Search

A theoretical model has been developed to express the longitudinal and transverse piezoelectric effects in ferro/piezoelectrets. This model is an extension of the classic model based on layer-dielectric structures that focuses on the longitudinal piezoelectric effect. The improved model reveals that the relation between the longitudinal piezoelectric d33 coefficient and the transverse piezoelectric d31 coefficient is associated with Poisson's ratio μ13 (or μ31) and Young's moduli Y1 and Y3. The polarity of the two coefficients is opposite for materials with a positive Poisson's ratio as normally observed in conventional piezoelectric materials, and the same for materials with a negative Poisson's ratio, i.e., auxetic materials. The experimental results available in the literature and obtained from ferroelectret metamaterials with a honeycomb cross-sectional structure and two-dimensional (2D) symmetric structure, called 2D ferroelectret metamaterials, designed and prepared in this study reasonably agree with theoretical predictions. This study not only extends the scope of the metamaterials by inducing the concept of ferroelectret metamaterials but also provides a strategy for designing ferroelectrets with designable properties. [ABSTRACT FROM AUTHOR]

This paper presents a novel rhombic star-shaped honeycomb (RSSH) configuration with tunable Poisson's ratio and elastic modulus, and an RSSH with the U-shaped ligaments (URSSH) configuration is generated to analyze the effect of the curved ligaments on the elastic properties of RSSH. Cellular structure of RSSH combines with a rhombic and an improved star-shaped geometry, which can also be subdivided into flexible segments and rigid segments. In-plane elastic properties of the RSSH cell, including Poisson's ratio and elastic modulus, are both derived by analytical model based on flexibility modeling method and Castigliano's second theorem. Based on the guidance of theoretical model, quasi-static tensile experiments and finite element simulation of RSSH and URSSH specimens are carried out with different Poisson's ratio. The experimental results are in good agreement with the theoretical predictions and finite element analysis results. Length of cellular ligaments Lt1, dt have linear relationship with mechanical properties of the RSSH cell under constant angle θ1 and make the cellular configurations with different Poisson's ratio more obtainable. The effect of the symmetry of the flexible segments on the cellular mechanical properties is also analyzed through theoretical prediction. The introduction of asymmetry can bring wider design space of RSSH mechanical properties, especially Poisson's ratio. This work demonstrates the promising potential for applying RSSH configurations in 2D morphing structures with tunable auxetic behaviors. [ABSTRACT FROM AUTHOR]

In this article, the non‐linear free vibration behavior of sandwich composite panels with sinusoidal corrugations is examined. These panels consist of a top and bottom skin made of a graphene‐reinforced composite, with an auxetic honeycomb core having negative Poisson's ratio. The non‐linear kinematic field is based on Kant's higher‐order shear‐deformation theory and the Green‐strain, which incorporates all the higher‐order terms. By implementing the Hamilton principle, the non‐linear governing equations are affirmed and solved further through 2D‐isoparametric finite element approximations via Lagrangian elements in conjunction with Picard's successive iterative scheme. The comparison and validation tests demonstrate the correctness of the present model. The established sandwich model is further employed for various parametric conditions by varying the core‐to‐face sheet thickness, auxetic honeycomb properties, graphene volume fraction, shell configurations, temperature, and support conditions. These numerous results exemplify the non‐linear frequencies at small‐to‐large amplitudes for the sandwich shell structures and are discussed in detail. In addition, a multi‐objective parametric optimization is conducted using the response surface method to investigate the optimal values of the corrugated auxetic honeycomb shell panel's parameters, resulting maximum frequency. Highlights: Non‐linear vibration of corrugated sandwich shell panel.Graphene reinforced skins and honeycomb auxetic core.Kant's higher‐order shear‐deformation theory and Green‐Lagrange non‐linearity.Hamilton principle and Picard's successive iterative scheme.Multi‐objective parametric optimization and prediction using response surface methodology. [ABSTRACT FROM AUTHOR]

Lattice structures nowadays have gained a peak in research. Inspired by the honeycomb structure and fishbone, this study investigated lattice structures that can provide auxetic behavior and store maximum energy absorption during deformation mode. From that, the study involved designing and producing different modified lattices based on the honeycomb's structure and the fishbone's perspective. The specimens were 3D printed within fused filament fabrication techniques within the additive manufacturing platform of Euromed University of Fes. The conception, production, mechanical testing, and simulation have been employed to get optimum data analysis of the mechanical properties of the designed structures. The results observed under quasi-dynamic compression did not show significant densification behavior; but, the auxetic behavior was seen in all structures, while some suddenly collapsed. The experimental and numerical analysis demonstrated similar deformation behavior and strong agreement in their respective results. Nevertheless, some discrepancies in mechanical values were observed, with a relative percentage error of approximately 1% for both methods. Consequently, owing to the enhanced energy absorption observed in the V2 and V3 structures, it is evident that these modifications hold promise for optimizing the performance of these metamaterials in various practical applications. [ABSTRACT FROM AUTHOR]

The main objective of this paper is to evaluate the dynamic behaviour of sandwich toroidal shells composed of a core with negative Poisson ratio (auxetic honeycomb material) and nanocomposite enriched coating layers under impulsive/periodic pressures considering the geometrical nonlinearity. The set of nonlinear equilibrium equations based on the first-order shear deformation theory are and the resultant nonlinear differential motion equations are approximately solved by the Galerkin method and 4th-order Runge–Kutta solution, respectively. The achieved responses show that the amplitude of outward deformations is intensively increased when the proposed sandwich shells are subjected to rectangular periodic and impulsive loadings which shows the destructive effects of this type dynamic loading. The performed parametric studies shows that these destructive effects can be controlled by changing the geometrical properties of the honeycomb cells and the volume fractions of the nanocomposites in the coating layers. It is notable that in the previous studies the nonlinear dynamic response of toroidal shells subjected to various periodic and impulsive pressures was not investigated. However, in the present work, the mentioned dynamic responses were achieved and investigated without spending time-consuming computational. In fact, the novelty of this work is to develop such a robust and efficient tool. [ABSTRACT FROM AUTHOR]

• 3D origami-inspired auxetic honeycomb with omni-directional high stiffness is proposed. • Theoretical models for predicting the elastic mechanical properties of the CFRP composite 3D honeycombs are developed. • The 3D honeycomb can be applied where good load-bearing capacity and obvious auxetic effect are simultaneously desired. • The 3D honeycomb suggests a potential for 3D isotropic auxetic design. Traditional 3D auxetic materials face significant limitations, marked by low stiffness and pronounced anisotropy. To address these challenges, here a new kind of 3D origami-inspired auxetic honeycomb with omni-directional high stiffness is proposed by us. Two simplified theoretical models based on different assumptions are developed to predict structural homogenized elastic properties along the principal axes. Combined theoretical and numerical studies are carried out to reveal the auxetic mechanism and dominated deformation characteristics of the 3D honeycomb. In order to gain a understanding of its elastic anisotropy, directional dependence of structural homogenized Young's moduli, Poisson's ratios and shear moduli are also investigated in detail. A detailed examination of the dependence of structural homogenized Young's moduli, Poisson's ratios, and shear moduli on loading direction is conducted to comprehend its elastic anisotropy. This paper introduces a feasible method for the rapid manufacturing of the 3D honeycomb using high-performance continuous carbon fiber reinforced composite (CFRP) based on hot-pressing molding. Subsequently, the compressive elastic behaviors of CFRP 3D honeycombs are characterized and evaluated through experimental tests. A comparison with traditional 3D auxetic materials reveals the 3D honeycomb's superiority in both multi-axial loading and rapid manufacturing. Additionally, the demonstrative example suggests that the 3D honeycomb can offer nearly isotropic Poisson's ratio of about −0.9. These results not only demonstrate that the 3D honeycomb is an excellent candidate for applications where both good load-bearing capacity and notable auxetic effect are simultaneously desired but also highlight its potential for 3D isotropic auxetic design. [ABSTRACT FROM AUTHOR]

Flexible piezoelectric sensors have received widespread attention in wearable electronics for their ability to convert mechanical energy into electrical energy, while the insufficient output power and complex preparation process have limited their application. In this work, several honeycomb structures based on graphene macro-film (GAMF) were created via laser engraving, which can utilize negative Poisson's ratio (NPR) properties to improve the output electric performance of flexible piezoelectric sensors. The effect of different electrode materials on the piezoelectric output was investigated in the experiments and compared with the theoretical equations, indicating that the output power of the sensor could be enhanced up to 142 % by improving the materials auxetic mechanical properties. The stability tests have proven that the sensors can operate effectively for a long time under different operating conditions. Moreover, the optimized sensor shows powerful potential for monitoring human movements such as finger tapping, joint bending, and foot stepping. This work opens up a new development path for the preparation of convenient and high-performance wearable electronic devices. The negative Poisson's ratio characteristic of the honeycomb graphene macro-film is used to increase the deformation of PVDF film to increase the electrical output performance of the flexible piezoelectric sensor. The optimized sensor can be used to detect human movements. [Display omitted] • Honeycomb graphene macro-films with different mechanical properties were prepared by laser engraving. • Flexible piezoelectric sensors based on honeycomb graphene macro-films are prepared. • The output performance of piezoelectric sensors can be improved by adjusting mechanical properties of electrode materials. • The flexible piezoelectric sensors can be used to detect human movements. [ABSTRACT FROM AUTHOR]

This paper examines the impact of polyurethane foam (PUF) filling on the dynamic response of honeycomb sandwich beams (HSBs) through the blast testing. The HSBs are composed of steel face sheets and an aluminium alloy honeycomb core filled with PUF. A comparative analysis of damage modes is conducted between conventional hexagonal and auxetic HSBs, considering both foam-filled and unfilled configurations. The results reveal that the HSBs with foam filling demonstrate significantly enhanced blast performance compared to their counterparts without foam filling. This superiority is evident in both global deformation and local damage characteristics. Furthermore, a well-validated numerical model is developed to examine the damage mechanisms of PUF-filled HSBs under blast loading. The investigation reveals that appropriate PUF filling methods can effectively enhance bending resistance while minimizing the decline in the energy absorption efficiency. Finally, a multiobjective optimization was conducted using the back-propagation (BP) neural network and the SPEA2 algorithm to identify the optimal position for PUF. By utilizing a reduced foam filling approach as opposed to completely filling the structure, the two optimized configurations show a decrease in deformation of 5.38 % with an equivalent specific energy absorption (SEA) or an increase in the SEA by 5.26 % with an equivalent deformation. [ABSTRACT FROM AUTHOR]

• A class of modified hexagonal honeycomb to realize pattern transformation. • Honeycomb's elastic constants are derived by theoretical energy analysis. • Honeycomb structures exhibit auxetic behavior after pattern transformation. • The cell/node of the honeycomb has a rotating behavior after pattern transformation. • The underlying mechanism of pattern transformation is revealed for honeycomb. Pattern transformation, as one of the special properties of mechanical metamaterials, is widely found in elastic porous structures and gradually expanding to honeycomb structures. Inspired by the higher-order flower-like buckling pattern of hexagonal honeycomb, and generalizing the geometry of structures that pattern transformation occurs under uniaxial compression, this paper proposes a Modified Hexagonal Honeycomb(MHH) structure by adjusting the thickness ratio α and the deflection extension angle θ of the cell wall to topologically reconstruct the honeycomb structure to initiate the first-order quasi-flower-like buckling pattern under uniaxial loading. Results show that the quasi-flower-like pattern transformation appears directly for the MHH structure under uniaxial compression, accompanied with a transition of the Poisson's ratio, from positive to negative. And the butterfly pattern, which appears for traditional hexagonal honeycomb only under biaxial loading, is also observed for the MHH under uniaxial compression. The relative size of the nodes among cell walls is believed to play a crucial role on the appearance of the pattern transformation of the honeycomb structure. This work has revealed the underlying physical mechanism for pattern transformation of honeycomb structures, and would also extend the application range of honeycomb structures to the design of elastic dampers, bending/torsion actuators, or robot drive joints. [ABSTRACT FROM AUTHOR]

• The proposed auxetic honeycomb possesses more excellent auxetic behavior and specific energy absorption than the conventional honeycomb. • The interaction between the structural parameters is analyzed. • The multi-objective optimization of the enhanced auxetic honeycomb (EAH) was investigated. • The theoretical model and Box-Behnken Design model were used to predict the mechanical properties of EAH. In response to the challenge of low stiffness and energy absorption capacity, various designs of negative Poisson's ratio (NPR) structures have emerged. However, these designs often lack a comprehensive analysis of other mechanical properties, leading to subpar mechanical performance. Previous studies have explored the mechanical properties response of enhanced re-entrant honeycombs (ERH) under impact conditions, revealing limitations in optimizing the structure's performance with a single objective. Therefore, this study aims to enhance ERH structural parameters to achieve superior mechanical performance through theoretical derivations and geometric optimizations. The results demonstrate that the proposed theoretical model is consistent with finite element analysis and response surface (RS) predictions. Expressions for Young's modulus, specific energy absorption, and compressive strength are proposed, facilitating the identification of structural parameters that meet specific requirements during reverse design. Furthermore, a multi-objective optimization approach optimizes the geometric parameters based on maximum energy absorption and compressive strength. The mechanical behavior of the optimized ERH is investigated using the finite element method, revealing the energy absorption capacity of 13.78 J/g while maintaining Poisson's ratio at -1.06. Additionally, the deformation mode of the optimized structure showcases enhanced stability compared to traditional honeycomb structures. The theoretical model and RS method were used to guide the design of ERH and promote the application of NPR structures. [ABSTRACT FROM AUTHOR]

• Innovative metamaterial design approach proposed to improve energy absorption capacity. • Varying the structural parameter (D/d) enhanced the metamaterial auxetic effect. • HPH metamaterials absorb energy effectively horizontally with their honeycomb structure. • HPH metamaterials show excellent reusability at lower compression ratios. Hexagonal perforated honeycomb (HPH) metamaterials were designed, fabricated and investigated in this work. Initially, the mechanical properties and deformation modes of various proposed HPH metamaterials (HPH-U, HPH-1 L and HPH-3 L) under quasi-static vertical compression were analyzed using experimental and finite element methods. The findings reveal significant improvements in mechanical properties and energy absorption due to the honeycomb and hierarchical expandable design. Notably, the auxetic effect is diminished. Subsequently, the impact of key dimensional parameters on the mechanical properties and Poisson's ratio behavior was explored. The results highlighted that an increase of elliptical perforation major axis to minor axis ratio enhanced the auxetic effect but compromised load-bearing and absorptive capacity. Additionally, HPH metamaterials displayed exceptional performance under quasi-static horizontal compression, with their honeycomb structure enabling them to withstand both vertical and horizontal impacts while exhibiting excellent energy absorption capabilities. The study also identified relative density as a crucial factor influencing horizontal impact performance. Finally, the study subjected the HPH metamaterials to multiple quasi-static vertical repetitive compressions, meticulously analyzing variations in mechanical properties under diverse compression ratios. Due to distinctive structural design and impressive mechanical properties, HPH metamaterials demonstrate immense potential for applications in automotive engineering and sports protection fields. [Display omitted] [ABSTRACT FROM AUTHOR]

Light composite materials such as auxetic honeycomb structures offer a unique combination of strength, lightweight, and durability, making them ideal for a wide range of industrial and structural applications. Consequently, it is crucial to study the effect of these materials on the dynamic behavior of structures. In this study, an analytical solution based on the multiple-scale method has been proposed to solve equations of motion of a multilayer axisymmetric annular plate. The plate includes two top and bottom isotropic layers and one auxetic honeycomb core layer. By considering both radial and transverse deflections, the governing equations are derived based on the first-order shear deformation theory. The radial and transverse frequencies of the plate are determined from the order zero of equations and a correction coefficient for each frequency has been extracted from the order one and solvability conditions. The response of the plate under harmonic transverse excitation has been determined analytically and by conducting a parametric study, the effect of different geometrical and mechanical parameters on the free and forced vibration responses has been studied. It is observed that employing a honeycomb core in the multilayer plate allows us to significantly decrease the plate weight while the dynamic response and the frequencies remain nearly the same or vary slightly. The results are validated by comparing them with the finite element method and some other references. • An analytical solution for the free and forced vibration of an auxetic composite annular plate is proposed based on the FSDT. • By employing the multiple-scale method, a correction factor for the natural frequencies is determined. • The effect of different combinations of boundary conditions on frequencies is investigated. • The forced vibration lateral and axial responses to a harmonic excitation are determined. • The effect of the auxetic honeycomb layer on the vibration behavior of the plate is studied. [ABSTRACT FROM AUTHOR]

Lightweight materials used for impact mitigation must be able to resist impact and absorb the maximum amount of energy from the impactor. Auxetic materials have the potential to achieve high resistance by drawing material into the impact zone and providing higher indentation and shear resistance. However, these materials must be artificially designed, and the large deformation dynamic effects of the created structures must be taken into consideration when deciding on a protection concept. Despite their promise, little attention has been given to understanding the working mechanisms of high-rate and finite deformation effects of architected auxetic lattice structures. This study compares the static and dynamic elastic properties of different auxetic structures with a honeycomb structure, a typical non-auxetic lattice, at equivalent mass and stiffness levels. In this study, we limit the investigation to elastic material behavior and do not consider contact between the beams of the lattices. It is demonstrated that the equivalent static and dynamic properties of individual lattices at an undeformed state are insufficient to explain the variations observed in impact situations. In particular, the initial Poisson's ratio does not determine the ability of a structure to resist impact. To gain a thorough comprehension of the overall behavior of these structures during localized, high rate compression, the evolution of the elastic tangent properties under compression and shear deformation was monitored, leading to a more profound understanding. Observations made in one configuration of stiffness and mass are replicated and analyzed in related configurations. [Display omitted] • Different lattice architectures are modeled using nonlinear Timoshenko beams. • Auxetic and non-auxetic lattices are compared for static and impact loading. • The lattice geometry is more decisive in impact mitigation than the Poisson's ratio. • Good impact protection is not guaranteed by a high initial Young's modulus. • Maintaining a high lateral pressure wave speed helps to distribute impact energy. [ABSTRACT FROM AUTHOR]

• Effects of heating and cooling thermal shock on thermally induced vibration (TIV) are explored. • Influence of geometric nonlinearity under heating/cooling thermal shock forms is revealed. • The TIV characteristics of sandwich beams with auxetic honeycomb cores are discussed and compared with traditional honeycomb. • The instability conditions of the clamped beam with immovable ends under heating thermal shock are given. The nonlinear thermally induced vibration (TIV) characteristics of sandwich beams with auxetic honeycomb cores under general boundary conditions are studied. Based on first-order shear deformation theory, the dynamic governing equations are obtained through Hamilton principle, in which geometric nonlinearity and temperature dependence are considered. The temperature field along the thickness is calculated by finite element method and nonlinear TIV responses are solved via Newton-Raphson-Newmark method. The effects of temperature dependency, thermal shock forms, geometric nonlinearity, thicknesses of beam and face-sheet, boundaries and honeycomb geometrical parameters are studied. Results show that the reduction of the absolute inclined angle of the auxetic honeycomb can weaken the TIV responses. The influence of geometric nonlinearity on quasi-static and dynamic responses depends on the thermal shock form. Thermal buckling is the necessary condition for the occurrence of the TIV in clamped beams with immovable ends. Moreover, the research provides some design references to suppress the TIV responses of the sandwich beam with auxetic honeycomb core. [ABSTRACT FROM AUTHOR]

An analytical model is formulated for 2-D periodic negative honeycomb thicken strut re-entrant lattice structures and a modified rounded corner negative honeycomb structure that shows negative Poisson's ratios (NPR). Analytical modeling is done using Castigliano's second theorem, where each beam is modeled using Timoshenko beam theory, considering bending, stretching, and transverse shearing. Elastic modulus and Poisson's ratio have been formulated for both structures in the form of non-dimensional geometrical characteristics, such as length ratios, angles of re-entrant arms, shear correction factor, and the material's Young's modulus and Poisson's ratios. Numerical simulations conducted in ABAQUS-CAE explicit solver validate the analytical model. The effect of the non-dimensional parameters on the qualities of the developed structure is demonstrated. It is observed that the structures with a low curvature ratio have a high fluctuation of Poisson's ratio and Elastic constant when plotted against the other parameters. The slenderness ratio has little impact on Poisson's ratio but significantly influences elastic modulus. It is shown that various needs can be satisfied by customizing the Poisson's ratios and elastic constant of both forms of lattice construction over an extensive range by carefully choosing the geometrical parameters and material. [ABSTRACT FROM AUTHOR]

Auxetic lattice structures are known for their superior stiffness-to-density and strength-to-density ratios. Re-entrant hourglass exhibits an acceptable equivalent elastic modulus and remarkable energy absorption capacity among various auxetic configurations due to their flexibility and hinge deflecting during crushing loads. This study introduces a curved hourglass honeycomb which can be produced using 3D printing with pure or reinforced filaments incorporating continuous fibers. New closed-form formulations are analytically derived using an energy method by considering an extracted unit cell to predict the equivalent in-plane mechanical properties for the first time. The plateau stress of the proposed honeycomb is evaluated at the densification state of a unit cell using the energy conservation theory, equating external work with plastic energy dissipation. The accuracy of these extended relations is validated against experimental outcomes, demonstrating good agreement between analytical and experimental results. Additionally, robust linear and nonlinear finite element analyses are conducted to assess the accuracy of the obtained relations, including the equivalent stiffness and plateau stress for structures produced with reinforced filaments. The nonlinear finite element code employs appropriate subroutines to model plasticity/damage events. Based on the established analytical relations for stiffness and plateau stress, multi-objective optimization using Genetic Algorithm is applied to define optimum values for the Pareto front chart's objective functions of stiffness and plateau stress. The optimization process involves exploring the design space and defining the values of geometrical parameters to achieve the desired objectives. In conclusion, this study presents a novel approach to developing curved re-entrant honeycomb structures, with analytical formulations validated against experimental and numerical results. Optimization helps to identify optimal configurations concerning stiffness and plateau stress, offering potential applications in lightweight and high-strength materials design. According to the obtained results, for selection of the best value for curved strut angle which results in the optimum value of stiffness and plateau stress, a range between 10°-34° can be considered depending on the volume fraction of fibers. [ABSTRACT FROM AUTHOR]

Recently, auxetic metamaterials have turned into an area of growing interest, because of their deformation uniqueness, design flexibility, and functional diversity. To achieve their programmable design of densification and energy absorption, the variable stiffness factor method (VSF) emerged. However, the energy absorption capacity of the metamaterials designed by this method has a significant reduction. In this work, to remedy this defect, several different lightweight specimens are proposed and fabricated to extend the stage of energy absorption and retain the tunability. Then quasi-static compression tests and finite element methods are carried out to analyze the mechanical properties of the designed boundary-constrained structure (BCS) and X-shape constrained structure (XCS). The accuracy of the densification points and energy absorption capacity of the two structures at different VSF values are also studied. The results show that the densification points of the designed structures can be adjusted quantitatively, and their deformation modes are more stable than conventional structures during compression. Furthermore, their specific energy absorption is four and five times higher than that of non-lightweight structures with VSF = 40%, respectively. These findings contribute to advancing the implementation of auxetics in applications of multistage protective structures. • A lightweight metamaterial based on the variable stiffness factor (VSF) method is proposed. • The proposed structures realize multi-level energy absorption and stable deformation. • The SEA of proposed structures was 4 and 5 times higher than that of VSF = 40% structure. [ABSTRACT FROM AUTHOR]

Modern engineering extensively employs complexly curved shell structures, presenting mathematical challenges in analyzing their mechanical behavior due to geometric intricacies. The recent trend of incorporating advanced lightweight materials into these structures drives the need to develop improved theories and methods. This study presents an investigation into the free vibration analysis of barrel-shaped sandwich (BSS) shells using a modified thick shell theory (MTST). These sandwich shells feature functionally graded (FG) ceramic-metal layers on both inner and outer surfaces, with a lightweight honeycomb core. Notably, the honeycomb layer's thickness surpasses that of the inner and outer layers, necessitating the application of thick shell theory for accurate analysis. However, previous studies have often used classical theories for thin shells, and those applying thick shell theory sometimes neglected the curvature effects in the fundamental equations and rotary inertia components. Thus, this research employs the MTST to overcome these limitations. The study includes comparative validations and explores the impact of material parameters and curvature radii on the natural frequencies of these barrel-shaped sandwich shells through numerical examples. [ABSTRACT FROM AUTHOR]

In this study, a model for the nonlinear dynamic analysis of the geometrically imperfect sandwich beam with functionally graded material (FGM) facets and auxetic honeycomb core is proposed. The auxetic feature of the honeycomb material is realized by a homogenization method, which gives the expressions of the effective material coefficients in terms of material property and cellular geometric parameters. The nonlinear motion equation of the geometrically imperfect beam is derived based on the Reddy's higher shear deformation theory, von Kármán nonlinear theory, as well as general geometric imperfection function. The thermal effect on the material properties and structural rigidity is also taken into account in this model. The Newmark method and Newton–Raphson iterative method are employed to solve the nonlinear motion equation of the sandwich beam. In numerical examples, the dynamic response of the sandwich beam under two types of load, i.e. moving load and impulse load, are discussed in details. The influences of various factors (such as material parameter, geometric imperfection, and thermal condition) on the nonlinear dynamic behaviors of the sandwich beam are elaborately investigated. The numerical results show those factors can play significant roles in the bearing ability, structural stiffness, or nonlinear dynamic behaviors of the sandwich beam in certain conditions. Some key conclusions on the influences are drawn from the numerical results, which can be a useful reference for future investigations. [ABSTRACT FROM AUTHOR]

In this paper, an analytical investigation is presented on the natural frequency analysis of sandwich plate resting on Winkler-Pasternak type elastic foundations in thermal environment. The sandwich plate consists of an auxetic honeycomb core with negative Poisson's ratio, which is assumed to perfectly bond to two carbon nanotube reinforced composite (CNTRC) face sheets to ignore potential interface effects or imperfections in bonding. The material properties of CNTRC are assumed to be temperature dependent. The volume fraction of carbon nanotube (CNT) varies through the thickness dimension according to linear functions with five different distribution patterns of CNT including UD, FG-O, FG-V, FG-Λ and FG-X. The governing equations of motion are derived based on the Reddy's first order shear deformation plate theory and Hamilton's principle, and the expression of the natural frequency is performed via Galerkin method. Artificial neural network (ANN) model is established to accurately predict the natural frequency of the sandwich plate on the basis of 1450 data points collected from analytical results. The effects of various material and geometrical parameters on the natural frequency of the sandwich plate are investigated in details. [ABSTRACT FROM AUTHOR]