Search

In civil engineering, some soils cause many problems in terms of geotechnical engineering. Especially high plasticity clayey soils cause serious problems in road, airport, pavement and highway construction. Such soils can be stabilized using the chemical stabilization method. Additives such as lime, cement, fly ash and blast furnace slag are generally used in chemical stabilization. In addition, in recent years, there have been many studies on the use of natural and artificial fibers in ground stabilization. In this study, the effects of basalt fiber and mineral additives on the microstructure of clay soil were examined. Microstructures of pure and additively mixed clayey soil specimens were investigated for this purpose. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were performed on compacted soil specimens. In sum, it has been shown that the addition of lime, fly ash, and silica fume is effective in improving the compactivity properties. Pore sizes in SEM images vary depending on additive addition. SEM images showed that the soil particles adhered to the basalt fiber surface, which contributed to the force and friction between the soil particles and the basalt fiber. [ABSTRACT FROM AUTHOR]

Enhancing the dynamic properties of expansive soils using cementitious materials has attracted the attention of many researchers over the past few decades. Supplementary cementitious materials (SCMs) can be used as partial substitutes for cement owing to their pozzolanic activity that further improves the mechanical performance of cement-stabilized soils upon curing. In this study, the effect of cement and zeolite incorporation on the mechanical behavior of expansive clay was quantified using the pressure wave velocity (Vp) indicator obtained from ultrasonic pulse velocity tests performed at different curing times. Furthermore, a polynomial model was developed to establish the relationship between Vp and zeolite replacement levels at specific curing times and cement contents. The results show that a polynomial function captured the decreasing trend of Vp upon the increase in zeolite at curing times below 14 days. Additionally, the developed equation explained the upward trend of Vp owing to the pozzolanic activity of zeolite at later curing times with an accuracy of over 92%. The coefficients of the polynomial model also increased with the increment of the cement percentage which conformed to the consecutive rise in Vp. Ultimately, the polynomial coefficients were expressed in terms of cement content and curing time using the Volterra series. Using this model, the optimum percentage of cement replaced with zeolite (Zopt), the efficiency of using Zopt instead of cement, and the percentage of zeolite replacement to achieve equivalent Vp of cemented clay samples (ZC) were estimated. The findings of this study contribute to promoting geotechnical sustainability by replacing cement with zeolite that has a considerably lower environmental footprint. Clay is a type of soil that can be found in many construction projects. For instance, many roads and buildings' foundations are constructed on clay soils. To ensure the necessary strength of the clay under the main structure, the soil should often be stabilized using adhesive construction materials such as cement. Interestingly, a portion of the cement could be replaced with other minerals not only to improve engineering performance but also to promote sustainability by lowering cement consumption. In this study, the effect of zeolite as a partial replacement for cement on the strength of clay soils was experimentally evaluated. The effect of various design parameters, such as cement replacement level and curing time, on the stability of clays was investigated using an advanced technique called the ultrasonic pulse velocity (UPV) test. Furthermore, a simple mathematical model was proposed based on the experimental results to help engineers design the stabilization plan and timely decide about the next steps of the construction process. [ABSTRACT FROM AUTHOR]

This investigation examines the effect of clamshell ash (CSA) and lime additives on the physico-mechanical characteristics of kaolinite clay soil stabilized at the optimum silica fume content. Laboratory tests were performed to assess plasticity, shrink-swell characteristics, compaction characteristics, unconfined compressive strength (UCS), shear strength characteristics, mineralogical and morphological microstructure characteristics of stabilized soil specimens. The kaolinite clay soil was stabilized at its optimum silica fume content (6%) to produce the highest strength and was altered with three non-identical proportions of clamshell ash and lime (3%-9%). Cylindrical soil specimens, 76 mm in height and 38 mm in diameter, were moulded and treated for curing periods of 1, 7, 14, and 30 days to examine the strength of the altered soil. The findings revealed that, adding clamshell ash and lime significantly alters the plasticity, shrink-swell, maximum dry unit weights, and optimum moisture contents of the silica fume-stabilized soil. In terms of strength, the beneficial effects of CSA and lime additives were found to be more significant with more extended curing periods. Incremental increases in curing periods resulted in further enhancements in UCS, cohesion, and internal friction angle, indicating continued strength development over time. Microstructural analysis using field emission scanning electron microscopy and X-ray diffraction provided insights into the interparticle bonding mechanisms and microstructural changes induced by the addition of CSA and lime. The emergence of cementitious phases and pozzolanic responses between soil particles and stabilizers contributed to the densification and strengthening of the stabilized soil matrix. The findings of this study provide valuable insights into the potential of clamshell ash and lime additives to enhance the engineering properties of kaolinite clay soil stabilized with silica fume. These results have implications for sustainable soil stabilization practices, offering a promising approach to improve the performance of soils for various engineering applications, including construction and geotechnical projects. [ABSTRACT FROM AUTHOR]

Construction of earth fill dams offers a cost-effective solution for various purposes. However, their susceptibility to internal soil erosion, known as piping, poses a significant risk of structural failure and resultant loss of life and property. Soil stabilization emerges as a practical technique to fortify these dams against such threats. This study investigated the impact of lime on the internal erosion properties of clay soils, focusing on CH and ML soil types. Specimens of different lime content were prepared and remolded at 95% relative compaction and optimum moisture content. Hole Erosion tests at varying lime concentrations and curing durations were adapted to conduct the investigation. This investigation aims to optimize lime content and curing time for cohesive soil stabilization against internal erosion. Findings revealed that 2% and 5% of quicklime, by dry weight of the soil, effectively stabilized CH and ML soils, respectively, against internal erosion, with a two-day curing period proving optimal. Furthermore, the addition of lime significantly enhanced erosion rate index and critical shear strength in clay soil, underscoring its efficacy in soil stabilization efforts. [ABSTRACT FROM AUTHOR]

This study investigates the stabilization performance of clayey soil treated with alkali-activated hybrid slag/cement. Sodium silicate (SS) and sodium hydroxide (SH) are used as alkali activators, whereas ground blast furnace slag (GGBS) and ordinary Portland cement (OPC) are used as sources of aluminosilicate. A total of 27 different types of mixtures are used for stabilization. Unconfined compressive strength (UCS) of untreated clay and stabilized soils are performed at immediately, 3-, 7-, 28-, and 90 days curing times under air-dried and wet-cured conditions. In addition, 90-d volume and mass changes in the samples are measured. Stabilized samples with an SS/SH ratio of 1 under air-dried conditions reveal moistening at early curing ages (=28 days); afterward, sodium carbonate crystals appear in these samples at longer curing ages. Geopolymer-treated clayey soil exhibits lower volumetric and mass changes compared with OPC. Most of the stabilized clayey soil with alkali-activated hybrid slag/cement exhibits higher strength compared with OPC under air-dried and wet-cured conditions. [ABSTRACT FROM AUTHOR]