Search

This article aims at designing a robust wide-area damping controller (WADC) to address the problems associated with communication failures. The proposed controller is a state feedback-based controller, which uses generators' states as the controller inputs. The structure of the proposed controller's feedback gain matrix is a combination of two feedback gain matrices to achieve adequate robust performance over different disturbances and communication losses. These two feedback gain matrices are; full-scale feedback gain matrix and decentralized scale feedback gain matrix. Both models are designed by considering all generators' states are available at the controller input side. However, both matrices' structures are different from each other. The conventional LQR state feedback control technique is used to design the full-scale matrix. On the other hand, the decentralized scale matrix is computed using a structurally constrained H 2 -norm optimization technique to acquire the required structure. The full-scale model gives robust performance under different faults. Whereas, the decentralized scale matrix will result robust performance against communication failures. Therefore, to achieve superior performance under all conditions, the proposed controller can be used. To show the efficacy of the proposed controller, it is compared with different existing controllers and the results are illustrated. Simulation studies are conducted on well-known IEEE 39-bus and 68-bus test systems to validate the robustness of the proposed controller considering different faults and communication failures. [ABSTRACT FROM AUTHOR]

In this paper, the vibration control of the multivariable model of rotor bearing systems is considered for investigation. Some simply structured controllers that can suppress vibrational disturbances are tested for their robustness via the H∞ optimality criteria. Initially, intelligent optimisation techniques are used to minimize the H∞ mixed-sensitivity norm of the Linear Fractional Transformation (LFT) of the simple two-term PI controllers acting on the rotor system models. This results in some controllers that can suppress the vibration but with a slow oscillatory response. After this, an appropriate interpretation of the Bode plot singular values of the combined sensitivity and control effort matrix is used to explain the performance shortcomings of this controller. Moreover, the existing simply structured controllers in the literature exhibiting a faster performance are examined by using singular value plots. It is shown that when the maximum singular value of the control effort matrix drops below the 0 db line, the performance will be boosted. Finally, the H∞ controllers are designed by using the robust control toolbox in MATLAB. This resulted in rapid disturbance rejection, with the vibration amplitude diminishing to zero after 0.3 s due to double-step disturbances. However, these controllers in the frequency domain have an order of eight and may not be realizable to be implemented in practice. It is concluded that examining the Bode plot of the maximum singular value of the control effort matrix is a useful tool for evaluating performance in the frequency domain. However, designing robust controllers by toolboxes in the time domain can lead to superb performance with higher-order controllers. [ABSTRACT FROM AUTHOR]