Search

In this article, the non‐linear free vibration behavior of sandwich composite panels with sinusoidal corrugations is examined. These panels consist of a top and bottom skin made of a graphene‐reinforced composite, with an auxetic honeycomb core having negative Poisson's ratio. The non‐linear kinematic field is based on Kant's higher‐order shear‐deformation theory and the Green‐strain, which incorporates all the higher‐order terms. By implementing the Hamilton principle, the non‐linear governing equations are affirmed and solved further through 2D‐isoparametric finite element approximations via Lagrangian elements in conjunction with Picard's successive iterative scheme. The comparison and validation tests demonstrate the correctness of the present model. The established sandwich model is further employed for various parametric conditions by varying the core‐to‐face sheet thickness, auxetic honeycomb properties, graphene volume fraction, shell configurations, temperature, and support conditions. These numerous results exemplify the non‐linear frequencies at small‐to‐large amplitudes for the sandwich shell structures and are discussed in detail. In addition, a multi‐objective parametric optimization is conducted using the response surface method to investigate the optimal values of the corrugated auxetic honeycomb shell panel's parameters, resulting maximum frequency. Highlights: Non‐linear vibration of corrugated sandwich shell panel.Graphene reinforced skins and honeycomb auxetic core.Kant's higher‐order shear‐deformation theory and Green‐Lagrange non‐linearity.Hamilton principle and Picard's successive iterative scheme.Multi‐objective parametric optimization and prediction using response surface methodology. [ABSTRACT FROM AUTHOR]

The main objective of this paper is to evaluate the dynamic behaviour of sandwich toroidal shells composed of a core with negative Poisson ratio (auxetic honeycomb material) and nanocomposite enriched coating layers under impulsive/periodic pressures considering the geometrical nonlinearity. The set of nonlinear equilibrium equations based on the first-order shear deformation theory are and the resultant nonlinear differential motion equations are approximately solved by the Galerkin method and 4th-order Runge–Kutta solution, respectively. The achieved responses show that the amplitude of outward deformations is intensively increased when the proposed sandwich shells are subjected to rectangular periodic and impulsive loadings which shows the destructive effects of this type dynamic loading. The performed parametric studies shows that these destructive effects can be controlled by changing the geometrical properties of the honeycomb cells and the volume fractions of the nanocomposites in the coating layers. It is notable that in the previous studies the nonlinear dynamic response of toroidal shells subjected to various periodic and impulsive pressures was not investigated. However, in the present work, the mentioned dynamic responses were achieved and investigated without spending time-consuming computational. In fact, the novelty of this work is to develop such a robust and efficient tool. [ABSTRACT FROM AUTHOR]

This paper examines the impact of polyurethane foam (PUF) filling on the dynamic response of honeycomb sandwich beams (HSBs) through the blast testing. The HSBs are composed of steel face sheets and an aluminium alloy honeycomb core filled with PUF. A comparative analysis of damage modes is conducted between conventional hexagonal and auxetic HSBs, considering both foam-filled and unfilled configurations. The results reveal that the HSBs with foam filling demonstrate significantly enhanced blast performance compared to their counterparts without foam filling. This superiority is evident in both global deformation and local damage characteristics. Furthermore, a well-validated numerical model is developed to examine the damage mechanisms of PUF-filled HSBs under blast loading. The investigation reveals that appropriate PUF filling methods can effectively enhance bending resistance while minimizing the decline in the energy absorption efficiency. Finally, a multiobjective optimization was conducted using the back-propagation (BP) neural network and the SPEA2 algorithm to identify the optimal position for PUF. By utilizing a reduced foam filling approach as opposed to completely filling the structure, the two optimized configurations show a decrease in deformation of 5.38 % with an equivalent specific energy absorption (SEA) or an increase in the SEA by 5.26 % with an equivalent deformation. [ABSTRACT FROM AUTHOR]

• Effects of heating and cooling thermal shock on thermally induced vibration (TIV) are explored. • Influence of geometric nonlinearity under heating/cooling thermal shock forms is revealed. • The TIV characteristics of sandwich beams with auxetic honeycomb cores are discussed and compared with traditional honeycomb. • The instability conditions of the clamped beam with immovable ends under heating thermal shock are given. The nonlinear thermally induced vibration (TIV) characteristics of sandwich beams with auxetic honeycomb cores under general boundary conditions are studied. Based on first-order shear deformation theory, the dynamic governing equations are obtained through Hamilton principle, in which geometric nonlinearity and temperature dependence are considered. The temperature field along the thickness is calculated by finite element method and nonlinear TIV responses are solved via Newton-Raphson-Newmark method. The effects of temperature dependency, thermal shock forms, geometric nonlinearity, thicknesses of beam and face-sheet, boundaries and honeycomb geometrical parameters are studied. Results show that the reduction of the absolute inclined angle of the auxetic honeycomb can weaken the TIV responses. The influence of geometric nonlinearity on quasi-static and dynamic responses depends on the thermal shock form. Thermal buckling is the necessary condition for the occurrence of the TIV in clamped beams with immovable ends. Moreover, the research provides some design references to suppress the TIV responses of the sandwich beam with auxetic honeycomb core. [ABSTRACT FROM AUTHOR]

Modern engineering extensively employs complexly curved shell structures, presenting mathematical challenges in analyzing their mechanical behavior due to geometric intricacies. The recent trend of incorporating advanced lightweight materials into these structures drives the need to develop improved theories and methods. This study presents an investigation into the free vibration analysis of barrel-shaped sandwich (BSS) shells using a modified thick shell theory (MTST). These sandwich shells feature functionally graded (FG) ceramic-metal layers on both inner and outer surfaces, with a lightweight honeycomb core. Notably, the honeycomb layer's thickness surpasses that of the inner and outer layers, necessitating the application of thick shell theory for accurate analysis. However, previous studies have often used classical theories for thin shells, and those applying thick shell theory sometimes neglected the curvature effects in the fundamental equations and rotary inertia components. Thus, this research employs the MTST to overcome these limitations. The study includes comparative validations and explores the impact of material parameters and curvature radii on the natural frequencies of these barrel-shaped sandwich shells through numerical examples. [ABSTRACT FROM AUTHOR]

In this study, a model for the nonlinear dynamic analysis of the geometrically imperfect sandwich beam with functionally graded material (FGM) facets and auxetic honeycomb core is proposed. The auxetic feature of the honeycomb material is realized by a homogenization method, which gives the expressions of the effective material coefficients in terms of material property and cellular geometric parameters. The nonlinear motion equation of the geometrically imperfect beam is derived based on the Reddy's higher shear deformation theory, von Kármán nonlinear theory, as well as general geometric imperfection function. The thermal effect on the material properties and structural rigidity is also taken into account in this model. The Newmark method and Newton–Raphson iterative method are employed to solve the nonlinear motion equation of the sandwich beam. In numerical examples, the dynamic response of the sandwich beam under two types of load, i.e. moving load and impulse load, are discussed in details. The influences of various factors (such as material parameter, geometric imperfection, and thermal condition) on the nonlinear dynamic behaviors of the sandwich beam are elaborately investigated. The numerical results show those factors can play significant roles in the bearing ability, structural stiffness, or nonlinear dynamic behaviors of the sandwich beam in certain conditions. Some key conclusions on the influences are drawn from the numerical results, which can be a useful reference for future investigations. [ABSTRACT FROM AUTHOR]