Search

A dense system of pre-Hispanic urban centers has been found in the Upano Valley of Amazonian Ecuador, in the eastern foothills of the Andes. Fieldwork and light detection and ranging (LIDAR) analysis have revealed an anthropized landscape with clusters of monumental platforms, plazas, and streets following a specific pattern intertwined with extensive agricultural drainages and terraces as well as wide straight roads running over great distances. Archaeological excavations date the occupation from around 500 BCE to between 300 and 600 CE. The most notable landscape feature is the complex road system extending over tens of kilometers, connecting the different urban centers, thus creating a regional-scale network. Such extensive early development in the Upper Amazon is comparable to similar Maya urban systems recently highlighted in Mexico and Guatemala. [ABSTRACT FROM AUTHOR]

In the low-lying, river-rich Pearl River Delta in South China, an extensive network of flood defense levees, spanning over 4400 km, plays a crucial role in urban flood management. These levees are designed to withstand floods and storm surges, yet their failure can lead to significant human and economic losses, highlighting the need for robust urban flood defense strategies. This necessitates the development of a sophisticated geographic information system for the levee network and rapid, accurate assessment methods for levee conditions to support water management and flood mitigation efforts. This study focuses on the levees along the Hengmen waterway in the Pearl River Delta, utilizing airborne Light Detection and Ranging (LiDAR) technology to gather 3D spatial data of the levees. Employing the Cloth Simulation Filter (CSF) algorithm, non-ground point cloud data were extracted. The study improved upon the region-growing algorithm, using a seed point set approach for the automatic extraction of levee point cloud data. The accuracy and completeness of levee extraction were evaluated using the quality index. This method achieved effective extraction of four levee types, showing significant improvements over traditional algorithms, with extraction quality ranging from 72% to 83%. Key research outcomes include the development of a novel method for detecting localized levee depressions based on the computation of the variance of angles between normal vectors in single-phase levee point cloud data. An adaptive optimal neighborhood approach was utilized to accurately determine the normal vectors, effectively representing the local morphology of the levee point clouds. Applied in three levee depression detection experiments, this method proved effective, demonstrating the capability of single-phase data in identifying regions of levee depression deformation. This advancement in levee monitoring technology marks a significant step forward in enhancing urban flood defense capabilities in regions such as the cities of the Pearl River Delta in China. [ABSTRACT FROM AUTHOR]

Automatizing the extraction of different objects from remote sensing data with deep learning methods has been a popular research topic. Buildings have been one of those popular objects to be extracted. Not only does the selection of neural network affect the results and accuracy of extracted buildings, but also the selection of different types of data for the task. Digital surface models (DSMs) are increasingly used in remote sensing and their demand has increased. Retrieving height information from surface models has proved helpful for accurate extraction of buildings. In this study was investigated, if the use of light detection and ranging (LiDAR) DSMs and DEMs with 25 cm pixel resolution will lead to more accurate building extraction results in comparison to the use of aerial DSMs. Results with UNet models trained with building vector labels, DSMs, DEMs and true orthophotos from multiple areas of Finland, were produced with different data combinations from two Finnish cities, Savonlinna and Pudasj¨arvi, to see, which combination would lead to the most accurate building detection results. Results were evaluated partly by visual inspection, and partly by quantitative assessment. Based on the tests carried out, combining the information from true orthophotos with LiDAR DSMs and 25 cm DEMs provided the most accurate results. In forest area, using LiDAR data increased the accuracy of building detection. However, in urban area, due to missing buildings from LiDAR data, its advantages were compromised. We suggest that the use of both imagery and LiDAR data should be the optimal solution. [ABSTRACT FROM AUTHOR]

Fuels within the immediate vicinity of a house (e.g., within 30–60 m), referred to as the 'home-ignition zone', are important determinants of structure damage during wildfires. Methods for mapping home-ignition zone fuels using earth observing satellites are lacking, limiting the capacity to quantify the spatial and temporal dynamics of urban fuel hazard and wildfire risk. Here, we (i) develop a methodology to map the fractional cover of five common fuel types (i.e., bare, buildings, herbaceous, woody and water cover) at the scale of the home-ignition zone (45 m radius area) using Landsat, Sentinel 1, and PALSAR imagery, and (ii) demonstrate that these maps improve prediction of house loss in wildfires in western Canada. A fractional cover database was created across thirteen cities via manual digitisation of aerial photos and used to train and validate random forest models consisting of combinations of Landsat, Sentinel 1 and PALSAR indices. The best models for the fractional cover of each fuel type explained most of the variation in the data (R2 = 0.66–0.96) and had high accuracy (Mean absolute error = 0.02–0.11) with low bias (Mean error = −0.005–0.008). The combination of optical (Landsat) and synthetic aperture radar (Sentinel 1 and/or PALSAR) improved model accuracy relative to models containing only multi-spectral indices. A house loss database was then derived for five major fires in western Canada and used to examine the effect of mapped fractional cover on house loss rates for 227 neighbourhood blocks. House loss rates were greater in blocks with a low amount of defensible space (i.e., areas of low fuel hazard; bare, herbaceous, or water cover) surrounding houses compared to those with extensive defensible space. This finding is consistent with house loss research globally and exposure assessment guidelines for communities in North America. Our fuel cover mapping methodology will facilitate improvements to models of house loss through the inclusion of important home-ignition zone fuel properties, allowing for spatially and temporally dynamic (i.e., annual) estimates of house loss likelihood and wildfire risk to communities. • Fuel fractional cover can be accurately mapped with Landsat, PALSAR and Sentinel 1. • Fusing optical and radar imagery improved the predictive accuracy of cover models. • PALSAR and Sentinel 1 help distinguish cover types with similar spectral signatures. • Fuel cover maps improved the prediction of house loss during fire events. [ABSTRACT FROM AUTHOR]

In the past years various methods have been developed to estimate high-resolution solar potential in urban areas, by simulating solar irradiance over surface models that originate from remote sensing data. In general, this requires discretisation of solar irradiance models that estimate direct, reflective, and diffuse irradiances. The latter is most accurately estimated by an anisotropic model, where the hemispherical sky dome from arbitrary surface's viewpoint consists of the horizon, the circumsolar and sky regions. Such model can be modified to incorporate the effects of shadowing from obstruction with a view factor for each sky region. However, state-of-the-art using such models for estimating solar potential in urban areas, only considers the sky view factor, and not circumsolar view factor, due to high computational load. In this paper, a novel parallelisation of solar potential estimation is proposed by using General Purpose computing on Graphics Processing Units (GPGPU). Modified anisotropic Perez model is used by considering diffuse shadowing with all three sky view factors. Moreover, we provide validation based on sensitivity analysis of the method's accuracy with independent meteorological measurements, by changing circumsolar sky region's half-angle and resolution of the hemispherical sky dome. Finally, the presented method using GPPGU was compared to multithreaded Central Processing Unit (CPU) approach, where on average a 70x computational speedup was achieved. Finally, the proposed method was applied over a ∼ 21 km 2 urban area, obtained from Light Detection And Ranging (LiDAR) data, where the computation of solar potential was performed in a reasonable time. • A new method for high-resolution solar potential estimation using GPGPU. • Novel incorporation of the modified Perez anisotropic diffuse irradiance model. • The method considers sky, circumsolar, and horizon view factors with shadowing. • In comparison to a multithreaded CPU approach, a 70x speedup can be achieved. [ABSTRACT FROM AUTHOR]