min with a rate constant of 0.2353 min -1 under optimized conditions. Furthermore, the effects of solution pH and catalyst loading are studied on the degradation process. Therefore, this state-of-the-art strategy for the decoration of CuO nanoparticles onto the surface of rGO nanosheets could be an ideal platform for fabricating highly efficient photocatalysts., (© 2024 Wiley Periodicals LLC.)

Silver infused ultrathin TiO 2 nanowires (NWs) were synthesized via a single step solvothermal approach. The crystallinity, structure, and morphology were determined to understand the physicochemical nature of the nanocomposites. The catalytic efficiency of the newly synthesized nanocatalysts was tested for the textile waste treatment taking methylene blue (MB) as model pollutant under solar light irradiations. Nearly 96% photodegradation efficiency for MB was achieved within 20 min. Furthermore, the recyclability of the photocatalyst was also studied, and the material remained stable and effective up to four consecutive runs. RESEARCH HIGHLIGHTS: Precise size-controlled synthesis of Ag-incorporated titania nanowires (ATNWs) Controlled aspect ratios, with tunable lengths and diameters (100-3 nm) via precursor and surfactant optimization Demonstrated ATNWs' efficiency in degrading toxic dye, methylene blue (MB) 96% photodegradation efficiency for MB achieved within 20 min using 3 nm thick annealed TiO 2 NWs Recyclability efficiency of photocatalyst, which remained stable and effective for up to four consecutive runs., (© 2024 Wiley Periodicals LLC.)