Search

Aiming at the difficulty of dynamic modeling of a hybrid robotic arm, a dynamic model system of industrial robotic arm based on Simscape Multibody was established with the MG400 robotic arm as the research object, which combines the motion control and data acquisition modules. The model is dynamically visualized and provides a convenient platform for studying the control algorithm of the robot arm. In response to the issues of sluggish speed and substantial position error in robot trajectory tracking control of a traditional controller, a variable gain iterative learning control methodology was designed. The robot arm control system model was employed to corroborate the trajectory tracking control under the stipulated target trajectory. The empirical outcomes indicate that in comparison to the traditional controller and the fixed-gain iterative learning controller, the variable-gain iterative learning controller can regulate the robot end trajectory more precisely, with swift tracking speed and accurate tracking posture, demonstrating commendable feasibility and portability. It offers an open-source research and development platform for the dynamic modeling of robot arm and a potent solution for the control strategy of robot arm. [ABSTRACT FROM AUTHOR]

This article presents the conceptual design, operation principle, dynamic modeling, and simulation results of a discrete incremental hydraulic positioning system (DIHPS) intended for use in high-precision, heavy-load industrial automation solutions. An original solution for precise incremental step positioning using DIHPS is proposed, comprising an n-step linear double-acting hydraulic actuator (HA) with a double rod, cylinder sleeve with outflow gaps, binary valves (BVs) bleed-off into the tank, and fixed throttle valves (TRVs) at the inlets of the actuator chambers. The discrete incremental shift of the HA is determined by controlling the opening and closing of the individual BVs, and the step shift of the HA piston stops at the opening location of the BV. A dynamic model of incremental step shift for DIHPS is developed, considering the behavior and relationships of its individual elements. A dynamic model of HA with and without a hydropneumatic accumulator (HPA) is presented. HPA has been shown to effectively dampen piston vibrations and pressure peaks at the HA stop position. The design assumptions, dynamic models, and discrete incremental positioning of the DIHPS are verified by simulation tests and assessed with quantitative indicators. Innovative DIHPSs have significant practical potential in the discrete incremental positioning of heavy loads. [ABSTRACT FROM AUTHOR]

This paper analyzes the dynamic character of a planar multi-degree-of-freedom industrial machine using an industrial robot as a reference model. A nonlinear dynamics model of a multi-body structure including the end effector, base and the manipulator is established using the Lagrange's principle. The validity was verified by ADAMS simulation with the established dynamic model. Focusing on the low-frequency region, the influence of the robot assembly parameters on the vertical vibration response of the body is discussed. Based on the data summary, some optimization recommendations are made. The results of this paper may contribute to the design of vibration isolation for such robotic arm structures. • Considered the nonlinear multi-body dynamics of an industrial machine. • Established a seven-degree-of-freedom nonlinear dynamics model and verified by ADAMS. • Multiple super-harmonic resonance peaks and complex soft nonlinear phenomena were observed. [ABSTRACT FROM AUTHOR]

This article, titled "Retracted: Dynamic Simulation Modeling of Industrial Robot Kinematics in Industry 4.0," has been retracted by Hindawi due to evidence of systematic manipulation of the publication process. The investigation revealed discrepancies in scope, description of the research, availability of data, inappropriate citations, incoherent content, and manipulated peer review. Hindawi acknowledges that the usual quality checks did not identify these issues before publication and has implemented additional measures to safeguard research integrity. The corresponding author has been given the opportunity to respond to the retraction. [Extracted from the article]