Search

This paper investigates the nonlinear free vibration of spinning pre-twisted functionally graded material (FGM) plates in thermal environment. Based on the Kirchhoff plate theory and von Kármán large-deformation theory, the nonlinear dynamic model is established via the Lagrange equation, where the warping effect is taken into account. The material properties are related to temperature and change according to a power-law exponent distribution. The theoretical solution of nonlinear-free vibration is obtained using the multiple scale method. The effects of power-law exponent, temperature difference, spinning speed, hub radius ratio, and twist angle on nonlinear-free vibration characteristics of the spinning pre-twisted cantilever FGM plates are discussed. The results show that the spinning pre-twisted cantilever FGM plate exhibits nonlinear hardening-spring vibration behavior, while the characteristics weaken with the increase of spinning speed. The twist angle and setting angle have coupling effects on the nonlinear vibration characteristics of spinning pre-twisted FGM plates. [ABSTRACT FROM AUTHOR]

For three-dimensional (3-D) vibration suppression of flexible beams, the most commonly used method is the boundary-controlled strategy, which is challenging to employ in general environments. In this study, a novel strategy by employing planned-motion flywheel assembly is designed to suppress 3-D vibration of flexible beams, which is easier to implement and more widely applicable than the boundary-controlled strategy. First, the dynamic equations of flexible beams with flywheel assembly are derived based on the Lagrange equation, where the Euler-Bernoulli beam theory and the geometric nonlinearity are employed. Subsequently, the phase delay method is employed to plan the motion of the flywheel assembly, while the optimal parameters in the expressions of flywheel assembly's motion are derived through the analysis of system energy. Theoretical results suggest that the flywheel assembly with planned motion enables the beam stable rapidly in free vibration and decreases displacement in forced vibration. Experimental results also demonstrate this strategy can enable the beam stable rapidly in free vibration under various initial conditions. The proposed control strategy can provide effective 3-D vibration suppression in flexible beams. [ABSTRACT FROM AUTHOR]

• Dynamic model of shaft-disk rotors in axial non-uniform temperature field is developed. • Three-dimensional displacement fields for both shaft and disk are considered. • Temperature-dependent material properties are considered. • Present model can effectively predict vibrations of shaft-disk rotors in axial non-uniform temperature field. • Effect of non-uniform temperature field is related to the rotational speed and disk location. Research on vibrations of shaft-disk rotors in non-uniform thermal field is essential for the design of rotating machinery. In this paper, the dynamic model of axially loaded thin-walled shaft-disk rotors in axial non-uniform temperature field is developed, considering three-dimensional displacement fields of the shaft and disk. This model introduces the temperature-dependent properties of materials, and gyroscopic and centrifugal effects. Based on the Euler-Bernoulli beam theory and the Kirchhoff plate theory, Lagrange's equation is used to derive the differential equations of motion. By comparing with the results of the existing reference and finite element results, the accuracy of the present model is verified. The effects of the axial displacement of shaft, temperature-dependent material property, temperature difference, temperature distribution, disk position and axial preload on the free vibration of shaft-disk rotors are discussed. Results show that the present model can effectively predict free vibrations of shaft-disk rotors in axial non-uniform temperature field. The effect of thermal field on vibrations of shaft-disk rotors is affected by the rotational speed and disk location as well. [ABSTRACT FROM AUTHOR]