Search

This paper presents a compact, novel, quad patch and triple band single substrate microstrip patch antenna for 5G/6G mm wave applications. The aim is to design an antenna within the K-band with three resonance frequencies at 24, 29, and 34 GHz. The antenna is designed on a volumetric dimension of 11×12.7×1.6 mm³. The substrate used is FR4 (dielectric constant 4.4), having a loss tangent of 0.0022. A microstrip line of width 1 mm for a 50 O impedance line is used to match with the load antenna, which has four rectangular connected patches. Patch dimensions come from standard antenna equations and simulation done on Ansys High-Frequency Structure Simulator software. Validation of simulated results is done through measurements on the prototype antenna. A substantial good agreement is found between the simulated and measured results. The gain of the proposed antenna is 6.16 dBi, with return loss being ≨-10 dB. Bandwidths are 1.1 GHz (23.8 - 24.9 GHz), 0.9 GHz (28.6 - 29.5 GHz), and 0.8 GHz (33.7 - 34.5 GHz), respectively. The far-field radiation characteristics of both E-plane and H-plane are also reported. The proposed design is suitable for mm wave applications, including smart vehicles, global positioning systems, radio frequency identifications, etc. [ABSTRACT FROM AUTHOR]

This work explains the design and development of a small, wide-ranging antenna for millimeter wave (mm-Wave) and 5G technology and their applications, along with the configuration to set up as a multiple-input multiple-output (MIMO) system. Rogers RT/duroid 5880 substrate material, which has a height of 1.575 mm, is used for fabricating the antenna. It possesses a compact overall size of 36 × 36 mm2. The design process began with the creation of a octagonal conventional mm-wave microstrip antenna. Subsequently, the impedance bandwidth was enhanced by incorporating the slots of rectangular shape on either parallel edges to the patch feed enabling it to perform over a larger bandwidth ranging between 25 GHz to 32 GHz. Moreover, a new metasurface and a structure shaped like a swastika are positioned between the 2 × 2 arrangement to minimize mutual coupling. The suggested MIMO antenna provides a wide frequency range, significant gain, minimal interference between antennas, and a low correlation between signal envelopes while also achieving a high level of diversity gain. Furthermore, the proposed study has been compared to similar works to demonstrate the significance of the proposed research. [ABSTRACT FROM AUTHOR]

In this article, a compact dual-band quad-port Multiple Input Multiple Output (MIMO) Rectangular Dielectric Resonator Antenna (RDRA) with a defected connected ground Geometry (DCGG) for 5G millimeter-wave (mm-wave) application is presented. The antenna is operating at 24 GHz to 32 GHz frequency range. The antenna configuration comprises four identical rectangular microstrip radiators mounted on an RT Duroid 5880 substrate (20 × 20 × 0.254) mm3. To enhance bandwidth, each radiator is equipped with both rectangular and circular-shaped ring slots. To improve the performance of the 4 port MIMO antenna, RDRAs are placed over each radiator and optimized. The MIMO RDRs exhibit dual-band with 4.24 GHz and 0.46 GHz bandwidths. The MIMO RDRA achieves exceptional isolation (>27 dB), high gain (8.24 dB), and more than 94 % radiation efficiency. The diversity parameters exhibit a low Envelope Correlation Coefficient (ECC) of 0.0006, and a high Diversity Gain (DG) of 9.97 dB is achieved, highlighting the effectiveness of the antenna system in providing diversity reception and improving communication reliability in challenging environments. Hence, the proposed MIMO antenna is compact, making it suitable for integration into small 5G devices or systems where space is limited, such as IoT devices, mobile phones, or small base stations at mm-wave frequency bands. [ABSTRACT FROM AUTHOR]

Summary: A novel antenna system that utilizes multiple‐input and multiple‐output (MIMO) technology to suit the requirements of 5G applications is proposed in this article. The antenna has a wide operating bandwidth and high isolation in n257/n258/n261 5G bands. The suggested arc‐shaped MIMO antenna is composed of four similar patch units with modified ground planes arranged in a four‐port configuration and is made on a Rogers RT/duroid 5880 substrate, which measures 31.891 × 37.5885 × 0.508 mm3. The prototype of the suggested MIMO antenna is realized to confirm the obtained simulated results and validate the proposed design. The four‐port MIMO antenna features a broad frequency range of 7.3 GHz from 21.8 to 29.1 GHz, a peak gain of 5.76 dBi at 29 GHz, and a good isolation less than −18 dB. The proposed antenna's MIMO performance is evaluated by analyzing several diversity parameters. The findings of the evaluation demonstrate an envelope correlation coefficient (ECC) value of less than 0.001, a diversity gain (DG) value exceeding 9.995 dB, and an average mean effective gain (MEG) of −3 dB within the operational frequency band. The suggested MIMO antenna's compact size and impressive performance make it a suitable choice for intended n257/n258/n261 5G NR networks. [ABSTRACT FROM AUTHOR]