Search

Traffic congestion is a serious problem in the US, and traffic signal control is one of the effective solutions to congestion. Previous research on model predictive control (MPC)-based traffic signal control showed substantial benefits over conventional methods. This study focused on implementing MPC over a large-scale network with complex intersections and the impact of cycle length, network size, and imperfect state estimation on performances. This study implemented a virtual phase link (VPL)-based model predictive control method which used the number of vehicles in each VPL as input state variables and was suitable for National Electrical Manufacturing Association (NEMA) ring-barrier control. To test the impact of network size, the performance of distributed MPC (36 intersections in the network are divided into five subnetworks) was compared with that of MPC over the full network for a set of cycle lengths. To test the impact of imperfect state estimation, we synthetically infused estimation error and developed two scenarios, MPC-error and MPC-error narrow, which had higher and lower estimation errors, respectively. The performance of these MPC methods was compared with that of the existing time-of-day (TOD) method and an offline method that used Webster's method for split and MULTIBAND for cycle length and offset optimization. Trajectory and linkwise signal performance measures were collected from the simulation to evaluate performance. The distributed MPC method with perfect state estimation had the lowest delay and highest energy efficiency of all the methods. The performance of MPC decreased as the prediction inaccuracy increased. MPC-error had 7% and 11% more delay than MPC-error narrow in the morning and evening peaks, respectively. Overall, simulation results suggest that even with imperfect state estimation, MPC methods will outperform offline methods significantly. [ABSTRACT FROM AUTHOR]

Recent advancements in the industrial revolution and artificial intelligence have aided in the development of novel approaches that have considerable potential for increasing the efficiency of traffic networks. Emerging concepts of autonomous driving and machine learning can be incorporated intelligently for improving traffic operations and control. In the coming years, traffic composition can vary in terms of autonomous vehicle (AV) penetration rate, which can lead to a heterogeneous traffic environment. Traffic control methods for such complex networks need to be designed effectively for accommodating the positive effects of AV implementation without compromising the safety and level of service in the presence of regular vehicles (RVs). An intelligent-based optimization framework for traffic signal control under heterogeneous AV-based traffic is proposed in this paper. This framework utilizes state-of-the-art machine-learning approaches to represent and design different components of the optimization process of cycle length. Further, SHapley Additive exPlanations (SHAP) is used to enhance model interpretability. The proposed optimization framework improves performance under congested traffic conditions compared with that of the conventional optimization methods. Compared to pure RV-based traffic, the penetration rates of 25%, 50%, and 100% can decrease optimized cycle lengths by 26%, 39%, and 53%, respectively, which can result in delay reductions of approximately 18%, 31%, and 56%, respectively. The proposed framework when applied in an adaptive-based manner can help in the generalization of controlling existing signalized intersections with the gradual penetration of AVs without the extra infrastructure or specific operational and connectivity capabilities of the involved vehicles. [ABSTRACT FROM AUTHOR]

In urban areas, emergency vehicles (EVs) need efficient traffic signal preemption to ensure timely responses during peak hours. While emergency vehicle traffic signal preemption (EVTSP) has garnered significant attention in the literature, the issues of queue spillbacks and negative impacts on non‐priority traffic have been relatively underreported. These issues are particularly critical during peak hours, notably in densely populated urban areas. This study presents an EVTSP system that considers queue spillbacks on approaches along the routes of EVs and the negative impacts of signal preemption on non‐priority traffic. The proposed control system has four key components: (1) a queue length management algorithm to ensure that an EV will not be impeded by excessive queues, particularly on its initial approaches along its route; (2) a signal preemption algorithm to guarantee uninterrupted passage of an EV even for approaches experiencing queue spillbacks; (3) a traffic status recovery algorithm to alleviate the extra waiting time for non‐priority vehicles after an EV crosses each intersection; and (4) a signal plan recovery algorithm to smoothly transit traffic signals to normal operation. The experimental results confirm that the proposed system considerably improves the travel time of an EV and mitigates the negative impacts on non‐priority traffic. [ABSTRACT FROM AUTHOR]

In current signal control schemes, the prevailing control method is still the arterial coordinated control, which involves coordinating a group of adjacent traffic signals along a major road. However, during the actual implementation process, technicians have observed substantial variations in the effectiveness of mainline coordinated control across different road segments. These variations are attributed to different signal control strategies, giving rise to an ongoing debate regarding the alignment of the beginning or end of the green phase. The impact of these two alignment methods on bandwidth and road capacity in arterial coordinated control remains a subject of controversy. Therefore, this paper aims to compare the two methods using a real-world scenario. Based on the inherent characteristics of coordinated control, a traffic capacity model for coordinated segments was established. Subsequently, the influence of green start alignment and green end alignment on the capacity of green wave segments and the improvement of existing traffic conditions was analyzed using the proposed capacity model. To validate the analytical model, simulations were executed using VISSIM, and data on delay and the number of stops were collected. The conclusion indicates that from the perspective of benefits and safety, green start alignment outperforms green end alignment. This research provides insights for parameter settings in signal coordinated control, with the potential to significantly reduce the number of vehicle stops, and has practical significance for energy conservation and emission reductions. [ABSTRACT FROM AUTHOR]

To improve the effectiveness of model predictive control (MPC) in dynamic traffic signal control strategies, it has been combined with graph convolutional networks (GCNs) and deep reinforcement learning (DRL) technologies. In this study, a neural-network-based traffic signal control optimization method under the MPC framework is proposed. A dynamic correlation matrix is introduced in the predictive model to adapt to the dynamic changes in correlations between nodes over time. The signal control optimization strategy is solved using DRL, where the agent explores the optimal control strategy based on pre-set constraints in the future road environment. The geometric structure and traffic flow data of a real intersection were selected as the simulation validation environment, and a joint simulation was conducted using Python and SUMO. The experimental results indicate that in low-traffic scenarios, the queue length is reduced by more than 2 vehicles compared to the selected comparison methods; in high-traffic scenarios, the queue length is reduced by an average of 17 vehicles. Under the actual traffic data of the intersection, the average speed is increased by 6.4% compared to the fixed timing method; compared to the inductive signal control method, it increases from 9.76 m/s to 11.69 m/s, an improvement of 19.7%, effectively enhancing the intersection signal control performance. [ABSTRACT FROM AUTHOR]

In this work, the connected vehicle's messages are used to create an enhanced adaptive traffic signal control (ATSC) system for improved traffic flow. Few existing studies use connected and automated vehicles (CAVs) to develop traffic signal control algorithms under hybrid connected and autonomous conditions. The proposed approach focuses on a four‐phase traffic intersection with both CAVs and human‐driven vehicles (HVs). CAVs share real‐time state information, and a model called Roads Dynamic Segmentation estimates queuing procedures and vehicle fleet numbers on dynamic road sections. This information is used in the Store and Forward Model (SFM) to predict intersection queuing length. The ATSC system, based on model predictive control (MPC), aims to minimize intersection queue length while considering traffic constraints (undersaturated, saturated, and oversaturated) and avoiding free‐flow problems due to queue overflow. To reduce computational complexity, a linear‐quadratic‐regulator (LQR) is used. Real‐world vehicle trajectories and the SUMO tool are used for experimental purposes. Results show that the proposed method reduces average delay by 38.50% and 33.42% compared to fixed timing and traditional MPC in cases of oversaturated traffic flow with 100% CAV penetration. Even with a penetration rate of only 20%, average delay decreases by 13.65% and 6.50%, respectively. This study showcases not only the potential benefits of CAV in enhancing traffic, but also enables the optimal utilization of green duration in signalized intersection control systems. This helps prevent traffic congestion and ensures the efficient and smooth movement of traffic flow. [ABSTRACT FROM AUTHOR]

This paper introduces an approach to enhance the efficiency of urban intersections by integrating Visible Light Communication (VLC) into a multi-intersection traffic control system. The main objectives include the reduction in waiting times for vehicles and pedestrians, the improvement of overall traffic safety, and the accommodation of diverse traffic movements during multiple signal phases. The proposed system utilizes VLC to facilitate communication among interconnected vehicles and infrastructure. This is achieved by utilizing streetlights, headlamps, and traffic signals for transmitting information. By integrating VLC localization services with learning-driven traffic signal control, the multi-intersection traffic management system is established. A reinforcement learning scheme, based on VLC queuing/request/response behaviors, is utilized to schedule traffic signals effectively. Agents placed at each intersection control traffic lights by incorporating information from VLC-ready cars, including their positions, destinations, and intended routes. The agents devise optimal strategies to improve traffic flow and engage in communication to optimize the collective traffic performance. An assessment of the multi-intersection scenario through the SUMO urban mobility simulator reveals considerable benefits. The system successfully reduces both waiting and travel times. The reinforcement learning approach effectively schedules traffic signals, and the results highlight the decentralized and scalable nature of the proposed method, especially in multi-intersection scenarios. The discussion emphasizes the possibility of applying reinforcement learning in everyday traffic scenarios, showcasing the potential for the dynamic identification of control actions and improved traffic management. [ABSTRACT FROM AUTHOR]

In this paper is present the procedure for introducing the coordination of light signals at five intersections on the Boulevard "St. Kliment Ohridski" in Skopje. The primary purpose of a traffic signal is to assign the right-of-way to intersecting traffic streams for the purpose of ensuring that all streams are served safely and without excessive delay. A properly designed and timed signalized intersection will minimize fuel consumption, delay, and stops without having an adverse effect on safety. Travelers will realize one or more of the following benefits at intersections where the traffic signal is needed, properly designed, and well timed: orderly movement of traffic, increase in the traffic-carrying capacity of the intersection, reduction in the frequency and severity of certain types of crashes, progressed traffic when traveling in a coordinated signal system, and interruption of heavy traffic flow to provide safe opportunities for minor movements. Coordinated signal timing synchronizes traffic movements and manages the progression speed of specific modes where uninterrupted flow is desired along a corridor. While traditionally applied to increase vehicular traffic flow and reduce peak-hour delay, coordinated signal timing can also be optimized for slower speeds, creating an uninterrupted flow for bicyclists or low vehicle progression speeds for a pedestrian-friendly downtown. Signals may also be timed to coordinate transit headways along routes where regular transit service is consistent and has low variability. Coordination of traffic signals can reduce the number of stops along a corridor and provide for a continuous flow of traffic at the target speed. Progression speeds should be set at or below the target speed, rather than existing 85th percentile speeds. [ABSTRACT FROM AUTHOR]

Trajectory data from connected vehicles (CVs) provide a continuous and reliable means of obtaining information that can be leveraged to optimize traffic signals. This paper proposes a real‐time traffic signal control method using CV trajectory data as the sole input. The primary goal of the proposed signal control method is to prevent queue spillover, which may significantly decrease the traffic efficiency on urban networks and induce high delays to the travelers. The proposed method formulates the signal control problem via a linear quadratic optimization model, considering the constraints related to the duration and variability of green lights in practical traffic signal control systems. Compared to conventional max‐pressure‐based methods, the optimization model offers enhanced efficiency in handling these constraints, making it highly suitable for real‐life implementation. The proposed method has undergone testing in both simulated environments and real‐world applications. In the simulation experiments, the proposed method has been demonstrated to effectively reduce spillover risks and outperform a conventional max‐pressure‐based approach even when the CV penetration rate is as low as 5%. In the real‐world experiment, the proposed method had been tested in a traffic network around the Beijing Capital International Airport for several months. The severity of spillovers, which was represented by two performance indicators, had been significantly reduced after implementing the proposed method. [ABSTRACT FROM AUTHOR]

When a work zone is located at an intersection, it greatly reduces the capacity and change the traffic flow characteristics. However, the impacts of work zones have not attracted much attention, and the signal control method of the intersection with a work zone has not been investigated yet. This paper focuses on a specific type of work zone, which is located within the area of an intersection. The saturation flow rate model, traffic wave model, traffic delay model, and emptying time model are proposed to capture the traffic flow characteristics of the intersection with an island work zone, and a signal control model is further put forward. The real data is collected to calibrate, validate, and evaluate the proposed models. The results indicate that the proposed signal control model can reduce about 15.6% of queue length and 17.2% of traffic delay for the intersection with an island work zone. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Exact Sciences is the property of Master Editora and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

With the introduction of connected and automated vehicles (CAVs), the integrated control of traffic signals, lane assignments, and vehicle trajectories becomes feasible, offering notable benefits for enhancing intersection operations. However, during the prolonged transition to an entirely CAV environment, how to fully leverage the advantage of CAVs while considering the characteristics of human‐driven vehicles remains a huge challenge. To address this challenge, this paper proposes a joint optimization method for spatiotemporal resources at isolated intersections under mixed‐autonomy traffic conditions. Initially, the lane assignment optimization problem is modeled as a mixed integer linear program model to maximize the reserve capacity. Subsequently, the signal‐vehicle coupled control is formulated as a dynamic programming model with the objective of reducing vehicle travel time. Additionally, criteria are established to assess the need for re‐optimizing lane assignments. Simulations validate the superiority of the proposed control method over adaptive control in terms of traffic efficiency and intersection capacity amid substantial traffic demand fluctuations. Sensitivity analyses reveal that the proposed control method can yield higher benefits under medium traffic demand levels. Furthermore, the proposed algorithm exhibits no significant sensitivity to the CAV market adoption rate, suggesting its applicability throughout the CAV adoption process. [ABSTRACT FROM AUTHOR]

Machine learning (ML) methods, particularly Reinforcement Learning (RL), have gained widespread attention for optimizing traffic signal control in intelligent transportation systems. However, existing ML approaches often exhibit limitations in scalability and adaptability, particularly within large traffic networks. This paper introduces an innovative solution by integrating decentralized graph-based multi-agent reinforcement learning (DGMARL) with a Digital Twin to enhance traffic signal optimization, targeting the reduction of traffic congestion and network-wide fuel consumption associated with vehicle stops and stop delays. In this approach, DGMARL agents are employed to learn traffic state patterns and make informed decisions regarding traffic signal control. The integration with a Digital Twin module further facilitates this process by simulating and replicating the real-time asymmetric traffic behaviors of a complex traffic network. The evaluation of this proposed methodology utilized PTV-Vissim, a traffic simulation software, which also serves as the simulation engine for the Digital Twin. The study focused on the Martin Luther King (MLK) Smart Corridor in Chattanooga, Tennessee, USA, by considering symmetric and asymmetric road layouts and traffic conditions. Comparative analysis against an actuated signal control baseline approach revealed significant improvements. Experiment results demonstrate a remarkable 55.38% reduction in Eco_PI, a developed performance measure capturing the cumulative impact of stops and penalized stop delays on fuel consumption, over a 24 h scenario. In a PM-peak-hour scenario, the average reduction in Eco_PI reached 38.94%, indicating the substantial improvement achieved in optimizing traffic flow and reducing fuel consumption during high-demand periods. These findings underscore the effectiveness of the integrated DGMARL and Digital Twin approach in optimizing traffic signals, contributing to a more sustainable and efficient traffic management system. [ABSTRACT FROM AUTHOR]

Urbanization has led to accelerated traffic congestion, posing a significant obstacle to urban development. Traditional traffic signal scheduling methods are often inefficient and cumbersome, resulting in unnecessary waiting times for vehicles and pedestrians, exacerbating the traffic situation. To address this issue, this article proposes a dynamic traffic signal scheduling system based on an improved greedy algorithm. Unlike conventional approaches, we introduce a reward function and a cost model to ensure fair scheduling plans. A constraint function is also established, and the traffic signal scheduling is iterated through the feasible matrix using the greedy algorithm to simplify the decision-making process and enhance solution efficiency. Moreover, an emergency module is integrated to prioritize special emergency vehicles, reducing their response time during emergencies. To validate the effectiveness of our dynamic traffic signal scheduling system, we conducted simulation experiments using the Simulation of Urban Mobility (SUMO) traffic simulation suite and the SUMO traffic control interface Traci. The results indicate that our system significantly improves intersection throughput and adapts well to various traffic conditions, effectively resolving urban traffic congestion while ensuring fair scheduling plans. [ABSTRACT FROM AUTHOR]

This paper proposes a reinforcement learning (RL)-based traffic control strategy integrated with attention mechanism for large-scale adaptive traffic signal control (ATSC) system. The proposed attention RL integrates attention mechanism into a multiagent RL model, namely multiagent proximal policy optimization (MAPPO), so as to enable more effective, scalable, and stable learning in complex ATSC envi)ronments. In the attention RL, decentralized policies are trained using a centrally computed critic that shares an attention model, while the attention model selects relevant intersections for each agent to estimate the global critic. This framework effectively reduces the computa)tional complexity and stabilizes the training process, enhancing the ability of RL agents to control large-scale traffic networks. The proposed control strategy is tested in both a large synthetic traffic grid and a large real-world traffic network of Yangzhou city using the microscopic traffic simulation tool, SUMO. Experimental results demonstrate that the proposed approach learns stable and sustainable policies that achieve lower congestion level and faster recovery, which outperforms other state-of-art RL-based approaches, as well as a gap-based actuated controller. [ABSTRACT FROM AUTHOR]

The continuous evolution of artificial intelligence and cyber–physical systems has presented promising opportunities for optimizing traffic signal control in densely populated urban areas, with the aim of alleviating traffic congestion. One area that has garnered significant interest from both researchers and practitioners is the application of deep reinforcement learning (DRL) in traffic signal control. However, DRL-based algorithms often suffer from instability due to the dynamic nature of traffic flows. Discrepancies between the environments used for training and those encountered during deployment often lead to operational failures. Moreover, conventional DRL-based traffic signal control algorithms tend to reveal vulnerabilities when faced with unforeseen events, such as sensor failure. These challenges highlight the need for innovative solutions to enhance the robustness and adaptability of such systems. To address these pertinent issues, this paper introduces StageLight, a novel two-stage multiscale learning approach, which involves learning optimal timings on a coarse time scale in stage 1, while finetuning them on a finer time scale in stage 2. Our experimental results demonstrate StageLight's remarkable capability to generalize across diverse traffic conditions and its robustness to various sensor-failure scenarios. [ABSTRACT FROM AUTHOR]

Traffic light optimization is known to be a cost-effective method for reducing congestion and energy consumption in urban areas without changing physical road infrastructure. However, due to the high installation and maintenance costs of vehicle detectors, most intersections are controlled by fixed-time traffic signals that are not regularly optimized. To alleviate traffic congestion at intersections, we present a large-scale traffic signal re-timing system that uses a small percentage of vehicle trajectories as the only input without reliance on any detectors. We develop the probabilistic time-space diagram, which establishes the connection between a stochastic point-queue model and vehicle trajectories under the proposed Newellian coordinates. This model enables us to reconstruct the recurrent spatial-temporal traffic state by aggregating sufficient historical data. Optimization algorithms are then developed to update traffic signal parameters for intersections with optimality gaps. A real-world citywide test of the system was conducted in Birmingham, Michigan, and demonstrated that it decreased the delay and number of stops at signalized intersections by up to 20% and 30%, respectively. This system provides a scalable, sustainable, and efficient solution to traffic light optimization and can potentially be applied to every fixed-time signalized intersection in the world. Without relying on any infrastructure-based vehicle detectors, the authors present a scalable traffic signal re-timing system that uses a small percentage of connected vehicle trajectories as the only input. Real-world tests demonstrate that the system decreases both delays and number of stops. [ABSTRACT FROM AUTHOR]

This paper introduces a novel approach, Visible Light Communication (VLC), to optimize urban intersections by integrating VLC localization services with learning-based traffic signal control. The system enhances communication between connected vehicles and infrastructure using headlights, streetlights, and traffic signals to transmit information. Through Vehicle-to-Vehicle (V2V) and Infrastructure-to-Vehicle (I2V) interactions, joint data transmission and collection occur via mobile optical receivers. The goal is to reduce waiting times for pedestrians and vehicles, enhancing overall traffic safety by employing flexible and adaptive measures accommodating diverse traffic movements. VLC cooperative mechanisms, transmission range, relative pose concepts, and queue/request/response interactions help balance traffic flow and improve road network performance. Evaluation in the SUMO urban mobility simulator demonstrates advantages, reducing waiting and travel times for both vehicles and pedestrians. The system employs a reinforcement learning scheme for effective traffic signal scheduling, utilizing VLC-ready vehicles to communicate positions, destinations, and routes. Agents at intersections calculate optimal strategies, communicating to optimize overall traffic flow. The proposed decentralized and scalable approach, especially suitable for multi-intersection scenarios, showcases the feasibility of applying reinforcement learning in real-world traffic scenarios. [ABSTRACT FROM AUTHOR]

As our cities become more complex and traffic demand grows, managing such traffic efficiently becomes challenging. Hence, solutions that allow building upon the current traffic light systems and that can be readily deployed are of global interest. In this work, we address the challenge of improving traffic light management at intersections. We propose an agent-based traffic light control system where an agent, one per intersection, dynamically regulates the light's phase cycle depending on the current traffic conditions. To this end, we will rely on Deep Networks to adequately train agents to make good decisions. Simulation results in a realistic scenario using SUMO show that our proposed approach can significantly reduce waiting times, improving transit times by 44% compared to the standard fixed-timing method. Additionally, to assess the effectiveness and reliability of our control algorithm, we introduce new performance metrics. [Display omitted] • A distributed neural network-based agent system optimizes traffic in superblocks. • Every agent manages one intersection using deep Q-learning with experience replay. • Each agent optimizes its intersection and reduces vehicle waiting times. • Compared with fixed time, our algorithm achieves a 44% reduction in waiting times. • Thanks to deep Q-networks, changes in agents' actions allow traffic light adaptation. [ABSTRACT FROM AUTHOR]

A distributed method for concurrent traffic signal and routing control of traffic networks is proposed. The method is based on the multi-commodity store-and-forward model, in which the destinations are the commodities. The system benefits from the communication between vehicles and infrastructure, providing optimal signal timings to intersections and routes to vehicles on a link-by-link basis. Using the augmented Lagrangian to model the constraints into the objective, the baseline centralized problem is decomposed into a set of objective-coupled subproblems, one for each intersection, enabling the solution to be computed by a distributed-gradient projection algorithm. The intersection agents only need to communicate and coordinate with neighboring intersections to ensure convergence to the optimal solution while tolerating suboptimal iterations that offer more flexibility, unlike other distributed approaches. Through microsimulation, we demonstrate the effectiveness of the proposed algorithm in traffic networks with time-varying demand. Computational analysis shows that the distributed problem is suitable for real-time applications. A robustness analysis show that the distributed formulation enables a graceful degradation of the system in case of failure. • A multi-commodity traffic flow model cast into a linear dynamic network. • A distributed algorithm for linear dynamic networks and in particular applicable to multi-commodity urban signal traffic control and routing in a connected vehicle environment. • Demonstration of the real-time applicability and robustness to failure of the proposed algorithm and model. • Comparison through microscopic simulation with the corresponding centralized approach, with a decentralized backpressure algorithm, and with fixed-time. [ABSTRACT FROM AUTHOR]

Max-pressure (MP) is a decentralized adaptive traffic signal control approach that has been shown to maximize throughput for private vehicles. However, MP-based signal control algorithms do not differentiate the movement of transit vehicles from private vehicles or between high and single-occupancy private vehicles. Prioritizing the movement of transit or other high occupancy vehicles (HOVs) is vital to reduce congestion and improve the reliability and efficiency of transit operations. This study proposes OCC-MP: a novel MP-based algorithm that considers both vehicle queues and passenger occupancies in computing the weights of movements. By weighing movements with higher passenger occupancies more heavily, transit and other HOVs are implicitly provided with priority, while accounting for any negative impacts of that priority on single occupancy vehicles. And, unlike rule-based transit signal priority (TSP) strategies, OCC-MP more naturally also accommodates conflicting transit routes at a signalized intersection and facilitates their movement, even in mixed traffic without dedicated lanes. Simulations on a grid network under varying demands and transit configurations demonstrate the effectiveness of OCC-MP at providing TSP while simultaneously reducing the negative impact imparted onto lower occupancy private vehicles. Furthermore, OCC-MP is shown to have a larger stable region for demand compared to rule-based TSP strategies integrated into the MP framework. The performance of OCC-MP is also shown to be robust to errors in passenger occupancy information from transit vehicles and can be applied when passenger occupancies of private vehicles are not available. Finally, OCC-MP can be applied in a partially connected vehicle (CV) environment when a subset of vehicles is able to provide information to the signal controller, outperforming baseline methods at low CV penetration rates. • Integrates passenger occupancy information into max pressure algorithm. • Reduces passenger travel time through prioritizing high occupancy vehicles. • Maintains maximum stability property. • Outperforms benchmark MP algorithms under various traffic conditions. • Performs well under both partial and fully connected vehicle environment. [ABSTRACT FROM AUTHOR]

Decentralized traffic signal control methods, such as max-pressure (MP) control or back-pressure (BP) control, have gained increasing attention in recent years. MP control, in particular, boasts mathematically-proven network throughput properties, enabling it to optimize network throughput and stabilize vehicle queue lengths whenever possible. Urban traffic volume is dynamic and features a non-uniform distribution throughout the network. Specifically, heavier traffic is often observed along arterial corridors or major origin–destination streams, such as those in central business districts (CBD), while less traffic is found on sub-arterial roads. To address these issues, many existing signal plans incorporate coordinated signal timing. Numerous previous studies have formulated signal coordination optimization as mixed-integer programming problems, with most belonging to centralized traffic signal controller categories. However, centralized approaches do not scale well to larger city networks. In this paper, we introduce a novel max-pressure signal control approach called Smoothing-MP, which considers signal coordination in urban networks to achieve both maximum vehicle stability and reduced travel time and delay along specific urban corridors, without altering the original stable region proposed by Varaiya (2013). This study represents a pioneering effort in modifying max-pressure control to incorporate signal coordination. Crucially, this policy retains the decentralized characteristic of the original max-pressure control, relying exclusively on local information sourced from upstream and downstream intersections. To evaluate the proposed Smoothing-MP control, we executed simulation studies on two different types of networks, the Downtown Austin Network and a Grid Network. The results unequivocally show that Smoothing-MP matches the maximum throughput of the original MP control. Moreover, it significantly reduces both travel time and delay along coordinated corridors. This dual accomplishment underscores the efficacy and potential advantages of the Smoothing-MP control approach. • For the first time, this research integrates max-pressure control with signal coordination, marking a significant advancement in traffic management strategies. • It enhances the practical applicability of max-pressure control, making it more viable for real-world traffic systems. • The newly proposed max-pressure signal control modification retains the ability to achieve maximum network throughput while preserving the original max-pressure control's stable region. • Simulations were conducted using the Downtown Austin Network and a Grid Network, focusing on selected corridors to demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Traffic signal control has always been a hot topic in the field of intelligent transportation. With the increasing complexity of urban traffic conditions due to urbanization, how to develop effective scheduling strategies to adapt to the changing traffic demands has become a key problem in current intelligent transportation. In light of this, this paper focuses on the traffic signal control problem at intersections and proposes a composite intelligent traffic signal control model based on heterogeneous graph neural networks with dual attention mechanisms and deep reinforcement learning. For the first time, the model incorporates the dual attention mechanism in graph neural networks into the traffic signal control, integrating graph neural networks with deep reinforcement learning techniques and traffic intersection scenarios. This allows for the construction of traffic condition models and the scheduling control of traffic resources, catering to the perception and decision-making needs in complex traffic environments. Firstly, the graph relationship representation of intersection resources is established, constructing the graph information structure for traffic flow and signal states. Then, a heterogeneous graph neural network is designed, incorporating both node-level and semantic-level dual attention mechanisms to characterize the traffic state and explore the relationships, enabling the extraction of explicit and implicit information in traffic intersections. Lastly, a deep reinforcement learning algorithm that combines Double Deep Q-Network (DDQN) and Dueling DQN is implemented to improve the algorithm's generalization and execution efficiency, enhancing the adaptability and stability of traffic signal scheduling in complex environments. Simulation tests are conducted on the SUMO simulation platform using real-world application datasets. Compared to four other similar traffic control model, the proposed model demonstrates performance advantages of more than 13% in terms of average reward, average delay, queue length, and waiting time. This validates the effectiveness of the proposed model. [ABSTRACT FROM AUTHOR]

Conventional platooning control algorithms that improve traffic flow require complex computations and are not well-suited for real-time operations. Moreover, prior research has primarily concentrated on idealized settings, such as isolated intersections or corridors that solely consist of fully connected automated vehicles (CAVs), making it challenging to be applied to real-world traffic systems. To overcome these challenges, this paper aims to design an innovative learning framework based on arrival timing vectors (ATVs) and traffic signal synchronization for platooning control that can improve traffic throughput and reduce fuel consumption through four basic platoon maneuvers: split, acceleration, deceleration, and no-op. We integrate reinforcement learning (RL) with neural networks (NNs) to model non-linear relationships between inputs and outputs for a complex application. The utilization of ATVs as inputs in our proposed framework furnishes an agent with ample information to facilitate a better comprehension of the actions that need to be taken for particular states. Additionally, our proposed DRL-based platooning control collaborates with traffic signal synchronization across adjacent intersections to optimize traffic efficiency in a further step. Numerical experiments have been conducted on both corridor and network scenarios, demonstrating the positive effects of synchronization and DRL-based platooning control on average delay and fuel consumption. Various DRL-based methods have been compared to demonstrate the fast convergence and improved mobility of our proposed algorithm. Furthermore, our algorithm shows robust performance in mixed-traffic environments of CAV and human-driven vehicles. • A new DRL framework using deep learning to manipulate vehicle platoon behaviors. • The approach integrates platooning control with traffic signal synchronization. • A comparison shows the 2DSARSA algorithm outperforms other popular DRL methods. • Case studies showed DRL-based control reduce delay and fuel use in different networks. [ABSTRACT FROM AUTHOR]

Traditional traffic signal control is one of the most widely used urban traffic control methods, due to its high efficiency, robustness, and simplicity. However, in the era of connected and automated vehicles (CAVs), it is prospective to enhance traffic control precision and achieve vehicle coordination in a more efficient manner. Focusing on an isolated intersection, this study proposes an innovative concept of Fine-grained Phase (FP) for CAV-enabled traffic control, which realizes more refined right-of-way allocation than traditional signal phases while preserving the simplicity and scalability. The development of FP jointly optimizes traffic control strategy and intersection layout design to fully utilize time-space resources, and multiple forms of FP could be generated in response to various traffic demands; meanwhile, vehicle coordination is achieved in an offline–online manner to balance solution quality and efficiency. Under the FP-based control, each lane is assigned with periodical entry time points using FP design results, then vehicles are supposed to catch up with the appropriate time points to fulfill their trips. Theoretical analyses are conducted under stationary vehicle arrival patterns, where the average delay and the intersection capacity associated with different forms of FP can be analytically acquired. For the implementation of FP-based control, we construct a general offline–online framework, consisting of an offline model that optimizes the geometry of the conflict zone at intersections and the control strategy of vehicles simultaneously, which is formulated as a mixed-integer linear programming problem, and an online FP adoption mechanism that can adapt to varying demand patterns. Under the framework, limited online computation is required, facilitating its practical real-time implementation. Simulation studies under a variety of demand settings show that FP-based control is advantageous over benchmark methods in reducing vehicle delay and also improving intersection capacity in most cases; even for cases with extremely imbalanced demands, FP-based control can admit comparable throughput, while the average delay is much smaller. In addition, results of computation time reveal that FP-based control could realize real-time implementation with negligible computation burden. • An innovative concept called FP for intersection traffic control with CAVs. • Joint optimization of traffic control and intersection layout design. • Offline–online implementation framework to balance solution quality and efficiency. • Theoretical analysis for average vehicle delay and admissible traffic capacity. • Improvement over signalized control and the state-of-art reservation strategy. [ABSTRACT FROM AUTHOR]

Single occupancy vehicles are the most attractive transportation alternative for many commuters, leading to increased traffic congestion and air pollution. Advancements in information technologies create opportunities for smart solutions that incentivize ridesharing and mode shift to higher occupancy vehicles (HOVs) to achieve the car lighter vision of cities. In this study, we present HumanLight, a novel decentralized adaptive traffic signal control algorithm designed to optimize people throughput at intersections. Our proposed controller is founded on reinforcement learning with the reward function embedding the transportation-inspired concept of pressure at the person-level. By rewarding HOV commuters with travel time savings for their efforts to merge into a single ride, HumanLight achieves equitable allocation of green times. Apart from adopting FRAP, a state-of-the-art (SOTA) base model, HumanLight introduces the concept of active vehicles, loosely defined as vehicles in proximity to the intersection within the action interval window. The proposed algorithm showcases significant headroom and scalability in different network configurations considering multimodal vehicle splits at various scenarios of HOV adoption. Improvements in person delays and queues range from 15% to over 55% compared to vehicle-level SOTA controllers. We quantify the impact of incorporating active vehicles in the formulation of our RL model for different network structures. HumanLight also enables regulation of the aggressiveness of the HOV prioritization. The impact of parameter setting on the generated phase profile is investigated as a key component of acyclic signal controllers affecting pedestrian waiting times. HumanLight's scalable, decentralized design can reshape the resolution of traffic management to be more human-centric and empower policies that incentivize ridesharing and public transit systems. [Display omitted] • HumanLight is the first scalable human-centric RL-based adaptive signal controller. • Scalability is enabled from the decentralized design and algorithmic formulation. • HumanLight can democratize urban traffic by equitably allocating green times. • Active vehicles are proposed to handle the variance in occupancy of multimodal traffic. • HumanLight offers policymakers control of the aggressiveness in HOV prioritization. [ABSTRACT FROM AUTHOR]

• The effect of "backpressure" on responsive signal control performance in one simple network is studied. • Only a simple network is considered and travellers are supposed to choose their own best routes. • It is shown that on the simple network having backpressure increases equilibrium delays. • It is shown that on the simple network having backpressure reduces network capacity. Many responsive traffic signal control strategies are "pressure-driven". These strategies move green-time from stages with a lower pressure to stages with a higher pressure, at each junction; often aiming to approximately equalise stage pressures at each junction. In some of these pressure-driven strategies each stage pressure at a junction includes a "backpressure" term, which depends on downstream links. Such backpressure terms reduce the pressure on stages and reduce pressure most for those stages leading toward the most highly congested downstream road links. The expectation is that there will then be a reduction in traffic flow exiting the junction toward already highly congested road links, and that this will reduce queue lengths and network delays. This paper shows that this is not always the case by giving two examples where having backpressure within the control policy on a network with two signal controlled junctions (1) increases both equilibrium delays at one of the junctions for certain demands, and (2) never reduces any of the equilibrium delays at either junction. A simple dynamic evolution with a steady reduction in demand is also shown in which two of the considered policies, one with backpressure, give rise to equilibrium delays and queues which tend to infinity, and reveal a gap; in this gap feasible demands have no equilibrium consistent with the two control policies and in a day-to-day dynamical context delays and queues are unbounded. This paper considers only the simple network shown in figure 1 under certain specified conditions. One main avenue for further research might be to consider whether the results shown here also hold in different networks under different conditions. [ABSTRACT FROM AUTHOR]

Signal control has been effective to alleviate urban traffic congestion. Massive related works about signal timing optimization have been proposed and led to many signal control methods and systems. In recent years, reinforcement learning (RL) algorithms have attracted the increasing attention of researchers in the area of signal control optimization, since they can learn the optimal timing policy themselves by analyzing changing patterns between the traffic condition and signal timing plans. Multi-intersection traffic signal control problems face more challenges than classical single intersection problems such as the dimensionality issue as the joint action space of multiple agents grows exponentially with the number of intersections. The existing state-of-art multi-agent reinforcement learning algorithms developed for other areas may not suit well with traffic signal control given the complex spatial–temporal nature of traffic flows. In this paper, we propose a novel multi-agent counterfactual actor–critic with scheduler (MACS) framework for multiple interactions. In this method, decentralized actors control the traffic signals and the centralized critic combines recurrent policies with feed-forward critics. Additionally, a scheduler module that exchanges information among agents helps the individual agent better understand the entire environment. The proposed method was evaluated using simulation experiments based on a real-world urban street network in Shenzhen, China. Results showed that the proposed method outperforms the classic model-based method and several existing RL-based methods according to different measures such as queue length, average travel time delay, and throughput. • Develop an AI-based signal control framework to collaborate multiple intersections. • The counterfactual baseline can well assign the credit among multiple intersections. • The scheduler module helps agents better understand the entire environment. [ABSTRACT FROM AUTHOR]

Mixed traffic flow involving connected and automated vehicles (CAVs) and human-driven vehicles (HDVs) will be a new state in the future traffic pattern. However, the inherent "stop-and-go" mode of existing traffic signal control seriously weakens the advantage of CAV cooperative operation in mixed traffic. To handle this problem, this study proposes a novel traffic signal control scheme that addresses a mixed traffic scenario at a typical intersection. Specifically, the control scheme can precisely match traffic demand and space-time supply. Then, a protocol of white phases is proposed to decrease the crossing time of CAVs. Finally, the traffic signals and vehicle trajectories are optimized in a unified control framework that minimizes the travel delay of all vehicles. The proposed scheme is verified in SUMO-based simulation considering various penetration rates of the CAVs, different input traffic volumes, and different proportions of left-turning traffic. The experimental results show that the proposed scheme is superior to existing actuated signal control regarding stability when facing different input traffic volumes and proportions of left-turning traffic. Moreover, it is observed that the travel delay decreases with the penetration rates of the CAVs, indicating the potential of the proposed method in the near future mixed traffic scenario. • Matching traffic demand and space-time supply improves intersection efficiency. • Reservation-based phase can improve the control stability in dynamic traffic flow. • Average vehicle delay decreases with the increased number of CAVs. • Introducing white phases can decrease the crossing time of CAVs. [ABSTRACT FROM AUTHOR]