Search

Plate end debonding is a common failure mode for fiber reinforced polymer (FRP) strengthened beams. FRP sheets and shape memory alloy (SMA) composites can effectively slow down plate end debonding and improve beam ductility owing to the anchorage effect of SMA wires on the FRP ends. This work aims to comprehensively study the anchorage performance of FRP/SMA composite strengthened beams through both model analysis and experimental investigation. The plate end debonding strength models of existing FRP strengthened beams were initially summarized and analyzed, and an improved model was proposed to predict the debonding strength of FRP/SMA composite strengthened beams at the plate end. Moreover, the anchorage performance and flexural behavior of beams strengthened with carbon fiber reinforced polymer (CFRP) and SMA composites were studied through experiments. The failure mode of the FRP sheet strengthened beams was plate end debonding failure, while the plate end debonding failure of the CFRP/SMA composite strengthened beams occurred at the strengthening zone end, and the peeling failure was delayed owing to the anchorage effect of SMA wires on the ends of the strengthening CFRP sheets. The recovery effect of SMA wires could successfully introduce prestress into CFRP sheets. Moreover, the CFRP strain corresponding to plate end debonding increased because of the anchorage of SMA wires on the CFRP sheet in the strengthening zone. The strength and ductility of the CFRP/SMA composite strengthened beam significantly improved. The proposed model for predicting the plate end debonding strength of FRP/SMA composite strengthened beams was validated through experiments. • An improved model is proposed to predict the debonding strength of beams strengthened with FRP/SMA composites at the plate ends. • The debonding failure was delayed due to the anchorage effect of SMA wires on CFRP sheets in the strengthening zone. • The strength and ductility of the beam strengthened with CFRP/SMA composites have been significantly improved. • The proposed model for predicting the plate end debonding strength of FRP/SMA composite strengthened beams was validated through experiments. [ABSTRACT FROM AUTHOR]