Search

In the present study, silver nanoparticles were synthesized via green synthesis using fenugreek (Trigonella foenum‐graecum L.) seeds of variety HM 425. The AgNPs were characterized by using UV‐Visible spectroscopy, Particle size analyzer, Field emission scanning electron microscopy coupled to Energy dispersive X‐ray spectroscopy, XRD, High resolution transmission electron microscopy and Fourier Transform Infrared Spectroscopy. The AgNPs were spherical and had an average particle size of 28 nm. The reduction of cationic dyes Methylene blue, Rhodamine B, and an anionic azo dye Methyl Orange by Sodium borohydride was used as a model reaction to investigate the catalytic ability of AgNPs. The results demonstrated an efficient catalytic dye degradation of methylene blue (95.81 %, 25 min, 0.1737±0.01 min−1), Rhodamine B (90.23 %, 15 min, 0.1388±0.01 min−1) and methyl orange (83.63 %, 39 min, 0.0412±0.002 min−1). The synthesized AgNPs had an excellent detection limit of 12.50 μM for Hg2+, making them excellent solid bio‐based sensors for mercury sensing. [ABSTRACT FROM AUTHOR]

In the present study, silver nanoparticles were synthesized via green synthesis using fenugreek (Trigonella foenum‐graecum L.) seeds of variety HM 425. The AgNPs were characterized by using UV‐Visible spectroscopy, Particle size analyzer, Field emission scanning electron microscopy coupled to Energy dispersive X‐ray spectroscopy, XRD, High resolution transmission electron microscopy and Fourier Transform Infrared Spectroscopy. The AgNPs were spherical and had an average particle size of 28 nm. The reduction of cationic dyes Methylene blue, Rhodamine B, and an anionic azo dye Methyl Orange by Sodium borohydride was used as a model reaction to investigate the catalytic ability of AgNPs. The results demonstrated an efficient catalytic dye degradation of methylene blue (95.81 %, 25 min, 0.1737±0.01 min−1), Rhodamine B (90.23 %, 15 min, 0.1388±0.01 min−1) and methyl orange (83.63 %, 39 min, 0.0412±0.002 min−1). The synthesized AgNPs had an excellent detection limit of 12.50 μM for Hg2+, making them excellent solid bio‐based sensors for mercury sensing. [ABSTRACT FROM AUTHOR]

Polyaniline‐potassium doped nickel oxide nanocomposites (PANI/KNO) were efficiently synthesized via an in situ chemical oxidation method, meticulously confirmed by comprehensive x‐ray diffraction, Fourier transformation infrared spectroscopy, energy dispersive x‐ray spectroscopy, selected area electron diffraction, and x‐ray photoelectron spectroscopy analyses. The crystallite size and strain exhibited distinct behaviors, while field emission scanning electron microscopy revealed a blend of irregular spherical shapes and nanofibers, further confirmed by high resolution transmission electron microscopy. These composites exhibited significantly enhanced thermal stability, surpassing PANI by 1.39 times, and showcased a band gap exceeding 3 eV, along with multiple photoluminescence peaks at room temperature (RT). Moreover, their RT AC conductivity experienced a remarkable surge by 4.91 times compared to pure polyaniline. Jonscher's Power Law model and the Havriliak–Negami relaxation model are employed to elucidate the electrical properties of composite materials. The composites displayed nonDebye relaxation behavior with increased conductivity, as observed through impedance analysis, electrical modulus evaluation, and dielectric constant assessment. Additionally, evident superparamagnetic properties and multiple magnetic domains further contributed to their effectiveness. The PANI/KNO composite demonstrated photocatalytic efficiency, achieving over 90% degradation of methylene blue dye across four cycles, thus highlighting its superior photostability. Furthermore, investigations into its response to pH variations and scavenger activity underscored its immense potential for highly effective photocatalytic applications. [ABSTRACT FROM AUTHOR]

Biodiesel has recently emerged as a renewable and environmentally benign fuel substitute for fossil‐derived energy sources. The use of heterogeneous solid catalysts for the generation of biodiesel from biomass‐derived fats and oils is sustainable. Among various reported catalyst supports, metal–organic frameworks (MOFs) have been popular choices for enhancing catalytic activity for biodiesel synthesis because of several outstanding features including porosity, high surface area, adjustable structures, and uniform pore sizes. In this research, the authors synthesized a novel nanocomposite of MOF‐supported hydroxyapatite (UiO‐66@HAp) using a facile impregnation technique and the characterization of the as‐synthesized catalyst was performed by different spectroscopic methods including powder X‐ray diffraction (PXRD), Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), field emission gun‐scanning electron microscope (FEG‐SEM), energy dispersive X‐ray spectroscopy (EDS), high resolution transmission electron microscopy (HR‐TEM), thermogravimetric analysis (TGA), and N2 adsorption–desorption techniques. After successful synthesis, the catalytic property of the prepared material was evaluated in the palm oil transesterification into biodiesel. Product formation was confirmed by the 1H nuclear magnetic resonance (NMR) spectroscopy, 13C NMR, FTIR, and gas chromatography–mass spectrometry (GC–MS) of the biodiesel. The influence of different reaction variables such as catalyst dosage, methanol/oil molar ratio, temperature of the reaction, and reaction time was also studied. The outcomes revealed that the maximum biodiesel yield (∼97%) was obtained when 6 wt% catalyst was used with a 6:1 ratio of methanol/oil at 70 °C for 1 h. It was also observed that, even after 5 cycles of reuse, the catalyst was capable of producing significant amounts of biodiesel (over 90%). The results suggest that the synthesized novel catalyst holds a promising future in the sustainable production of biodiesel. [ABSTRACT FROM AUTHOR]

β-Bi 2 O 3 and Ni-incorporated β-Bi 2 O 3 nanoparticles with different Ni incorporating amounts (0, 2, and 4 at. wt. %) were successfully synthesized through a viable hydrothermal process. As-synthesized nanoparticles were analyzed by complementary analytical tools such as X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS), UV–visible spectroscopy (UV–Vis), and photoluminescence spectroscopy (PL) for structural, microstructural, compositional, and spectral properties. The photocatalytic performance of synthesized nanoparticles was assessed by subjecting them to visible light irradiation and monitoring the decomposition of rhodamine-B dye. The findings demonstrated that the inclusion of Ni(4%) in β-Bi 2 O 3 nanoparticles significantly enhanced its photocatalytic activity compared to pristine β-Bi 2 O 3 which is desirable for environmental remediation. This improvement may be caused by increased generation of electron-hole (e−-h+) pairs, reduced recombination rate of these pairs, enhanced absorption of visible light, and a decreased band gap energy. To evaluate the specific capacitance characteristics of synthesized electrode materials, cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance analyses were conducted. The super capacitance activities of prepared electrode materials were observed in the order of Bi 2 O 3 < Ni(2%)-Bi 2 O 3 < Ni(4%)-Bi 2 O 3. Notably, Ni(4%)-Bi 2 O 3 nanocomposite exhibited higher supercapacitance, which can be attributed to the effective role of appropriate nickel incorporation in Bi 2 O 3. These results suggested that the incorporation of Ni(4%) into β-Bi 2 O 3 to form a nanocomposite showed greater capability as an effective electrode material for advanced energy storage devices, especially supercapacitors. Ni (0,2,4%) incorporated-Bi 2 O 3 nanoparticles were successfully synthesized and characterized through viable techniques. Ni (4%)- Bi 2 O 3 nanoparticles have shown enhanced visible light driven photocatalytic activity against organic dyes for environmental remediation. It also exhibited high supercapacitance desirable for high capacity electrode material employable in supercapacitors. [Display omitted] • Ag NPs-loaded brookite TiO 2 NWs supported on rGO sheets were produced hydrothermally. • Structure and morphology were evaluated by XRD, XPS and SEM/TEM. • Ag–TiO 2 /rGO nanohybrid exhibited an excellent light induced photocatalytic performance. • A suitable schematic mechanism was proposed for photocatalytic degradation of dye. • Ag–TiO 2 /rGO nanohybrid demonstrated fairly high electrochemical electrode material characteristics. [ABSTRACT FROM AUTHOR]

High manganese steel is influenced by the combined effects of corrosion and wear during service under specific conditions, resulting in components with shortened service life. Under harsh service environments, newly developed Cr+N alloyed austenitic high manganese steel (Mn18Cr7C0.6N0.2 steel) as a new type of railway steel has shown promising results. Herein, the tribocorrosion behaviors of Mn18Cr7C0.6N0.2 and Mn13C1.1 steels in artificial acid rain were studied using electrochemical methods, field emission scanning electron microscope (FE-SEM), focused ion beam scanning electron microscopy (FIB-SEM), scanning transmission electron microscopemicroscopy energy dispersive X-ray spectroscopy (STEM-EDS), and high resolution transmission electron microscopy (HR-TEM). The results showed the formation of passive film and gradient-nanostructure on surfaces of both test steels during tribocorrosion. A dense and tightly adhering amorphous passive film was formed on Mn18Cr7C0.6N0.2 steel surface with a superior blocking effect toward invasive ions. The high strain resistance and plasticity of the Mn18Cr7C0.6N0.2 steel resulted in an intact gradient-nanostructure, suitable for obtaining high surface hardness and maintaining the toughness of the matrix, contribute to providing high wear resistance. The oxide film on the Mn13C1.1 steel surface comprised crystal α-FeOOH. Vortex cracks formed in its gradient structure due to strain localization. Meanwhile, the relatively poor corrosion protection ability and vortex cracks of its gradient-nanostructure prevented it from maintaining interface integrity of the gradient nanostructure, resulting in inferior tribocorrosion resistance. In artificial acid rain, the new type of Cr+N alloyed Mn18Cr7C0.6N0.2 steel exhibited higher tribocorrosion resistance than traditional high manganese steel, promising for use as an excellent wear-resistant material under corrosive environments. • An amorphous passive film formed on the surface of Cr+N alloyed high-Mn steel. • The gradient-nanostructure of Cr+N alloyed high-Mn steel maintained integrity. • Vortex cracks formed in the gradient-nanostructure of traditional high-Mn steel. • Gradient-nanostructure and passive film determined the tribocorrosion resistance. • The surface layer and passive film were fully observed by FIB and TEM. [ABSTRACT FROM AUTHOR]

Owing to the combination of good thermo-optical properties and inhomogeneously broadened fluorescence spectra suitable for ultrashort laser pulse generation, rare-earth doped solid solutions of sesquioxides (Y,Lu,Sc) 2 O 3 have attracted considerable interest in recent years. In this study, compositionally disordered Tm3+-doped YScO 3 transparent ceramic was fabricated using solid-state vacuum sintering of nanopowder produced using laser ablation of solid target in air flow. The as-synthesized powder consisted of weakly aggregated spherical particles having 20 nm diameter and a mostly monoclinic (space group C 2/ m) crystal structure, whose symmetry was transformed into cubic (space group Ia -3) by calcination at 1050 °C. From high resolution transmission electron microscopy (HRTEM) and energy dispersive X-ray analysis (EDX), we observed a homogeneous distribution of components both throughout individual nanoparticles and 100-nm-thick ceramic foil resulting in high structural and optical quality of the obtained samples. The sintered ceramic featured an optical transmission of 77% at 600 nm and above 81% near 2 μm, an average grain size of 24.2 μm and a content of scattering centers of 26.1 ppm. The absorption spectra at several temperatures, from 93 K to 293 K, were measured and the corresponding absorption coefficients were obtained by Lambert-Beer formula in the range from 600 nm to 900 nm and from 1400 nm to 2100 nm. In particular, the room temperature absorption cross section at 794 nm and 1634 nm were determined to be σ abs = 4.25 × 10−21 cm2 and σ abs = 5.01 × 10−21 cm2 respectively. Concerning the emission cross section it was calculated by Fuchtbauer-Ladenburg equation starting from the fluorescence spectrum acquired at the laser work temperature: at 1951 nm and 2106 nm corresponding to the main two emission peaks belonging the curve, it was found σ em = 9.2 × 10−21 cm2 and σ em = 4.9 × 10−21 cm2, respectively. Finally, it was tested the laser behavior of the ceramic: pumped at 793 nm in quasi -CW mode it delivered 1.27 W of output power with a slope efficiency of 10.33% at 2081 nm. The tunability curve spans from 1942 nm to 2110 nm (i. e. 168 nm). • Tm 0.05 (Y 0.5 Sc 0.5) 1.95 O 3 laser ceramic. • Solid-state vacuum sintering from laser-ablated (Tm,Y,Sc) 2 O 3 nanoparticles. • Tm-based laser with emission peak at 2081 nm. • Broad laser wavelength tuning range (from 1942 nm to 2110 nm). [ABSTRACT FROM AUTHOR]

Methyl orange (MO), which is known as a highly durable dye that is extremely toxic to humans and animals, has been processed by using various methods. In recent years, MO degradation through reduction in the presence of NaBH 4 (NB) and suitable nanocatalyst have garnered considerable interest. However, the nanosized particles of the catalyst make separation from the liquid solution more difficult and limit the practical application of this technique. Herein, copper nanoparticles (CuNPs) decorated on three-dimensional chitosan aerogel (CSA) were synthesized as a reusable composite for the catalytic degradation of MO by using a green method with durian (Durio zibethinus) shell (DS) extract as a reducing agent. The Cu/CSA composite's physicochemical properties were characterized by using X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscopy- energy dispersive X-ray spectroscopy (SEM-EDS), high resolution Transmission electron microscopy (HR-TEM), Brunauer-Emmett-Teller (BET) and Raman spectroscopy. These modern techniques elucidated the structure and formation of copper nanoparticles on the CSA surface. The copper nanocatalysts have an average particle size of 32.6 nm, specific surface area of 55.8 m2/g, pore size of 32 Å and pore area of 0.049 cm3/g. Through the investigation of catalyst activity, the conditions of MO reduction were optimised with the 1.0 Cu/CSA sample, catalyst dose of 0.5 g/L and a molar ratio of MO/NB of 1/200. The reaction reached over 94.3% efficiency after 10 min, correlating with a kinetic rate constant of 0.163 min−1. It is worth mentioning that the optimized catalyst can be conveniently synthesized and retrieved from the reaction solution in just 5 s using a vacuum filter. Furthermore, its effectiveness remains largely unaffected even after undergoing five cycles of reuse, thus demonstrating its exceptional durability and potential in environmental remediation. [Display omitted] • An alternative chitosan aerogel-based support for metal nanoparticles. • Nano-copper/chitosan aerogel (Cu/CSA): a benign reduction using durian shell extract. • Outstanding reactivity of Cu/CSA in the catalytic reduction of methyl orange. • High stability and proficient reusability of Cu/CSA during 5 consecutive cycles. [ABSTRACT FROM AUTHOR]

Silver nanoparticles (AgNPs) by green synthesis from fungi polysaccharides are attracting increasing attention owing to their distinctive features and special applications in numerous fields. In this study, a cost-effective and environmentally friendly biosynthesizing AgNPs method with no toxic chemicals involved from the fruiting body polysaccharide of Phlebopus portentosus (PPP) was established and optimized by single factor experiment and response surface methodology. The optimum synthesis conditions of polysaccharide-AgNPs (PPP-AgNPs) were identified to be the reaction time of 140 min, reaction temperature of 94 °C, and the PPP: AgNO 3 ratio of 1:11.5. Formation of PPP-AgNPs was indicated by visual detection of colour change from yellowish to yellowish brown. PPP-AgNPs were characterized by different methods and further evaluated for biological activities. That the Ultraviolet-visible (UV–Vis.) spectroscopy displayed a sharp absorption peak at 420 nm confirmed the formation of AgNPs. Fourier transform infrared (FTIR) analysis detected the presence of various functional groups. The lattice indices of (111), (200), (220), and (331), which indicated a faced-centered-cubic of the Ag crystal structure of PPP-AgNPs, was confirmed by X-ray diffraction (XRD) and the particles were found to be spherical through high resolution transmission electron microscopy (HRTEM). Energy dispersive X-ray spectroscopy (EDS) determined the presence of silver in PPP-AgNPs. The percentage relative composition of elements was determined as silver (Ag) 82.5 % and oxygen (O) 17.5 % for PPP-AgNPs, and did not exhibit any nitrogen peaks. The specific surface area of PPP-AgNPs was calculated to be 0.5750 m2/g with an average pore size of 24.33 nm by BET analysis. The zeta potential was −4.32 mV, which confirmed the stability and an average particle size of 64.5 nm was calculated through dynamic light scattering (DLS). PPP-AgNPs exhibited significant free radical scavenging activity against DPPH with an IC 50 value of 0.1082 mg/mL. The MIC values of PPP-AgNPs for E. coli , S. aureus , C. albicans , C. glabrata , and C. parapsilosis are 0.05 mg/mL. The IC 50 value of the inhibition of PPP-AgNPs against α -glucosidase was 11.1 μg/mL, while the IC 50 values of PPP-AgNPs against HepG2 and MDA-MB-231 cell lines were calculated to be 14.36 ± 0.43 μg/mL and 40.05 ± 2.71 μg/mL, respectively. According to the evaluation, it can be concluded that these green-synthesized and eco-friendly PPP-AgNPs are helpful to improve therapeutics because of significant antioxidant, antimicrobial, antidiabetic, and anticancer properties to provide new possibilities for clinic applications. [Display omitted] [ABSTRACT FROM AUTHOR]