Search

This paper demonstrates a non-destructive technique to evaluate the internal microstructure in the Sn-Ag-Cu (SAC) solder joint through synchrotron X-ray radiation tomography. Synchrotron X-ray tomography is increasingly utilized for characterizing the internal microstructure of materials in 3D images. A 3D model is reconstructed from a set of 2D projection images taken from different angles and angular position during the sample rotation, thus it could provide a more comprehensive description of the microstructure of an alloy compared to 2D images. In this paper, it is successfully observed and evaluated the internal microstructure of a 900 µm solder joint sample. The key principles and methods of synchrotron X-ray tomography are briefly described. Examples of quantitative and qualitative assessments on the grain refinement effect of Mg addition to SAC35 solder joint are also presented in this paper. [ABSTRACT FROM AUTHOR]

Full-field transmission X-ray microscopy (TXM) in conjunction with X-ray absorption near edge structure (XANES) spectroscopy provides two-dimensional (2D) or three-dimensional (3D) morphological and chemical-specific information within samples at the tens of nanometer scale. This technique has a broad range of applications in materials sciences and battery research. Despite its extensive applicability, 2D XANES imaging is subject to the disadvantage of information overlap when the sample thickness is uneven. 3D XANES imaging combines 3D TXM with XANES to obtain 3D distribution information on chemical states. A 3D XANES imaging method has been established at the Shanghai Synchrotron Radiation Facility (SSRF) and has been used to characterize the structure and chemical state of commercial LiNixCoyMnzO2 (NCM, x + y + z = 1) battery powder materials. The imaging results provide a visual representation of the 3D chemical state information of the particles with depth resolution, allowing for the direct observation of 3D nickel oxidation. This paper will describe in detail the data acquisition, data processing, quantification and visualization analysis of 3D XANES imaging. [ABSTRACT FROM AUTHOR]

With the continuous development of synchrotron radiation light sources, higher requirements have been put forward for the stability of double-crystal monochromators in synchrotron radiation facilities. This paper designs an active adjustment mechanism for a double-crystal monochromator to improve its stability. Firstly, three spatial degrees of freedom are designed based on the active adjustment mechanism of flexible leaf spring parallel coupling, and the prototype of the mechanism is fabricated. Secondly, system identification experiments are carried out and the system transfer function curve is fitted by the nonlinear least squares method. Thirdly, the controller based on non-singular terminal sliding modes and a finite-time disturbance observer was designed for stability control and disturbance compensation. Finally, the effectiveness of the controller is verified by a model-in-the-loop approach based on the performance of the real-time target machine. The results show that the non-singular terminal sliding mode + finite-time disturbance observer control strategy can reduce the RMS value of the vibration displacement of Axis-1/Axis-2/Axis-3 by 81.25%, 78.53%, and 71.82%. [ABSTRACT FROM AUTHOR]

The BL17B beamline at the Shanghai Synchrotron Radiation Facility was first designed as a versatile high‐throughput protein crystallography beamline and one of five beamlines affiliated to the National Facility for Protein Science in Shanghai. It was officially opened to users in July 2015. As a bending magnet beamline, BL17B has the advantages of high photon flux, brightness, energy resolution and continuous adjustable energy between 5 and 23 keV. The experimental station excels in crystal screening and structure determination, providing cost‐effective routine experimental services to numerous users. Given the interdisciplinary and green energy research demands, BL17B beamline has undergone optimization, expanded its range of experimental methods and enhanced sample environments for a more user‐friendly testing mode. These methods include single‐crystal X‐ray diffraction, powder crystal X‐ray diffraction, wide‐angle X‐ray scattering, grazing‐incidence wide‐angle X‐ray scattering (GIWAXS), and fully scattered atom pair distribution function analysis, covering structure detection from crystalline to amorphous states. This paper primarily presents the performance of the BL17B beamline and the application of the GIWAXS methodology at the beamline in the field of perovskite materials. [ABSTRACT FROM AUTHOR]

With the development of synchrotron radiation sources and high-frame-rate detectors, the amount of experimental data collected at synchrotron radiation beamlines has increased exponentially. As a result, data processing for synchrotron radiation experiments has entered the era of big data. It is becoming increasingly important for beamlines to have the capability to process large-scale data in parallel to keep up with the rapid growth of data. Currently, there is no set of data processing solutions based on the big data technology framework for beamlines. Apache Hadoop is a widely used distributed system architecture for solving the problem of massive data storage and computation. This paper presents a set of distributed data processing schemes for beamlines with experimental data using Hadoop. The Hadoop Distributed File System is utilized as the distributed file storage system, and Hadoop YARN serves as the resource scheduler for the distributed computing cluster. A distributed data processing pipeline that can carry out massively parallel computation is designed and developed using Hadoop Spark. The entire data processing platform adopts a distributed microservice architecture, which makes the system easy to expand, reduces module coupling and improves reliability. [ABSTRACT FROM AUTHOR]

Coal and biomass are important feedstocks for carbon energy from thermochemical conversion process. Fully understanding the analytical technology that characterizes the changes in physicochemical properties and structural characteristics of coal and biomass during the thermochemical reactions is a key prerequisite for the realization of appropriate utilization of energy fuels. Modern in-situ process analysis technology can accomplish the in-situ detection of the experimental process, and therefore reflect the experimental process more accurately. Moreover, it is developing towards automation, intelligentization, and comprehensive detection. Based on the characteristics of each detection technology, this paper summarizes the basic principles, application scope and performance characteristics of the three advanced in-situ process analysis technologies: hyphenated technology, synchrotron radiation, and online analysis. The practicability and accuracy of each detection technology in coal and biomass research are compared and analyzed, and its latest application and development trend are elucidated. These tools not only make up for the shortcomings of traditional detection techniques in characterizing the in-situ reaction, but also provide complementary information on molecular microscopic changes during fuel thermal conversion. This review paper can provide insights for relevant researchers in the selection of analytical techniques, and promote in-depth study on microcosmic mechanism of fuel conversion. [ABSTRACT FROM AUTHOR]

High-pixel-number synchrotron radiation computed tomography (CT) has the advantages of high sensitivity, high resolution, and a large field of view. It has been widely used in biomedicine, cultural heritage research, non-destructive testing, and other fields. The Nyquist sampling theorem states that when the detector's pixels per row are increased, it requires more CT projections, resulting in a lengthened CT scan time and increased radiation damage. Sparse-view CT can significantly reduce radiation damage and improve the projection data acquisition speed. However, there is insufficient sparse projection data, and the slices reconstructed show aliasing artifacts. Currently, aliasing artifact correction processes more medical CT images, and the number of pixels of such images is small (mainly 512 × 512 pixels). This paper presents an aliasing artifact correction algorithm based on deep learning for synchrotron radiation CT with a high pixel number ( 1728 × 1728 pixels). This method crops high-pixel-number CT images with aliasing artifacts into patches with overlapping features. During the network training process, a convolutional neural network is utilized to enhance the details of the patches, after which the patches are reintegrated into a new CT slice. Subsequently, the network parameters are updated to optimize the new CT slice that closely approximates the full-view slice. To align with practical application requirements, the neural network is trained using only three samples to optimize network parameters and applied successfully to untrained samples for aliasing artifact correction. Comparative analysis with typical deep learning aliasing artifact correction algorithms demonstrates the superior ability of our method to correct aliasing artifacts while preserving image details more effectively. Furthermore, the effect of aliasing artifact correction at varying levels of projection sparsity is investigated, revealing a positive correlation between image quality after deep learning processing and the number of projections. However, the trade-off between rapid experimentation and artifact correction remains a critical consideration. [ABSTRACT FROM AUTHOR]

The issue of preserving carbonatic stones of cultural heritage (CH) restored in the past that have undergone new decay phenomena is strongly emerging and conservation science has not yet found a reliable solution. In this paper, we propose the application of synchrotron radiation X-ray diffraction computed tomography (XRDCT) to explore the effects of using inorganic-mineral products (ammonium oxalate; ammonium phosphate) in sequence as a novel, compatible and effective re-treatment approach to consolidate decayed carbonatic stones already treated with inorganic-mineral treatments. High-quality XRDCT datasets were used to qualitatively/quantitatively investigate and 3D localize the complex mixture of crystalline phases formed after the conservation re-treatments within a porous carbonatic stone substrate. The XRDCT reconstruction images and the structural refinements of XRD patterns with the Rietveld methods showed that the phase composition of reaction products, their volume distribution, and weight fraction vary as a function of the treatment sequence and penetration depth. The high potential of XRDCT allows (i) assessment of peculiar trends of each treatment/treatment sequence; (ii) exploration of the reaction steps of the sequential treatments and (iii) demonstration of the consolidating effect of inorganic re-treatments, non-destructively and at the micron scale. Above all, our study (i) provides new analytical tools to support the conservation choices, (ii) showcases new analytical possibilities for XRDCT in conservation science, including in investigations of CH materials and decay processes, and (iii) opens up new perspectives in analytical chemistry and material characterisation for the non-destructive and non-invasive analysis of reactions within heterogeneous polycrystalline systems. [ABSTRACT FROM AUTHOR]

Laser beam welding as a reliable tool for high-precision joining of batteries or microelectronics is more and more the choice for achieving reproducible results in production processes. In addition to a high automation capability, the precise control of the energy deposition into the material plays an important role, especially when highly reflective materials, such as copper or aluminum, must be welded together. Alongside the use of highly brilliant fiber lasers in the near-infrared range with a focal diameter of a few tens of micrometers, diode lasers in the wavelength range of 445 nm are increasingly being used. Here, beam diameters of a few hundred micrometers can be achieved. With a wavelength of 445 nm, the absorptivity in copper can be increased by more than a factor of 10 compared to a near-infrared laser beam sources in solid state at room temperature. This paper presents the in situ X-ray observation of laser welding processes on CuSn6 with a laser beam source with a wavelength of 445 nm using synchrotron radiation at DESY Petra III Beamline P07 EH4 in Hamburg, Germany. For the experiments, the laser radiation was focused via two separate optics to focal diameters of 362 µm and 609 µm. To characterize the dynamics of the vapor capillaries depending on the different focal diameters dF, the parameters were varied with respect to laser power PL and feed rate v. For the investigations, a synchrotron beam of 2 × 2 mm2 in size with a photon energy of 89 keV was used, and the material samples were analyzed by means of phase-contrast videography to show the boundaries between solid, liquid, and gaseous material phases. The results of this paper show the welding depths achieved and how the geometry of the vapor capillary behaves by changing the focal diameter, laser power and feed rate. [ABSTRACT FROM AUTHOR]

In recent years, China's advanced light sources have entered a period of rapid construction and development. As modern X-ray detectors and data acquisition technologies advance, these facilities are expected to generate massive volumes of data annually, presenting significant challenges in data management and utilization. These challenges encompass data storage, metadata handling, data transfer and user data access. In response, the Data Organization Management Access Software (DOMAS) has been designed as a framework to address these issues. DOMAS encapsulates four fundamental modules of data management software, including metadata catalogue, metadata acquisition, data transfer and data service. For light source facilities, building a data management system only requires parameter configuration and minimal code development within DOMAS. This paper firstly discusses the development of advanced light sources in China and the associated demands and challenges in data management, prompting a reconsideration of data management software framework design. It then outlines the architecture of the framework, detailing its components and functions. Lastly, it highlights the application progress and effectiveness of DOMAS when deployed for the High Energy Photon Source (HEPS) and Beijing Synchrotron Radiation Facility (BSRF). [ABSTRACT FROM AUTHOR]

The digital restoration of historical manuscripts centers on deciphering hidden writings, made imperceptible to the naked eye due to factors such as erasure, fading, carbonization, and aging effects. Recent advancements in modern technologies have significantly improved our ability to unveil and interpret such written cultural heritage that, for centuries, had remained inaccessible to contemporary understanding. This paper aims to present a critical overview of state-of-the-art technologies, engaging in discussions about perspectives and limitations, and anticipating future applications. Serving as a practical guide, this work seeks to assist in the selection of techniques for digitally restoring ancient writings. Additionally, potential and challenges associated with integrating these techniques with advanced machine-learning approaches are also outlined. [ABSTRACT FROM AUTHOR]

X-ray mirrors for synchrotron radiation are often bent into a curved figure and work under grazing-incidence conditions due to the strong penetrating nature of X-rays to most materials. Mirrors of different cross sections have been recommended to reduce the mirror's slope inaccuracy and clamping difficulty in order to overcome mechanical tolerances. With the development of hard X-ray focusing, it is difficult to meet the needs of focusing mirrors with small slope error with the existing mirror processing technology. Deformable mirrors are adaptive optics that can produce a flexible surface figure. A method of using a deformable mirror as a phase compensator is described to enhance the focusing performance of an X-ray mirror. This paper presents an active piezoelectric plane X-ray focusing mirror with a linearly changing thickness that has the ability of phase compensation while focusing X-rays. Benefiting from its special structural design, the mirror can realize flexible focusing at different focusing geometries using a single input driving voltage. A prototype was used to measure its performance under one-dimension and two-dimension conditions. The results prove that, even at a bending magnet beamline, the mirror can easily achieve a single-micrometre focusing without a complicated bending mechanism or high-precision surface processing. It is hoped that this kind of deformable mirror will have a wide and flexible application in the synchrotron radiation field. [ABSTRACT FROM AUTHOR]

The Circular Electron–Positron Collider (CEPC) in China can also work as an excellent powerful synchrotron light source, which can generate high‐quality synchrotron radiation. This synchrotron radiation has potential advantages in the medical field as it has a broad spectrum, with energies ranging from visible light to X‐rays used in conventional radiotherapy, up to several megaelectronvolts. FLASH radiotherapy is one of the most advanced radiotherapy modalities. It is a radiotherapy method that uses ultra‐high dose rate irradiation to achieve the treatment dose in an instant; the ultra‐high dose rate used is generally greater than 40 Gy s−1, and this type of radiotherapy can protect normal tissues well. In this paper, the treatment effect of CEPC synchrotron radiation for FLASH radiotherapy was evaluated by simulation. First, a Geant4 simulation was used to build a synchrotron radiation radiotherapy beamline station, and then the dose rate that the CEPC can produce was calculated. A physicochemical model of radiotherapy response kinetics was then established, and a large number of radiotherapy experimental data were comprehensively used to fit and determine the functional relationship between the treatment effect, dose rate and dose. Finally, the macroscopic treatment effect of FLASH radiotherapy was predicted using CEPC synchrotron radiation through the dose rate and the above‐mentioned functional relationship. The results show that the synchrotron radiation beam from the CEPC is one of the best beams for FLASH radiotherapy. [ABSTRACT FROM AUTHOR]

Advanced accelerator-based light sources such as free electron lasers (FEL) accelerate highly relativistic electron beams to generate incredibly short (10s of femtoseconds) coherent flashes of light for dynamic imaging, whose brightness exceeds that of traditional synchrotron-based light sources by orders of magnitude. FEL operation requires precise control of the shape and energy of the extremely short electron bunches whose characteristics directly translate into the properties of the produced light. Control of short intense beams is difficult due to beam characteristics drifting with time and complex collective effects such as space charge and coherent synchrotron radiation. Detailed diagnostics of beam properties are therefore essential for precise beam control. Such measurements typically rely on a destructive approach based on a combination of a transverse deflecting resonant cavity followed by a dipole magnet in order to measure a beam's 2D time vs energy longitudinal phase-space distribution. In this paper, we develop a non-invasive virtual diagnostic of an electron beam's longitudinal phase space at megapixel resolution (1024 × 1024) based on a generative conditional diffusion model. We demonstrate the model's generative ability on experimental data from the European X-ray FEL. [ABSTRACT FROM AUTHOR]

Active galactic nuclei (AGNs), either radio-quiet or radio-loud, had never been observed in X-ray polarized light until the advent of the Imaging X-ray Polarimetry Explorer (IXPE) in the end of 2021. This satellite opened a new observational window for studying supermassive black holes and their complex environment. In this regard, radio-quiet AGNs are probably better targets than radio-loud objects to probe accretion processes due to the lack of synchrotron emission from jets that can dilute the polarized signal from the central engine. Their relatively clean environment not only allows to detect and measure the X-ray polarization originating from the hot corona responsible for X-ray emission, but also to assess the geometry of the media immediately surrounding the supermassive black hole. Such geometrical measurements work just as well for characterizing the corona morphology in pole-on AGNs as it does for determining the three-dimensional shape of the circumnuclear cold obscurer (the so-called torus) in edge-on AGNs. In this review paper, we will return to each of the observations made by IXPE so far in the field of radio-quiet AGNs and highlight the fundamental contribution of X-ray polarimetry to our understanding of how light is emitted and how matter is shaped around supermassive black holes. [ABSTRACT FROM AUTHOR]

In light of recent advancements in synchrotron radiation technology and nano-technology, there has been a marked increase in the need for ultra-precision nano-positioning mechanisms. This paper presents a method that integrates physical models with multi-objective optimization for developing an optical angle nano-positioning mechanism. We begin by examining the actual motion law of the mechanism, based on kinematic principles. The outcomes from this kinematic analysis facilitate a static analysis of the flexible hinge, identified as a critical component of the mechanism. Subsequently, we establish a dynamic model for the entire mechanism. By employing the physical model as a base and combining it with the optimization algorithm, we identify the optimal design parameters for the mechanism. The design achieves a resolution of 50 nrad and meets the specified requirements. The first-order inherent frequency of the mechanism is approximately 43.75 Hz. There is a discrepancy of 2.63% from the finite element modal analysis results and a 3.33% difference from the theoretical analysis results, validating the reliability of the design method proposed in this study. [ABSTRACT FROM AUTHOR]

This paper describes a method for recording X-ray diffraction patterns from a small amount of fibrous protein materials while being oriented by using a micro shear-flow cell. This cell consists of two concentrically arranged glass tubes. The inner tube is stationary, while the outer one rotates at a high speed. The gap between the two tubes is about 100 µm, into which the suspension of fibrous protein materials is injected. By using synchrotron-radiation X-ray microbeams (diameter, 10 µm), clear diffraction images from oriented protein materials can be recorded. The required volume of the sample is only about 10 µl. This method can also be combined with the laser-flash photolysis of caged compounds. Examples of application of this method to the flagella of a green alga Chlamydomonas, and sperm of a tunicate Ciona are presented. [ABSTRACT FROM AUTHOR]

Handheld X-ray Fluorescence devices (HH-XRF) have given archaeologists and conservators the opportunity to study a wide range of materials encountered in their work with great accessibility and flexibility. The investigation of copper-based artefacts is a frequent application of these instruments in the field of cultural heritage as it gives direct and rapid quantitative results that can provide very important information about them, such as their fabrication technology. This paper discusses the comparison of quantitative results, obtained by a commercial handheld XRF device "Bruker Tracer 5g" on certified standards, compositionally significant in copper-based alloys of interest in the field of cultural heritage. The measured elemental concentrations were derived using three different calibrations, which were examined for their accuracy. Two of them were based on the empirical coefficients approach, performed by the built-in calibration/software (copper alloy calibrations provided by Bruker manufacturer and the Bruker EasyCal software), while the third one was performed off-line by processing the spectra with an independent fundamental parameters (FP) software (PyMca version 5.9.2., a X-ray fluorescence analysis software developed at the European Synchrotron Radiation Facility). The results highlight that although HH-XRF devices simplify data collection, for optimal quantitative results, the correct choice of analysis conditions and calibration method still requires a detailed understanding of the principles of X-ray spectrometry. [ABSTRACT FROM AUTHOR]

This paper presents an X-ray reflectivity study of a Sc/SiC/Al periodic multilayer deposited via magnetron sputtering and its possible adaptation to be used as a dispersive element in the crystal spectrometers equipping scanning electron microscopes and electron probe microanalyzers. This multilayer is designed for the spectral range of 45–60 eV. The results reveal a reflectance of 40.8% at 54.1 eV for a near-normal incidence angle of 7° with a narrow bandwidth of 2.6 eV. The measured and simulated reflectivity curves are very close, suggesting that this system has smooth interfaces and low interdiffusion. Owing to the growing importance of lithium and lack of spectroscopic data, we simulate a new Sc/SiC/Al stack based on the reflectivity data and optimize it to perform spectroscopy in the range near the Li K absorption edge around 55 eV, which is in the spectral range of the Li Kα emission band. This optimization is achieved by tuning the thicknesses of the different layers and the number of periods of the multilayer using an in-house Python script. The optimization results are compared with the performances of other multilayers employed in the same energy range and at a working angle close to 30° grazing, including Be/Si/Al. This analysis indicates that the Sc/SiC/Al multilayer could be a good candidate for performing spectroscopy in the Li K range. [ABSTRACT FROM AUTHOR]

X-ray phase-contrast micro computed tomography using synchrotron radiation (SR PhC-pCT) offers unique 3D imaging capabilities for visualizing microstructure of the human brain. Its applicability for unstained soft tissue is an area of active research. Acquiring images from a tissue block without needing to section it into thin slices, as required in routine histology, allows for investigating the microstructure in its natural 3D space. This paper presents a detailed step-by- step guideline for imaging unstained human brain tissue at resolutions of a few micrometers with SR PhC-pCT implemented at SYRMEP, the hard X-ray imaging beamline of Elettra, the Italian synchrotron facility. We present examples of how blood vessels and neurons appear in the images acquired with isotropic 5 μιη and 1 μιη voxel sizes. Furthermore, the proposed protocol can be used to investigate important biological substrates such as neuromelanin or corpora amylacea. Their spatial distribution can be studied using specifically tailored segmentation tools that are validated by classical histology methods. In conclusion, SR PhC-pCT using the proposed protocols, including data acquisition and image processing, offers viable means of obtaining information about the anatomy of the human brain at the cellular level in 3D. [ABSTRACT FROM AUTHOR]

Inevitable defects have an important impact on the fatigue lifetime of additive manufacturing materials. Therefore, it is critical to thoroughly characterize the characteristics of the defects, which requires effective semantic segmentation of the imaged defects. In this paper, a defect dataset for SLM Ti-6Al-4V alloy was obtained by synchrotron radiation computed tomography. Then a semantic segmentation method was developed based on the DeepLabV3 + network to automatically extract defects. Cropping and undersampling were introduced in the dataset pre-processing. A weighted scheme based on the ratio between the number of defect and matrix pixels was applied in the classification layer, and morphological operations were employed in image post-processing to improve the accuracy of identifying small-target defect. Finally, the above method was applied to segment the X-ray computed tomography data for two batches of SLM Ti-6Al-4V materials, and the defect segmentation results were used to predict the fatigue lifetime. The semantic segmentation method performs well with a pixel recognition accuracy of 98.2% for the test dataset, and the error in the predicted fatigue lifetime lies within the scatter band of ±2.2. This article is part of the theme issue 'Physics-informed machine learning and its structural integrity applications (Part 2)'. [ABSTRACT FROM AUTHOR]

In this paper we study a self-consistent Vlasov-Fokker-Planck equations which describes the longitudinal dynamics of an electron bunch in the storage ring of a synchrotron particle accelerator. We show existence and uniqueness of global classical solutions under physical hypotheses on the initial data. The proof relies on a mild formulation of the equation and hypoelliptic regularization estimates. We also address the problem of the long-time behavior of solutions. We prove the existence of steady states, called Haissinski solutions, given implicitly by a nonlinear integral equation. When the beam current (i.e. the nonlinearity) is small enough, we show uniqueness of steady state and local asymptotic nonlinear stability of solutions in appropriate weighted Lebesgue spaces. The proof is based on hypocoercivity estimates. Finally, we discuss the physical derivation of the equation and its particular asymmetric interaction potential. [ABSTRACT FROM AUTHOR]

Background Purpose Methods Results Conclusions Phase‐contrast computed tomography (CT) using high‐brilliance, synchrotron‐generated x‐rays enable three‐dimensional (3D) visualization of microanatomical structures within biological specimens, offering exceptionally high‐contrast images of soft tissues. Traditional methods for phase‐contrast CT; however, necessitate a gap between the subject and the x‐ray camera, compromising spatial resolution due to penumbral blurring. Our newly developed technique, Superimposed Wavefront Imaging of Diffraction‐enhanced x‐rays (SWIDeX), leverages a Laue‐case Si angle analyzer affixed to a scintillator to convert x‐rays to visible light, capturing second‐order differential phase contrast images and effectively eliminating the distance to the x‐ray camera. This innovation achieves superior spatial resolution over conventional methods.In this paper, the imaging principle and CT reconstruction algorithm based on SWIDeX are presented in detail and compared with conventional analyzer‐based imaging (ABI). It also shows the physical setup of SWIDeX that provides the resolution preserving second‐order differential images for reconstruction. We compare the spatial resolution and the sensitivity of SWIDeX to conventional ABI.To demonstrate high‐spatial resolution achievable by SWIDeX, the internal structures of four human tissues—ductal carcinoma in situ, normal stomach, normal pancreas, and intraductal papillary mucinous neoplasm of the pancreas—were visualized using an imaging system configured at the Photon Factory's BL14B beamline under the High Energy Accelerator Research Organization (KEK). Each tissue was thinly sliced after imaging, stained with hematoxylin and eosin (H&E) for conventional microscope‐based pathology.A comparison of SWIDeX‐CT and pathological images visually demonstrates the effectiveness of SWIDeX‐CT for biological tissue imaging. SWIDeX could generate clearer 3D images than existing analyzer‐based phase‐contrast methods and accurately delineate tissue structures, as validated against histopathological images.SWIDeX can visualize important 3D structures in biological soft tissue with high spatial resolution and can be an important tool for providing information between the disparate scales of clinical and pathological imaging. [ABSTRACT FROM AUTHOR]

Copyright of Chinese Journal of Inorganic Analytical Chemistry / Zhongguo Wuji Fenxi Huaxue is the property of Beijing Research Institute of Mining & Metallurgy Technology Group and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The validation of laser welding of metallic materials is challenging due to its highly dynamic processes and limited accessibility to the weld. The measurement of process emissions and the processing laser beam are one way to record highly dynamic process phenomena. However, these recordings always take place via the surface of the weld. Phenomena on the inside are only implicitly recognizable in the data and require further processing. To increase the validity of the diagnostic process, the multispectral emission data are synchronized with synchrotron data consisting of in situ high-speed images based on phase contrast videography. The welding process is transilluminated by synchrotron radiation and recorded during execution, providing clear contrasts between solid, liquid, and gaseous material phases. Thus, dynamics of the vapor capillary and the formation of defects such as pores can be recorded with high spatial and temporal resolution of <5 μm and >5 kHz. In this paper, laser welding of copper Cu-ETP and CuSn6 is investigated at the Deutsches Elektronen-Synchrotron (DESY). The synchronization is achieved by leveraging a three-stage deep learning approach. A preprocessing Mask-R-CNN, dimensionality reduction PCA/Autoencoders, and a final LSTM/Transformer stage provide end-to-end defect detection capabilities. Integrated gradients allow for the extraction of correlations between defects and emission data. The novel approach of correlating image and sensor data increases the informative value of the sensor data. It aims to characterize welds based on the sensor data not only according to IO/NIO but also to provide a quantitative description of the defects in the weld. [ABSTRACT FROM AUTHOR]

• XRDCT is used to characterise unique multiphase cultural heritage geomaterials (CHG). • 3D mapping of crystalline phases is carried out non-destructively or non-invasively. • Qualitative/quantitative phase analysis and 3D imaging are simultaneously performed. • Potential and limits of XRDCT for new CHG applications are critically discussed. • New analytical perspectives in the characterisation of heterogeneous CHG are proposed. The present work describes the high potential of the recently developed synchrotron X-ray diffraction computed tomography (XRDCT) for 3D mapping of crystalline and amorphous phases in Geomaterials of Cultural Heritage (CHG). The paper critically discusses the promising results and limitations of XRDCT in Cultural Heritage applications. XRDCT has been applied herein to diverse CHG materials, spanning from archaeological ceramics, and stone conservation treatments to meteorites, at a microscale. Although these materials are very complex systems from a chemical, mineralogical and microstructural point of view, this innovative technique proves effective capability to access the real spatial distribution and semi-quantification of crystallographic phases within materials in a totally non-destructive and/or non-invasive way. [ABSTRACT FROM AUTHOR]

SiC reinforced Al (SiC/Al) composites have outstanding advantages in different fields including aerospace. However, the current mechanical and chemical properties of Al–SiC composites are still not up to expectations because of the problems such as wettability, interface reaction, sintering time and SiC size and distribution. Microwave rapid sintering has a promising prospect for the preparation of high performance Al–SiC, however, the lack of process observation leads to the unclear relationship of energy, microstructure and material properties. Therefore microwave rapid sintering of Al–SiC has not been fully explored and applied. In the present paper, the whole process of Al–SiC microstructure evolution was observed accurately by in situ SR-CT experiment during microwave rapid sintering process. Based on the joint analysis of energy-structure-performance, it was found that the spherical SiC located at the neck of Al particles in the microwave field effectively increased the diffusion rate of Al–SiC samples, which inhibited the growth of grains and the densification process was basically completed in a short time. It was revealed that a region with high electric field strength and uniform distribution formed due to SiC with different structural characteristics, thus achieved the rapid densification of the Al–SiC in microwave sintering. The formation and regulation mechanism of rapid densification of Al–SiC during microwave rapid sintering were researched by the relationship between energy-structure and performance, which would provid more understanding for the preparation of high-performance Al–SiC based on microwave rapid sintering technology, and provide the possibility for the preparation of more functional materials. [ABSTRACT FROM AUTHOR]

This article presents a demonstration of the improved performance of an X‐ray free‐electron laser (FEL) using the optical klystron mechanism and helical undulator configuration, in comparison with the common planar undulator configuration without optical klystron. The demonstration was carried out at Athos, the soft X‐ray beamline of SwissFEL. Athos has variable‐polarization undulators, and small magnetic chicanes placed between every two undulators to fully exploit the optical klystron. It was found that, for wavelengths of 1.24 nm and 3.10 nm, the required length to achieve FEL saturation is reduced by about 35% when using both the optical klystron and helical undulators, with each effect accounting for about half of the improvement. Moreover, it is shown that a helical undulator configuration provides a 20% to 50% higher pulse energy than planar undulators. This work represents an important step towards more compact and high‐power FELs, rendering this key technology more efficient, affordable and accessible to the scientific community. [ABSTRACT FROM AUTHOR]

AbstractBased on finite element analysis, a typical synchrotron radiation front-end high heat load absorber (fixed mask) is thermally analyzed to illustrate the heat transfer paths and thermal release mechanisms. Based on the finite element model, the steady-state and transient thermal analyses are jointly adopted, focusing on obtaining the thermodynamic behavior of the absorber after being illuminated and heated by the synchrotron beam, as well as cooled by thermal convection (including air convection and cooling fluid convection) and thermal radiation. This paper focuses on analyzing the changes to key indexes, such as temperature and thermal stress, of an absorber subjected to high heat load on the timescale. In addition, the contributions of the previously mentioned different thermal heat release modes to the heat release process are also quantitatively analyzed to elaborate the thermal release mechanisms, which can be pretty helpful for guiding the structural optimization design of such types of components. [ABSTRACT FROM AUTHOR]

BL19U1, an energy‐tunable protein complex crystallography beamline at the Shanghai Synchrotron Radiation Facility, has emerged as one of the most productive MX beamlines since opening to the public in July 2015. As of October 2023, it has contributed to over 2000 protein structures deposited in the Protein Data Bank (PDB), resulting in the publication of more than 1000 scientific papers. In response to increasing interest in structure‐based drug design utilizing X‐ray crystallography for fragment library screening, enhancements have been implemented in both hardware and data collection systems on the beamline to optimize efficiency. Hardware upgrades include the transition from MD2 to MD2S for the diffractometer, alongside the installation of a humidity controller featuring a rapid nozzle exchanger. This allows users to opt for either low‐temperature or room‐temperature data collection modes. The control system has been upgraded from Blu‐Ice to MXCuBE3, which supports website‐mode data collection, providing enhanced compatibility and easy expansion with new features. An automated data processing pipeline has also been developed to offer users real‐time feedback on data quality. [ABSTRACT FROM AUTHOR]

The remnant of the historical supernova 1181 is claimed to be associated with a white dwarf merger remnant J005311. The supernova remnant (SNR) shock, and a termination shock expected to be formed by the intense wind of J005311, are potential sites for radio emission via synchrotron emission from shock-accelerated electrons. In this paper, we estimate the radio emission from these two shocks, and find the peak radio flux to be 0.1–10 mJy (at 0.01–1 GHz) in the outer SNR shock and 0.01–0.1 mJy (at 1–10 GHz) in the inner termination shock. We also search for radio emission from this source in the archival data of the Karl G. Jansky Very Large Array (VLA) Sky Survey at 3 GHz, the NRAO VLA Sky Survey at 1.4 GHz and the Canadian Galactic Plane Survey at 408 MHz, finding no significant detection. While targeted observations with higher sensitivity are desired, we particularly encourage those at higher frequency and angular resolution to probe the inner termination shock and its evolution. [ABSTRACT FROM AUTHOR]

This paper presents a method for particle tracing in laboratory X-ray micro-computed tomography (µCT) using an adjusted Random Sample Consensus (RANSAC) algorithm combined with least squares ellipse fitting (LSF). For method testing, a setup for the investigation of deep bed filtration (DBF) has been used as an example of a complex process that can be elucidated with such a method. Particle tracking with tomography systems requires high-temporal resolution which can only be achieved with synchrotron radiation computer tomography. Therefore, in this work, it has been demonstrated that instead of particle tracking, particle tracing in opaque systems such as DBF can be performed in laboratory µCT systems. To achieve particle tracing, dynamic µCT scans with a duration between 30 and 110 s combined with an exposure time of 0.13 s/projection were executed and during the scan time the filtration was performed, causing parabola shaped motion artefacts. The developed method exploits the motion artefacts created by the particle motion during the scan. It could be shown that it is possible to trace particles in complex structures within only one 30 s scan. Furthermore, through trace length and time, it is possible to determine the average velocity. Whereby, the accuracy and limits depend on the particle size, particle velocity/data rate and the X-ray attenuation of particle and medium. Article Highlights: A method for the three-dimensional tracing of particles in porous and opaque media was developed using X-ray microtomography. The method was implemented in a way that it can be used under simple laboratory conditions instead of synchrotron facilities. The method was validated experimentally using opaque geometries of different complexities. [ABSTRACT FROM AUTHOR]

Physical optics simulations for beamlines and experiments allow users to test experiment feasibility and optimize beamline settings ahead of beam time in order to optimize valuable beam time at synchrotron light sources like NSLS-II. Further, such simulations also help to develop and test experimental data processing methods and software in advance. The Synchrotron Radiation Workshop (SRW) software package supports such complex simulations. We demonstrate how recent developments in SRW significantly improve the efficiency of physical optics simulations, such as end-to-end simulations of time-dependent X-ray photon correlation spectroscopy experiments with partially coherent undulator radiation (UR). The molecular dynamics simulation code LAMMPS was chosen to model the sample: a solution of silica nanoparticles in water at room temperature. Real-space distributions of nanoparticles produced by LAMMPS were imported into SRW and used to simulate scattering patterns of partially coherent hard X-ray UR from such a sample at the detector. The partially coherent UR illuminating the sample can be represented by a set of orthogonal coherent modes obtained by simulation of emission and propagation of this radiation through the coherent hard X-ray (CHX) scattering beamline followed by a coherent-mode decomposition. GPU acceleration is added for several key functions of SRW used in propagation from sample to detector, further improving the speed of the calculations. The accuracy of this simulation is benchmarked by comparison with experimental data. [ABSTRACT FROM AUTHOR]

The paper reports on the developed technique for polishing single-crystal silicon substrates using a mechanical lap. The effective substrate roughness was obtained in the spatial frequency range of 0.025–65 µm–1 at the level of 0.37 and 0.18 nm at a frame size on the surface of 2 × 2 µm2. The result obtained is comparable with the results of chemical-mechanical and dynamic polishing of single-crystal silicon wafers for microelectronics. [ABSTRACT FROM AUTHOR]

Additives are one of the important means to improve the performance of perovskite solar cells. To explore the effects of different addition methods on the crystallinity of perovskite, in this paper, guanidine thiocyanate (GASCN) is added in three different methods, i.e., added in SnO2 precursor solution; in PbI2 precursor solution; or FAI precursor solution, respectively. The guanidine hydroiodide (GAI) and methylamine thiocyanate (MASCN) are selected as contrast additives to evaluate the role of GA+ and SCN−. Though the efficiency and stability of the perovskite solar cells with all additives are improved, the systematic study by grazing incidence wide‐angle X‐ray scattering (GIWAXS), quasi‐in situ GIWAXS, and in situ X‐ray diffraction (XRD) proved that the mechanism by the three different addition methods behaved in many different ways, which corresponded, respectively, to the surface of the SnO2 electron transport layer, dominance orientation especially vertical growth of perovskite, or low‐dimensional perovskite structure. This provides a new view for optimizing the appropriate synthesis conditions in the future. [ABSTRACT FROM AUTHOR]

Count-loss characteristics of photon-counting 2D detectors are demonstrated for eight bunch-modes at SPring-8 through Monte Carlo simulations. As an indicator, the effective maximum count rate was introduced to signify the X-ray intensity that the detector can count with a linearity of 1% or better after applying a count-loss correction in each bunch-mode. The effective maximum count rate is revealed to vary depending on the bunch-mode and the intrinsic dead time of the detectors, ranging from 0.012 to 0.916 Mcps (megacounts per second) for a 120 ns dead time, 0.009 to 0.807 Mcps for a 0.5 µs dead time and 0.020 to 0.273 Mcps for a 3 µs intrinsic detector dead time. Even with equal-interval bunch-modes at SPring-8, the effective maximum count rate does not exceed 1 Mcps pixel-1. In other words, to obtain data with a linearity better than 1%, the maximum intensity of X-rays entering the detector should be reduced to 1 Mcps pixel-1 or less, and, in some cases, even lower, depending on the bunch-mode. When applying count-loss correction using optimized dead times tailored to each bunch-mode, the effective maximum count rate exceeds the values above. However, differences in the effective maximum count rate due to bunch-modes persist. Users of photon-counting 2D detectors are encouraged to familiarize themselves with the count-loss characteristics dependent on bunch-mode, and to conduct experiments accordingly. In addition, when designing the time structure of bunch-modes at synchrotron radiation facilities, it is essential to take into account the impact on experiments using photon-counting 2D detectors. [ABSTRACT FROM AUTHOR]

This work is the first attempt to prepare Nd1−xCaxUxPO4 monazite–cheralite with 0 < x ≤ 0.1 by a wet chemistry method. This method relies on the precipitation under hydrothermal conditions (T = 110 °C for four days) of the Nd1−xCaxUxPO4·nH2O rhabdophane precursor, followed by its thermal conversion for 6 h at 1100 °C in air or Ar atmosphere. The optimized synthesis protocol led to the incorporation of U and Ca in the rhabdophane structure. After heating at 1100 °C for 6 h in air, single-phase monazite–cheralite samples were obtained. However, α-UP2O7 was identified as a secondary minor phase in the samples heated under Ar atmosphere. The U speciation in the samples converted in an oxidising atmosphere was carefully characterized using synchrotron radiation by combining HERFD-XANES and XRD. These results showed the presence of a minor secondary phase containing hexavalent uranium and phosphate with a stoichiometry of U : P = 0.78. This highly labile uranyl phosphate phase incorporated 21 mol% of the uranium initially precipitated with the rhabdophane precursor. This phase was completely removed by a washing protocol. Thus, single-phase monazite–cheralite was obtained through the wet chemistry route described in this work with a maximum U loading of x = 0.08. [ABSTRACT FROM AUTHOR]

The paper presents experimental studies on laser cladding synthesis of a titanium matrix composite based on Ti64 titanium alloy and TiB2 ceramic reinforcement. The weight percentage of TiB2 ceramics in the composite was 5, 10 and 15%. The phase composition of the resulting materials was analyzed by standard X-ray diffraction and synchrotron X-ray diffraction. It was found that the structure of the titanium matrix composite with 5 wt % ceramics consists of TiB nanowhiskers, and that of samples with higher ceramic content exhibits TiB whiskers with a width of several micrometers. The addition of TiB2 ceramics increases Young's modulus, nano- and microhardness of composite samples compared to Ti64 alloy. The indentation method was used to study the formation of a phase that is different from TiB2 ceramics and TiB microwhiskers and has elastic properties exceeding the elastic properties of the original Ti64 matrix phase. Analytical predictions showed an increase in the effective elastic properties of the formed heterogeneous material with the predicted new phase. It was also found that a lower friction coefficient can be achieved by forming a structure with nanowhiskers, while higher Young's modulus and microhardness can be obtained by forming a structure with microwhiskers. [ABSTRACT FROM AUTHOR]

Ag2S nanoparticles (NPs) are attractive materials for wide application in catalysis, solar cells, and energy storage, owing to their low toxicity, tunable electronic properties, narrow bandgap, and light emission. However, in situ and operando studies are required for a deeper understanding of the crystallisation pathways that govern their structural-related properties and changes during operation, for example, during galvanostatic discharge–charge (GDC) in sodium-ion batteries (SIBs), to improve their cycling performance. This work presents new strategies for the synthesis of α-Ag2S NPs applying aqueous or polyol-assisted methods, and using double- or single-source based approaches. Double-source polyol synthesis was used to demonstrate the effect of reaction time, capping agent, and reaction temperature on the Ag2S particle size. Insights into Ag2S formation processes were obtained by in situ analysis of changes in turbidity and of infrared or UV/vis transmittance spectroscopy, in addition to synchrotron-based X-ray diffraction. After testing the application of Ag2S NPs as SIB electrodes, a proof-of-principle experiment is presented, demonstrating the feasibility of measuring operando luminescence spectra to monitor changes in the electrode structure during GDC cycling. The in situ results showed the influence of synthesis parameters on the nucleation process, resulting in compact and hollow NPs of ∼5–400 nm. Ag2S NPs showed an initial capacity of 520 mA h g−1 in SIBs. Despite an expected large capacity loss due to e.g. the solid electrolyte interphase (SEI) formation, the capacity was found to be stable, and operando luminescence measurements indicated the formation of Na(Ag3S2) and elemental Ag during cycling. Since several battery-electrode materials are optically active, operando luminescence measurements during cycling significantly impact the monitoring of structural changes owing to their high availability and independence from synchrotron radiation. [ABSTRACT FROM AUTHOR]

The presence of cracks in the gas diffusion layer (GDL) can have a significant impact on the flow of two phases within Proton Exchange Membrane Fuel Cells (PEMFCs). This study focuses on investigating the transport process of two-phases flow in a GDL sample using both experimental and numerical methods. The porous structure of a hydrophobic carbon paper, serving as the macro-porous substrate (MPS) of the GDL, is examined using synchrotron radiation X-ray phase contrast Computed Tomography (CT). A 3-D model with various crack geometries is then created, and a Lattice Boltzmann Method (LBM) simulation is employed to analyze the flow behavior within the GDL model. The findings reveal that the water intrusion mode in the MPS primarily depends on its hydrophobic nature, but the width and depth of the cracks also significantly influence both the rate and path of water intrusion. Increasing the crack width from 7 μm to 28 μm results in a 30% increment in water intrusion rate, while the intrusion path remains unchanged. However, when the crack width reaches 42 μm, the crack itself becomes the primary path for water intrusion, doubling the intrusion rate. Furthermore, an increase in crack depth leads to a higher invasion rate of the liquid phase, consequently increasing the liquid storage volume within the GDL. This research provides a novel approach for analyzing cracked GDLs and demonstrates the potential to optimize the water management process of PEMFCs through GDL microstructure design. • A 3D model of gas diffusion layer (GDL) in PEMFC is obtained via Synchrotron X-ray phase contrast CT. • Lattice Boltzmann Method is applied to investigate GDL cracking phenomenon. • The two-phase transport process in the cracked GDL is analyzed. • The effect of the crack geometric features on the GDL performance is investigated. [ABSTRACT FROM AUTHOR]

The paper studies physical and mechanical properties of multicomponent (Zr+TiBSiNi)N coating synthesized by vacuum-arc deposition using the traditional plasma-assisted gas source "PINK" and new beam-plasma formation (BPF) system. It is shown that the coating obtained by using the BPF system, has better properties that the coating obtained by using the traditional plasma-assisted gas source. In the first case, the coating hardness is 47.8 GPA and in the second case, it is 40.9 GPa. The X-ray diffraction analysis shows that along with ZrN and TiN phases, the BPF-synthesized coating consists of the superhard and heat-resistant TiB2 phase. The X-ray diffraction analysis of the phase composition conducted for the in situ synchrotron radiation beam, shows that notable phase transformations start at temperatures higher than 750°C. [ABSTRACT FROM AUTHOR]

This paper accurately predicts and quantifies the vibration response characteristics of a mirror bender system with the finite element simulation and experiment. The results show that the fundamental frequency of the roll angle vibration is 24.66 Hz, and the fundamental frequency of the pitch angle vibration is 116.21 Hz. The overall error is within 11.15% in comparision with the first six natural frequencies obtained from experiments and simulations. The vertical support rod, being one of the weakest links in the overall structural stiffness, is a crucial factor limiting the increase in the natural frequency of the mirror system. Before and after the injection of cooling water, the pitch angle vibration was 123.63 and 199.04 nrad, respectively. An increase in the cooling water flow rate from 1 to 1.5 l/min has almost no effect on pitch angle vibrations. This study provides references and guidance for improving the stability of the mirror system. [ABSTRACT FROM AUTHOR]