Search

Honeycomb structures made of carbon-fiber-reinforced plastic (CFRP) are increasingly used in the aerospace field due to their excellent energy absorption capability. Attention has been paid to CFRP structures in order to accurately simulate their progressive failure behavior and discuss their ply designability. In this study, the preparation process of a CFRP corrugated sheet (half of the honeycomb structure) and a CFRP honeycomb structure was illustrated. The developed finite element method was verified by a quasi-static test, which was then used to predict the low-velocity impact (LVI) behavior of the CFRP honeycomb, and ultimately, the influence of the ply angle and number on energy absorption was discussed. The results show that the developed finite element method (including the user-defined material subroutine VUMAT) can reproduce the progressive failure behavior of the CFRP corrugated sheet under quasi-static compression and also estimate the LVI behavior. The angle and number of plies of the honeycomb structure have an obvious influence on their energy absorption under LVI. Among them, energy absorption increases with the ply number, but the specific energy absorption is basically constant. The velocity drop ratios for the five different ply angles are 79.12%, 68.49%, 66.88%, 66.86%, and 60.02%, respectively. Therefore, the honeycomb structure with [0/90]s ply angle had the best energy absorption effect. The model proposed in this paper has the potential to significantly reduce experimental expenses, while the research findings can provide valuable technical support for design optimization in aerospace vehicle structures. [ABSTRACT FROM AUTHOR]

A honeycomb structure is a sandwich structure widely used in fuselage, among which the hexagonal honeycomb core is the most widely used. The energy absorption characteristics and impedance ability of the structure are the main reasons that directly affect the energy absorption characteristics of the honeycomb sandwich structure. Therefore, it is necessary to study the out-of-plane mechanical properties of the composite honeycomb sandwich structure. Based on the numerical simulation results, the energy absorption characteristics of several composite honeycomb sandwich structures are verified by drop hammer impact experiments. The research shows that the transient energy absorption characteristics of the composite honeycomb sandwich structure are mainly related to the cell size of the honeycomb structure. The smaller the size of the front cell, the stronger the overall impact resistance; the strength of the composite honeycomb sandwich structure exceeds that of 7075 aluminum alloy-NOMEX and carbon fiber-NOMEX honeycomb sandwich structures. In this paper, the energy absorption characteristics of composite honeycomb sandwich structures under different impact energy are compared and studied. The displacement, force and energy curves of energy absorption characteristics related to time variables are analyzed. The difference in protective performance between the composite honeycomb sandwich structure and existing airframe structure is compared and studied. The optimal structural design parameters of composite honeycomb sandwich under low-speed impact of drop hammer are obtained. The maximum energy absorption per unit volume of the designed honeycomb sandwich structure is 171.7% and 229.8% higher than that of the NOMEX-AL and NOMEX-C structures. The 6.4 mm and 3 mm cell sizes show good characteristics in high-speed buffering and crashworthiness. The composite honeycomb sandwich airframe structure can improve the anti-damage performance of the UAV airframe structure, ensure the same thickness and lightweight conditions as the existing honeycomb sandwich airframe structure, and improve the single-core bearing mode of the existing airframe structure. [ABSTRACT FROM AUTHOR]

Sandwich structures are often used as protective structures on ships. To further improve the energy-absorbing characteristics of traditional honeycomb sandwich structures, an energy-absorbing mechanism is proposed based on the gradient folding deformation of lotus root nodes and a leafy stem vein homogenizing load mechanism. A honeycomb sandwich structure is then designed that combines lotus root nodes and leafy stem veins. Four types of peak-nest structures, traditional cellular structure (TCS), lotus root honeycomb structure (LRHS), leaf vein honeycomb structure (LVHS), and lotus root vein combined honeycomb structure (LRVHS), were prepared using 3D printing technology. The deformation modes and energy absorption characteristics of the four honeycomb structures under quasistatic action were investigated using a combination of experimental and simulation methods. It was found that the coupling design improved the energy absorption in the structural platform region of the LRHS by 51.4% compared to that of the TCS due to its mechanical mechanism of helical twisting and deformation. The leaf vein design was found to enhance the peak stress of the structure, resulting in a 4.84% increase in the peak stress of the LVHS compared to that of the TCS. The effects of the number, thickness, and position of the leaf vein plates on the honeycomb structure were further explored. The greatest structural SEA effect of 1.28 J/g was observed when the number of leaf vein plates was four. The highest SEA of 1.36 J/g was achieved with a leaf vein plate thickness of 0.6 mm, representing a 7.3% improvement compared to that of the 0.2 mm thickness. These findings may provide valuable insights into the design of lightweight honeycomb sandwich structures with high specific energy absorption. [ABSTRACT FROM AUTHOR]

In this paper, sorghum and reed, which possess light stem structures in nature, were selected as biomimetic prototypes. Based on their mechanical stability characteristics—the porous structure at the node feature and the porous feature in the outer skin— biomimetic optimization design, simulation, and experimental research on both the traditional hexagonal structure and a hexagonal honeycomb structure were carried out. According to the two types of straw microcell and chamber structure characteristics, as well as the cellular energy absorption structure for the bionic optimization design, 22 honeycomb structures in 6 categories were considered, including a corrugated cell wall bionic design, a modular cell design, a reinforcement plate structure, and a self-similar structure, as well as a porous cell wall structure and gradient structures of variable wall thickness. Among them, HTPC-3 (a combined honeycomb structure), HSHT (a self-similar honeycomb structure), and HBCT-257 (a radial gradient variable wall thickness honeycomb structure) had the best performance: their energy absorption was 41.06%, 17.84%, and 83.59% higher than that of HHT (the traditional hexagonal honeycomb decoupling unit), respectively. Compared with HHT (a traditional hexagon honeycomb decoupling unit), the specific energy absorption was increased by 39.98%, 17.24%, and 26.61%, respectively. Verification test analysis revealed that the combined honeycomb structure performed the best and that its specific energy absorption was 22.82% higher than that of the traditional hexagonal structure. [ABSTRACT FROM AUTHOR]

The shape memory alloy (SMA) can deform pseudo-plastically under external load, based on which a reusable impact energy absorption structure was designed. According to the classical SMA constitutive model, the finite element model for thin-wall structures was established, and the dynamic characteristics such as deformation modes and energy absorption of different forms of honeycomb structures under different impacting velocities, were analyzed, and the optimal energy absorption performance of the SMA structures was obtained. In addition, through comparison of the energy absorption performance of the SMA honeycomb with that of the aluminum honeycomb, the energy absorption of the SMA honeycomb with different structure configurations was different from that of the aluminum honeycomb under different-velocity impacts, with the optimal structure changes. The work provides a reference for the selection and design of the SMA honeycomb structures. [ABSTRACT FROM AUTHOR]