187,825 results
Search Results
2. Study on temperature normalization of frequency-domain dielectric spectroscopy of oil–paper insulation
- Author
-
Zhang, Tao, Shi, Guangrui, Zhang, Nan, Wu, Qian, Zhang, Peilei, Liu, Hao, and Liu, Zheheng
- Published
- 2024
- Full Text
- View/download PDF
3. Developing EFL Students' Multimodal Communicative Competence through Lady Whistledown's Society Papers: A Teaching Proposal
- Author
-
Beatriz P. Rubio-López
- Abstract
This paper focuses on integrating multimodal communication into the English-as-a-foreign-language classroom to enhance the development of students' multimodal communicative competence, multiliteracies, and 21st-century skills. To do so, I compiled a corpus of authentic materials from Lady Whistledown's Society Papers in Julia Quinn's novel "The Viscount Who Loved Me" (2000), her appearances as narrator in the Netflix series "Bridgerton" (2022), and some tweets posted by @Bridgerton. This corpus was used to plan and design a game-based teaching proposal. Finally, the paper offers a critical analysis and suggests how this proposal can feasibly contribute to fostering students' multimodal communicative competence.
- Published
- 2024
4. Structure and properties of carbon fiber paper with gradient porous structure
- Author
-
Li, Li, Wang, Yuyan, Lei, Ting, Xie, Zhiyong, and Liang, Yili
- Published
- 2024
- Full Text
- View/download PDF
5. A deep learning-based approach for performance assessment and prediction: A case study of pulp and paper industries
- Author
-
Jauhar, Sunil Kumar, Raj, Praveen Vijaya Raj Pushpa, Kamble, Sachin, Pratap, Saurabh, Gupta, Shivam, and Belhadi, Amine
- Published
- 2024
- Full Text
- View/download PDF
6. Urea-based fuel cells on paper with micro-watt power generation to drive low power circuits
- Author
-
Krishna, Sai, Lal, Sweta, Shrivastva, Suyash, and Bahubalindruni, Pydi Ganga
- Published
- 2024
- Full Text
- View/download PDF
7. Adsorption enrichment integrated with paper-based devices for detection of trace levels of hexavalent chromium in water samples
- Author
-
Muhammed, Abdellah, Hussen, Ahmed, and Kaneta, Takashi
- Published
- 2024
- Full Text
- View/download PDF
8. Manganese oxide@nanocellulose modified poster paper-based electrode as a novel electrochemical sensor for sensitive determination of paraquat
- Author
-
Thongsomboon, Wiriya, Sonjai, Jutarat, Jakmunee, Jaroon, Lerdsri, Jamras, Reanpang, Preeyaporn, and Upan, Jantima
- Published
- 2024
- Full Text
- View/download PDF
9. Preparation of superhydrophobic cellulose aerogel sponge from waste paper and its application in oil-water separation
- Author
-
Bahraminia, Soheil, Anbia, Mansoor, and Mirzaei, Arezoo
- Published
- 2024
- Full Text
- View/download PDF
10. Preparation of PBT@PP-CNC@cellulose wood pulp paper double-layers fuel filtration materials with high efficiency and high dust holding capacity
- Author
-
Zhao, Yixia, Zhang, Shuaihao, Kang, Weimin, Wang, Shuaishuai, and Li, Yafang
- Published
- 2024
- Full Text
- View/download PDF
11. CeO2 and PEDOT:PSS modified conducting paper for organophosphate pesticide detection
- Author
-
Paneru, Saroj, Sweety, and Kumar, Devendra
- Published
- 2024
- Full Text
- View/download PDF
12. Miniaturized paper-based analytical device for the portable analysis of phyto-cannabinoids in plant and oral fluids
- Author
-
Houtzager, Dymphy, Armenta, Sergio, Herrero-Martínez, José Manuel, and Martínez-Pérez-Cejuela, Héctor
- Published
- 2024
- Full Text
- View/download PDF
13. Fabrication of hydrophobic coatings on paper substrates using silicone oil impregnated silica: a promising sustainable packaging material
- Author
-
Francy, Angitha, Ragi, T. M., Mohamed, A. Peer, and Ananthakumar, S.
- Published
- 2024
- Full Text
- View/download PDF
14. Paper-based fluorescence sensor array with functionalized carbon quantum dots for bacterial discrimination using a machine learning algorithm
- Author
-
Wang, Fangbin, Xiao, Minghui, Qi, Jing, and Zhu, Liang
- Published
- 2024
- Full Text
- View/download PDF
15. Paper-based uric acid assay in whole blood samples by Zn2+ protein precipitation and enzyme-free colorimetric detection
- Author
-
Jin, Xue, Liu, Jia, Wang, Jiaxi, Gao, Mingxia, and Zhang, Xiangmin
- Published
- 2024
- Full Text
- View/download PDF
16. Impact and Flexural Energy Absorption Mechanism of Hybrid Composites Interleaved CF/PA6 Fiber Papers Based On Real-Time Cracks Tracking
- Author
-
Wu, Yuanyuan, Gao, Qian, Chen, Beibei, Wan, Yi, Huang, Weizhao, Tong, Xiaohang, Gu, Bohong, and Takahashi, Jun
- Published
- 2024
- Full Text
- View/download PDF
17. Research on Strengthening Fragile Paper with Polyvinylamine.
- Author
-
Li, Jing, Shi, Meirong, Li, Yuhu, and Fu, Peng
- Subjects
FOURIER transform infrared spectroscopy ,X-ray photoelectron spectroscopy ,NUCLEAR magnetic resonance spectroscopy - Abstract
Paper documents are an important carrier of information related to human civilization, with the reinforcement and protection of fragile paper documents being a key aspect of their protection. This research utilized amphoteric polyvinylamine polymer as a paper reinforcement agent, strengthening the Xuan paper commonly used in paper documents. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), solid-state 13C NMR, and other analytical methods were employed to compare the physical properties, micro-morphology, crystallinity, and aging resistance of the paper before and after reinforcement. Research was conducted on the effects of reinforcement, the aging resistance, and the effects on the fiber structure. The results indicate that polyethylenimine has a filling and bridging effect between the paper fibers. After treatment with polyethylenimine, there was a significant improvement in the folding endurance and tensile strength of the paper. Additionally, the paper maintains a good mechanical strength even after undergoing dry heat and humid aging. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
18. Mapping research in marketing: trends, influential papers and agenda for future research
- Author
-
Ramos, Ricardo, Rita, Paulo, and Vong, Celeste
- Published
- 2024
- Full Text
- View/download PDF
19. Flipped Classroom with Gamified Technology and Paper-Based Method for Teaching Vocabulary
- Author
-
Damar Isti Pratiwi, Sri Wuli Fitriati, Issy Yuliasri, and Budi Waluyo
- Abstract
While gamified technology integration in vocabulary instruction within a flipped classroom has yielded beneficial teaching outcomes, specific studies have raised concerns about potential adverse effects linked to this approach. As a result, conducting a comparative analysis between gamified technology and conventional paper-based methods within the flipped classroom framework has become essential. This analysis aims to foster the development of a targeted teaching approach that adeptly addresses the unique needs of students. This study employed a sequential explanatory research design to examine the effectiveness of flipped classroom with gamified technology and paper-based method in teaching vocabulary to students with different proficiency levels. Quantitative data was gathered from a pretest and a posttest, whilst qualitative data was collected through teachers' guided reflection. Using Academic Word List (300 target words), control groups employed a paper-based, while experimental groups applied gamified technology ("Quizlet," "Kahoot!," "Quizizz," "Socrative," and "Google Form"), which lasted 10 weeks. The participants were 144 non-English major students who took a general English course in the 2nd semester of 2023. Quantitative data analysis ran in SPSS 25 using "Paired Sample t-Test" and "One-way ANOVA." The qualitative data were analyzed using thematic progression. The results showed that gamified technology did not affect students' learning outcomes, while the paper-based method resulted conversely. It revealed that the paper-based method is more effective than gamified technology for students in general, with low proficiency and high-proficiency level. Further, teachers' beliefs admitted distinctive issues that gamified technology was more effective for high-proficiency learners, whereas paper-based was more effective for low-proficiency learners. The difference analysis of quantitative and qualitative data sheds light on discussing threats while implementing gamified technology and possible solutions.
- Published
- 2024
- Full Text
- View/download PDF
20. Optical and Printing Properties of Deinked Office Waste Printed Paper.
- Author
-
Ghanbarzadeh, B., Ataeefard, M., Etezad, S. M., and Mahdavi, S.
- Subjects
OPTICAL properties ,DEINKING (Waste paper) ,PHOTOGRAPHIC printing ,CELLULASE ,PAPER recycling - Abstract
Deinking waste paper is done in various ways, and research on newer methods is also being done. Traditional deinking methods to remove ink from waste printing papers have a relatively high efficiency compared to contact methods, but in non-contact printing such as electrophotographic printing (LaserJet printers and photocopiers) due to Mixing of the ink with the paper texture during the stabilization of the ink with the help of high heat, the traditional deinking methods are less efficient and it is necessary to use newer methods. In this research, enzymatic deinking of office waste paper was done by a commercial cellulase enzyme in a neutral environment. 15 tests were conducted, and optical and printing properties including the paper were investigated. By measuring the reflection before and after printing and measuring the print density after printing, it was determined that the printability of deinked paper is within the desired range. Eric's number was 128 ppm for sample number 8 and 138 ppm for sample number 12, which has decreased compared to the control sample with an Eric number of 571 ppm. Measuring the reflection before and after printing and measuring the print density after printing, show that the printability of decomposed ink paper is in the desired range. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
21. A multi-dimensional analysis of usage counts, Mendeley readership, and citations for journal and conference papers
- Author
-
Tian, Wencan, Fang, Zhichao, Wang, Xianwen, and Costas, Rodrigo
- Subjects
Computer Science - Digital Libraries - Abstract
This study analyzed 16,799 journal papers and 98,773 conference papers published by IEEE Xplore in 2016 to investigate the relationships among usage counts, Mendeley readership, and citations through descriptive, regression, and mediation analyses. Differences in the relationship among these metrics between journal and conference papers are also studied. Results showed that there is no significant difference between journal and conference papers in the distribution patterns and accumulation rates of the three metrics. However, the correlation coefficients of the interrelationships between the three metrics were lower in conference papers compared to journal papers. Secondly, funding, international collaboration, and open access are positively associated with all three metrics, except for the case of funding on the usage metrics of conference papers. Furthermore, early Mendeley readership is a better predictor of citations than early usage counts and performs better for journal papers. Finally, we reveal that early Mendeley readership partially mediates between early usage counts and citation counts in the journal and conference papers. The main difference is that conference papers rely more on the direct effect of early usage counts on citations. This study contributes to expanding the existing knowledge on the relationships among usage counts, Mendeley readership, and citations in journal and conference papers, providing new insights into the relationship between the three metrics through mediation analysis., Comment: 23 pages, 7 figures
- Published
- 2024
- Full Text
- View/download PDF
22. Single-Paper Meta-Analyses of the Effects of Spaced Retrieval Practice in Nine Introductory STEM Courses: Is the Glass Half Full or Half Empty?
- Author
-
Campbell R. Bego, Keith B. Lyle, Patricia A. S. Ralston, Jason C. Immekus, Raymond J. Chastain, Lora D. Haynes, Lenore K. Hoyt, Rachel M. Pigg, Shira D. Rabin, Matthew W. Scobee, and Thomas L. Starr
- Abstract
Background: Undergraduate STEM instructors want to help students learn and retain knowledge for their future courses and careers. One promising evidence-based technique that is thought to increase long-term memory is spaced retrieval practice, or repeated testing over time. The beneficial effect of spacing has repeatedly been demonstrated in the laboratory as well as in undergraduate mathematics courses, but its generalizability across diverse STEM courses is unknown. We investigated the effect of spaced retrieval practice in nine introductory STEM courses. Retrieval practice opportunities were embedded in bi-weekly quizzes, either massed on a single quiz or spaced over multiple quizzes. Student performance on practice opportunities and a criterial test at the end of each course were examined as a function of massed or spaced practice. We also conducted a single-paper meta-analysis on criterial test scores to assess the generalizability of the effectiveness of spaced retrieval practice across introductory STEM courses. Results: Significant positive effects of spacing on the criterial test were found in only two courses (Calculus I for Engineers and Chemistry for Health Professionals), although small positive effect sizes were observed in two other courses (General Chemistry and Diversity of Life). Meta-analyses revealed a significant spacing effect when all courses were included, but not when calculus was excluded. The generalizability of the spacing effect across STEM courses therefore remains unclear. Conclusions: Although we could not clearly determine the generalizability of the benefits of spacing in STEM courses, our findings indicate that spaced retrieval practice could be a low-cost method of improving student performance in at least some STEM courses. More work is needed to determine when, how, and for whom spaced retrieval practice is most beneficial. The effect of spacing in classroom settings may depend on some design features such as the nature of retrieval practice activities (multiple-choice versus short answer) and/or feedback settings, as well as student actions (e.g., whether they look at feedback or study outside of practice opportunities). The evidence is promising, and further pragmatic research is encouraged.
- Published
- 2024
- Full Text
- View/download PDF
23. Feasibility Study on Biodegradable Black Paper-Based Film Solidified Using Cooked Tung Oil.
- Author
-
Wu, Yi, Shi, Yicheng, Zhao, Yudie, and Yin, Yu
- Subjects
BLACK films ,SUSTAINABLE agriculture ,HEAT conduction ,HYDROPHOBIC surfaces ,CONTACT angle ,CARBON-black ,BIODEGRADABLE plastics - Abstract
New biodegradable paper-based films are a hot research topic in the development of green agriculture. In this study, a black paper-based film coated with cooked tung oil with excellent mechanical properties, a hydrophobic surface, high heat transfer and strong weather resistance was prepared by spraying high-pigment carbon black solution on the surface of base paper. The results showed that the surface-solidified oil film had a rough structure produced via the brush coating process using cooked tung oil. The base film of the black paper had a given hydrophobic structure, and the contact angle reached 98.9°. Cooked tung oil permeates into the inside of the paper base, and after curing, it forms a multi-dimensional network film structure. The maximum tensile stress of the black paper base film is about 123% higher than that of the original paper base film. The coloring of carbon black gives the black paper base film a heat conduction effect, and the average heat transfer rate reaches 15.12 °C/s. Cooked tung oil is combined with the paper-based fiber high-toughness layer to form a stable system. The existence of a cured film improves the basic mechanics and hydrophobicity, and the resistance to ultraviolet radiation and hot air is greatly improved. This study provides a feasible scheme for the application of a black paper base film coated with cooked tung oil. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
24. Monitoring of Cleaning Treatments for Paper Heritage with Raman Spectroscopy Mapping.
- Author
-
Botti, Sabina, Bonfigli, Francesca, Mezi, Luca, and Flora, Francesco
- Subjects
RAMAN spectroscopy ,PAPER products ,CLEANING ,SPECTRAL imaging - Abstract
In the field of book heritage, it is important to develop cleaning/disinfecting treatments that can slow down the degradation of paper to prevent evident and irreversible damage. The objectives of the cleaning treatments are to remove external contaminants and oxidation and decomposition products of the paper, but these processes must not modify the unique characteristics of the book heritage resulting in irreversible changes in the structure of the paper. Recently, several innovative cleaning treatments were developed with the aim of being minimally invasive; however, to assess the effect of these treatments on paper, it is necessary to use a diagnostic non-destructive, rapid, and affordable process. In previous work, we used surface scanning Raman spectroscopy to develop a diagnostic protocol able to follow the aging processes of the paper, discriminating between hydrolysis and oxidation. In this paper, we applied this protocol to study the action of different types of treatments (hydrogel and EUV irradiation), evaluating both their effectiveness and impact on paper parameters. The results reported here demonstrate that the developed in operando diagnostic procedure can follow the changes in the paper structure comparing them to the variability due to the intrinsic inhomogeneity of paper, without sample contact in a rapid and effective way. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
25. Reply to Comment by Schilling on their paper 'Optimal and fast confidence intervals for hypergeometric successes'
- Author
-
Bartroff, Jay, Lorden, Gary, and Wang, Lijia
- Subjects
Statistics - Methodology - Abstract
A response to a letter to the editor by Schilling regarding Bartroff, Lorden, and Wang ("Optimal and fast confidence intervals for hypergeometric successes" 2022, arXiv:2109.05624)
- Published
- 2024
- Full Text
- View/download PDF
26. The Prospects for Advanced Processing of Paper Sludge Using Enzymes, Microalgae and Yeast
- Author
-
Dmytriy V. Tarabukin, Elena N. Patova, and Irina V. Novakovskaya
- Subjects
enzymic hydrolysis ,advanсed waste processing ,microbial conversion ,microalgae ,yeast ,paper production waste ,paper sludge ,Forestry ,SD1-669.5 - Abstract
This article presents the information on the valorization of waste generated during the production of tissue paper. The possibility of bioconversion of the polysaccharide part of paper sludge into simple sugars has been evaluated. The options for processing the paper sludge before enzymic hydrolysis to achieve the maximum yield of monosaccharides have been considered. Pretreatment with acids has been found to be a key step before the biocatalytic cleavage of waste polysaccharides. An additional yield of enzymic hydrolysis products after pretreatment with acids has been obtained by pre-extraction of the paper sludge with spirit or acetone. It has been established that the most intense enzymic hydrolysis of readily available fractions of the paper sludge takes place in the first 10–12 hours. Further, the process slows down, probably due to the action of the remaining components of the fillers, as well as an increase in the proportion of the difficult-to-hydrolyze polysaccharide part. In all cases, the proportion of absolutely dry non-hydrolyzed residue has been about 43±2 % of the dry matter of the paper sludge. The main products of enzymic hydrolysis have been glucose and xylose. The resulting sugars have been used for mixotrophic cultivation of the Tetradesmus obliquus and Chlorella vulgaris algae. Yeast strains have been selected for the conversion of monosaccharides from the paper sludge. In a series of experiments on non-sterile yeast cultivation, the Candida utilis PAL D and Debaryomyces hansenii SWING R cultures have turned out to be the most productive (within 2.10±0.14 g of air-dry yeast weight/dm3 per 24 hours). The degree of conversion of hydrolysate sugars has been 70±2 %. Most of the remaining sugars (about 80 %) have been represented by xylose. Complete utilization of the sugars has taken place on the 2nd day when having added an extra nitrogen source to the medium. On the other hand, the spent nutrient medium after yeast separation has been suitable for mixotrophic cultivation of microalgae. It has been revealed that the economic costs of pre-treatment of the paper sludge with nitric acid can be leveled by using the resulting salts as a nitrogen source for cultivating yeast. In doing so, the yield of yeast biomass increases by almost 2 times.
- Published
- 2024
- Full Text
- View/download PDF
27. Comparing urine point‐of‐care tests to screen preeclampsia: Congo‐red dot paper test versus dipstick urinalysis
- Author
-
Liying Wang, Jinsong Gao, Pingping Tang, Huiying Hu, Xiaoxu Chen, Ziyi Chen, and Yin Sun
- Subjects
Congo‐red dot paper test ,dipstick urinalysis ,preeclampsia ,pregnancy ,sensitivity and specificity ,Diseases of the circulatory (Cardiovascular) system ,RC666-701 - Abstract
Abstract To compare the urine Congo‐red dot paper test (CRD) with dipstick urinalysis to screen preeclampsia (PE). A total of 409 paired spot urine samples were obtained prospectively from women with suspected pre‐eclampsia attending for routine hospital visits. Congo‐red dot paper test and dipstick urinalysis were examined and compared to screen pre‐eclampsia. The agreement between the two urinary test is modest (kappa coefficient = 0.28, 95% CI 0.14–0.42). The specificity of CRD was higher than urinalysis (97.4% vs. 90.4%, p
- Published
- 2024
- Full Text
- View/download PDF
28. The Effect of Paper Reading Versus Screen Reading on the Inferential Reading Performance among University ESL Learners
- Author
-
Musharraf Aziz, Ahdi Hassan, and Omar Aljamili
- Subjects
esl learners ,inferential comprehension ,paper reading ,reading mode ,screen reading ,Philology. Linguistics ,P1-1091 - Abstract
Contemporary ESL education focuses on screen-based reading, specifically in the context of university level learners. Also, a sudden shift from paper bound reading activities to screen-based tasks was inevitable in response to COVID-19 outbreak. In this regard, the case of inferential and advanced level reading among the young ESL learners of developing countries appears researchable because of the general low digital literacy of these learners. This study, therefore, aimed to investigate the effect of reading mode shift from paper to screen on the inferential comprehension performance among Pakistani ESL learners at university level. A total of 426 undergraduate learners were sampled from Bachelor of Science program in a well-known university in the city of Lahore, Pakistan. Inferential reading was conceptualized through Bloom’s higher order thinking skills, that is, Analyzing, Evaluating and Creating skills therefore the reading comprehension test was based on these skills. Adopting sequential test administration, first the paper-based reading test, and later the screen-based reading was given. The obtained data were analyzed using Rendell’s XCALIBRE and SPSS V. 26.0. The logit scale descriptives, learner ability (θ), and mean scores demonstrated that the learners performed significantly higher in the paper test as compared to screen test. Moreover, it was found that the effect of reading mode shift was larger in Creating skill. The findings may have significant implications for reading mode selection, enhancement of digital competence and effect of reading mode shift in developing countries with inadequate IT facilitation and digital literacy among ESL learners.
- Published
- 2024
- Full Text
- View/download PDF
29. Co-authorship Network of Hot Papers of the Science Citation Index-Expanded in the Web of Science Core Collection
- Author
-
Marzieh Kohandel Jahromi
- Subjects
co-authorship ,hot papers ,web of science ,wos ,co-authorship networks ,Information resources (General) ,ZA3040-5185 ,Transportation and communications ,HE1-9990 - Abstract
The present study was conducted to draw the co-authorship network of hot papers of science citation index in the Web of Science (WOS) database from 2020 to 2021. This investigation is a descriptive study using a scientometrics approach. This research was conducted using social network analysis indices to visualize the co-authorship networks of hot papers in the science citation index. The structure of the co-authorship network of researchers of hot papers in the field of science consists of 47,045 authors who have contributed to the publication of 3475 hot papers from 2020 to 2021, which indicates the high co-authorship of these authors. Moreover, it was found that among the co-authorship patterns of these researchers, the most significant number of articles during the studied years was related to the five-author collaborations. Moreover, the average Collaboration Coefficient (CC) of the authors of hot papers was higher than 0.80, indicating the authors' strong tendency to produce joint articles. The high collaboration of the authors of hot papers in the science citation index can be one of the reasons for increasing the level of visibility and the potential for using them.
- Published
- 2024
- Full Text
- View/download PDF
30. Paper and cardboard waste in the United States: Geographic, market, and energy assessment
- Author
-
Anelia Milbrandt, Jarett Zuboy, Kamyria Coney, and Alex Badgett
- Subjects
Paper waste ,Cardboard waste ,Municipal solid waste ,MSW ,Waste value ,Landfilled waste ,Environmental technology. Sanitary engineering ,TD1-1066 ,Standardization. Simplification. Waste ,HD62 - Abstract
Reliable data on U.S. paper and cardboard waste by location and type are critical for developing waste-reduction solutions, but detailed geographic analysis is lacking in the literature. In this study, we employ statistical and geospatial methods to assess paper and cardboard waste in the United States by type at the national, state, county, and local levels. Of the estimated 110 million tons of paper and cardboard waste managed domestically in 2019, approximately 56% was landfilled, 6% was combusted, and 38% was recycled. The estimated market value of paper and cardboard lost to landfilling in 2019 was $4 billion, and the estimated losses of embodied energy and combustion energy were equivalent to 9% and 4% of U.S. primary industrial energy consumption, respectively. Associated landfilling fees amounted to almost $4 billion. This study aims to inform efforts to implement beneficial waste-management strategies by policy makers, researchers, businesses, and communities across the United States and to provide a model for similar studies in other parts of the world.
- Published
- 2024
- Full Text
- View/download PDF
31. Therapeutic drug monitoring of clozapine in human serum by high-throughput paper spray mass spectrometry
- Author
-
A. Saatchi, T.M. Zarkovic, S.A. Borden, J. Palaty, and C.G. Gill
- Subjects
Clozapine and norclozapine ,Therapeutic drug monitoring ,Paper spray mass spectrometry ,Tandem mass spectrometry ,High-throughput ,Medical technology ,R855-855.5 - Abstract
Introduction: Monitoring the atypical antipsychotic drug clozapine is crucial to ensure patient safety. This article showcases a high-throughput analytical method for measuring clozapine and its primary metabolite norclozapine (N-desmethylclozapine) in serum using paper spray mass spectrometry (PS-MS). Objectives: This study aimed to assess the viability of a PS-MS method for the rapid measurement of clozapine and norclozapine in human serum samples as an alternative to liquid chromatography mass spectrometry (LC-MS). Methods: Serum samples were processed by protein precipitation followed by deposition of the supernatant containing labelled internal standards onto paper spray substrates mounted in cartridges. Analytes were then analyzed using a triple quadrupole mass spectrometer equipped with a commercial paper spray ionization source. The results obtained from the patient samples were compared to those from a validated LC-MS assay. Results: PS-MS calibrations for clozapine and norclozapine were linear (R2 > 0.99) over five days. Between-run precision was below 8 %, and within-run precision did not exceed 10 %. When compared to a validated LC-MS method, the mean bias for 39 patient samples was −9% for clozapine and −1% for norclozapine, with no outliers. Mass spectrometry ion ratio comparisons indicated no interference for patient samples above the lower limit of quantification. There was less than 7 % change in the measured concentrations of both analytes over five days for samples dried on paper substrates. Notably, virtually no maintenance of the MS source was required during this study. Conclusion: This study illustrates the potential of PS-MS for serum drug monitoring in the clinical laboratory.
- Published
- 2024
- Full Text
- View/download PDF
32. The Technological Impact of Papers Published by Iranian Institutions: A Scientometric Analysis
- Author
-
Nadia Saniee and Homa Arshadi
- Subjects
patent-cited papers ,technological impact ,citespace ,patents ,iran ,Information resources (General) ,ZA3040-5185 ,Transportation and communications ,HE1-9990 - Abstract
Besides scientific impact, papers can also achieve a technological impact that remains less known in the scientific community. Cited papers in the patents are considered as the index to measure the technological impact. This study aimed to analyze the technological impact of Iranian publications using co-authorship and co-word map, their evolution, the journals, and the subject areas of these publications. This applied research focuses on the quantitative study and visualization with a scientometric approach. The research population was all studies (4554 records) that were published during 2011-2020 in one of the Iranian institutions and had been cited by one of the international patents. The data collection tool was the SciVal database. CiteSpace and Excel spreadsheets were used to analyze the data. Of the 4,554 papers cited by the scholarly outputs that have been cited in patents e patents, most of them were published in collaboration with the USA (9%). Islamic Azad University and Tehran University of Medical Sciences (13% each) were the most active Iranian universities. The number of Iranian papers cited in patents had a downward trend from 686 in 2011 to 57 in 2020. RSC Advances journal was the first top journal to publish these papers. Of 27 subject areas, engineering (24.1%) was the first popular subject that patents cite in their publications. The cluster analysis of keywords identified 8 clusters, including “x-ray diffraction,” “animal,” “adult,” “escherichia coli,” “tissue engineering,” “coronavirus infection,” “neural network,” and “methane.” The technological impact of Iranian research has declined in recent years. It is suggested that research policymakers should consider scholarly outputs that have been cited in patents, which, in a way, shows the flow of knowledge to the industry and encourages researchers to produce such papers.
- Published
- 2024
- Full Text
- View/download PDF
33. Hybrid nanogels and their roles in eliminating soot stains from historical paper manuscripts
- Author
-
Mostafa Abdel-Hamied, Haidi Mahmoud Hassan, Yassmine Adel Mohamed, Mai Emad Moustafa Ismail, Yara Farid, Hager Mohamed, Sameh H. Ismail, Mohamed Z. M. Salem, and Rushdya Rabee Ali Hassan
- Subjects
Paper manuscripts ,Soot stains ,Cleaning process ,Rutile ,Zincite ,Magnetite ,Fine Arts ,Analytical chemistry ,QD71-142 - Abstract
Abstract Soot stain from diverse sources is the most common stain that stains historical paper documents found in libraries, museums, and storage facilities. It is believed to be one of the types of deterioration that arises from the contact between stains and paper sheets. Therefore, in the present work, the effectiveness of the synthesized hybrid nanogel consisting of carbopol and nanoparticles (NPs) of ZnO, TiO2, or Fe3O4, in low and high-viscosity forms, for eliminating soot stains from historical paper manuscripts was conducted. The prepared hybrid nanogels were characterized utilizing the TEM, AFM, XRD, DLS, and Zeta Potential techniques. Following preparation, the soot-stained paper samples were heated to 105 °C for 6 days, a process known as accelerated thermal aging. Surface morphology, mechanical properties and the color change of the paper samples were investigated. The prepared hybrid nanogel had a spherical shape with well-defined edges and uniform size, with an average particle diameter ranging from 30 to 35 nm. There was no significant NPs agglomeration seen, suggesting uniform dispersion in the carbopol matrix. Additionally, the prepared gels' crystal structure and phase purity were revealed by the XRD analysis results. Paper fibers were visible in some parts of the treated sample with TiO2/carbopol hybrid nanogel at high-viscosity before aging. Cleaning soot-stained paper samples using high-viscosity Fe3O4/carbopol hybrid nanogel is more successful than using low-viscosity nanogel. the sample treated with high-viscosity ZnONPs/carbopol hybrid nanogel produced the highest total color differences (ΔE) (26.17). The paper sample treated with high-viscosity ZnO/carbopol hybrid nanogel exhibited the maximum tensile strength (61.8 N/mm2) and elongation at break (1.174%). The evaluation of the paper samples both before and after the cleaning process revealed that, the treatment with high-viscosity ZnO/carbopol hybrid nanogel gave the best results in removing soot stains from stained paper samples.
- Published
- 2024
- Full Text
- View/download PDF
34. Enhancing wood functionality: A novel approach with Al2O3 impregnated paper on densified wood surface
- Author
-
Menghong Jiang, Ziling Liu, Aokai Cheng, Shanghuan Feng, Changhua Fang, and Dengyun Tu
- Subjects
Poplar wood (Populus tomentosa carr.) ,Surface densification ,Surface properties ,Al2O3 impregnated paper ,Flooring ,Mining engineering. Metallurgy ,TN1-997 - Abstract
To improve the surface properties of low-density wood, poplar wood was functionalized by laminating Al2O3 impregnated paper onto poplar wood (Populus tomentosa Carr.) via unilateral surface compression. Bonding strength between Al2O3 impregnated paper and wood reached up to 3.08 MPa, meeting commercial grade I requirements for impregnated paper laminated wood flooring. A cross-linked structure between Al2O3 impregnated paper and wood was formed without visible cracks or other defects. Density of the functionalized wood surface increased remarkably and the surface hardness was significantly improved, surpassing that of hardwoods for wood flooring. The functionalized wood surface also exhibited high wear resistance, which reached to the specification for commercial grade I impregnated paper laminated wood flooring. Additionally, the water resistance of the functionalized wood surface was significantly improved through lamination with Al2O3 impregnated paper. The functionalized wood demonstrated high applicability for wood flooring.
- Published
- 2024
- Full Text
- View/download PDF
35. Paper-based biosensors based on multiple recognition modes for visual detection of microbially contaminated food
- Author
-
Jie Li, Keren Chen, Yuan Su, Longjiao Zhu, Hongxing Zhang, Wentao Xu, and Xiangyang Li
- Subjects
Paper-based biosensor ,Microorganism ,Multiple recognition ,Biomarker ,Visual detection ,Food processing and manufacture ,TP368-456 - Abstract
Microbially contaminated food can cause serious health hazards and economic losses, therefore sensitive, rapid, and highly specific visual detection is called for. Traditional detection of microorganisms is complex and time-consuming, which cannot meet current testing demands. The emergence of paper-based biosensors provided an effective method for efficient and visual detection of microorganisms, due to its high speed, all-in-one device, low cost, and convenience. This review focused on 5 biomarkers, namely nucleic acids, proteins, lipopolysaccharides, metabolites, and the whole microorganism of microorganisms. Besides, the recognition methods were summed up in 5 forms, including immunological recognition, aptamer recognition, nucleic acid amplification-mediated recognition, DNAzyme recognition and clustered regularly interspaced short palindromic repeats mediated recognition. In addition, we summarized the applications of paper-based biosensors in the detection of microorganisms thoroughly. Through the exploration of different biomarkers, identification methods, and applications, we hope to provide a reference for the development of paper-based biosensors and their application in safeguarding the food chain.
- Published
- 2024
- Full Text
- View/download PDF
36. Analysis of Stylistic and Grammatical Errors in PhD Students' Research Paper Manuscripts.
- Author
-
Lengálová, Anežka
- Subjects
RESEARCH papers (Students) ,DOCTORAL students ,REPORT writing ,ACADEMIC discourse ,ORTHOGRAPHY & spelling ,NATIVE language ,MANUSCRIPTS - Abstract
The ability to publish research papers is a must for scientists nowadays. Ideally, at the very beginning of their career, young researchers, PhD students, should be instructed in writing research papers and should get feedback on their texts. In this study, the first manuscripts from 22 doctoral students, non-native English speakers, 223 pages were analysed for errors in grammar, spelling, punctuation, and style. For each type of error and each student, the average per page was calculated. The most frequent errors were identified in using articles, formal features, missing information, and the use of inappropriate words. Individual students showed significantly different levels, which reflected their previous language training and the approach (responsibility) to completing the task. The results will be used to modify the course in Academic Writing (more attention paid to the most frequent errors) and individual work with students. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
37. Electrochemical detection of creatinine on Cu/carbon paper electrodes obtained by physical vapor deposition
- Author
-
Gonzalez-Gallardo, Carlos Luis, Morales-Hernández, Jorge, Álvarez-Contreras, Lorena, Arjona, Noé, and Guerra-Balcázar, Minerva
- Published
- 2024
- Full Text
- View/download PDF
38. Evaluating Paper’s Optical Properties after Separate and Combined Use of Nanofibrillated Cellulose with Cationic Starch and Cationic Polyacrylamide
- Author
-
Jafar Ebrahimpour Kasmani, Ahmad Samariha, and Mohammadreza Amiri Margavi
- Subjects
cellulose nanofibers ,cationic starch ,cationic polyacrylamide ,white liner ,packaging paper ,Biotechnology ,TP248.13-248.65 - Abstract
Nanofibrillated cellulose (NFC) and its combined usage with cationic starch and a cationic copolymer of acrylamide were studied in relation to the properties of paper. Independent pulp treatments using additives separately included 0%, 5%, 10%, and 15% refined long fiber pulp, 3 and 6% NFC, 0.75 and 1.5% cationic starch and 0.07% and 0.15% cationic polyacrylamide and combined treatments. Handsheets were made of the above treatments, and finally their optical and microscopic properties were evaluated. Increasing the NFC content to 6% increased the brightness and yellowness of the white liner by 13% and 21%, respectively. The liner opacity was also reduced by 1%. Additionally, increasing NFC by 6% compared to imported long fibers, the brightness and yellowness of the white liner increased 5.44% and 6.3%, respectively. The liner opacity was also reduced by 1%. A 1.5% cationic starch addition to NFC increased the brightness of the white liner by 4.4%, its whiteness increased 1.5%, and its yellowness increased 2.1%. The opacity of the liner was also reduced by 7.1%. The use of NFC and cationic starch can improve the optical properties of the white liner, while imported long fibers may be problematic.
- Published
- 2024
39. Mechanical Properties and Reinforcement of Paper Sheets Composited with Carboxymethyl Cellulose.
- Author
-
Kobayashi, Junya, Kaneko, Masahiro, Supachettapun, Chamaiporn, Takada, Kenji, Kaneko, Tatsuo, Kim, Joon Yang, Ishida, Minori, Kawai, Mika, and Mitsumata, Tetsu
- Subjects
METHYLCELLULOSE ,STRESS-strain curves ,CARBOXYMETHYLCELLULOSE ,BOND strengths ,AQUEOUS solutions - Abstract
The mechanical properties for paper sheets composited with glucose (Glc), methyl cellulose (MC), and carboxymethyl cellulose (CMC) were investigated. The paper composites were prepared by immersing paper sheets in aqueous solutions of these materials and drying at 100 °C for 30 min. The stress–strain curves for these paper composites were measured by a uniaxial tensile apparatus with a stretching speed of 2 mm/min. The breaking stress and strain for untreated paper were 24 MPa and 0.016, respectively. The paper composites demonstrated stress–strain curves similar to the untreated paper; however, the breaking point largely differed for these composites. The breaking strain and breaking stress for the Glc composite slightly decreased and those for the MC composite gradually increased with the concentration of materials composited. Significant increases in the mechanical properties were observed for the CMC composite. The breaking stress, breaking strain, and breaking energy for the 3 wt.% CMC composite were 2.0-, 3.9-, and 8.0-fold higher than those for untreated paper, respectively. SEM photographs indicated that the CMC penetrated into the inner part of the paper. These results strongly suggest that the mechanical improvement for CMC composites can be understood as an enhancement of the bond strength between the paper fibrils by CMC, which acts as a bonding agent. It was also revealed that the breaking strain, breaking stress, and breaking energy for the CMC composites were at maximum at the first cycle and decreased gradually as the immersion cycles increased. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
40. Soil–Water Retention Curve Determination for Sands Using the Filter Paper Method.
- Author
-
Shwan, B. J.
- Subjects
- *
FILTER paper , *SAND filtration (Water purification) , *SAND dunes , *SOIL moisture , *SAND , *CALIBRATION , *SAND waves - Abstract
The filter paper (FP) method, a cost-effective, versatile, and convenient approach, has found extensive application in analyzing fine-grained soils, enabling the successful measurement of a broad spectrum of total and matric suctions. However, using the FP method in sand with a limited range of suction profiles has been notably underrepresented in the existing literature. Therefore, this study investigated the applicability of the contact FP method in establishing soil water retention curves (SWRCs) using five distinct FP calibration curves for 10 poorly graded sands. Among these calibration curves, the one presented by Chandler yielded the highest suction values, which were followed by those of ASTM. Furthermore, the FP results were subjected to fitting with a mathmatical model, which led to the observation that the overall trends in the obtained SWRCs displayed smooth sigmoidal shapes, resulting in a complete and coherent SWRCs. The SWRC results of five sand samples were assessed through validation against the hanging column technique (HCT) results, indicating a high degree of concordance and affirming the suitability of the FP method for sands characterized by a limited suction profile. Notably, the entire range of suction values fell within the 0.01–20 kPa range based on the calibration curves presented by Chandler and ASTM for all the examined sand samples, except sands 9 and 10. Furthermore, the suction values were unobtainable using the two aforementioned calibration curves within the ranges of 0.01–1.47 kPa and 0.01–0.172 kPa. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
41. Synthesis of Water-Dispersible Poly(dimethylsiloxane) and Its Potential Application in the Paper Coating Industry as an Alternative for PFAS-Coated Paper and Single-Use Plastics.
- Author
-
Hamdani, Syeda Shamila, Elkholy, Hazem M., Alford, Alexandra, Jackson, Kang, Naveed, Muhammad, Wyman, Ian, Wang, Yun, Li, Kecheng, Haider, Syed W., and Rabnawaz, Muhammad
- Abstract
Polyethylene-, polyvinylidene chloride-, and per- and polyfluoroalkyl substance-coated paper generate microplastics or fluorochemicals in the environment. Here, we report an approach for the development of oil-resistant papers using an environmentally friendly, fluorine-free, water-dispersible poly(dimethylsiloxane) (PDMS) coating on kraft paper. Carboxylic-functionalized PDMS (PDMS-COOH) was synthesized and subsequently neutralized with ammonium bicarbonate to obtain a waterborne emulsion, which was then coated onto kraft paper. The water resistance of the coated paper was determined via Cobb60 measurements. The Cobb60 value was reduced to 2.70 ± 0.14 g/m
2 as compared to 87.6 ± 5.1 g/m2 for uncoated paper, suggesting a remarkable improvement in water resistance. Similarly, oil resistance was found to be 12/12 on the kit test scale versus 0/12 for uncoated paper. In addition, the coated paper retained 70–90% of its inherent mechanical properties, and more importantly, the coated paper was recycled via pulp recovery using a standard protocol with a 91.1% yield. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
42. Gellan residues on paper: quantification and implication for paper conservation
- Author
-
Ute Henniges, Irene Brückle, Hajar Khaliliyan, and Stefan Böhmdorfer
- Subjects
Gellan gel ,Rigid gel ,ATR-FTIR ,Acid methanolysis ,Residues ,Paper conservation ,Fine Arts ,Analytical chemistry ,QD71-142 - Abstract
Abstract Gels prepared from the polysaccharide gellan are used for aqueous poulticing treatments in paper conservation when the application of water must be restricted. Optimal use of the rigid, yet shapeable gel requires direct contact with the paper surface, which carries the risk of gel residues on the treated surface. We used acid methanolysis as a destructive analytical method to detect rhamnose as a component of gellan, which was undetectable with ATR-FTIR spectroscopy. We show that there is a significant probability of leaving gellan residues on the paper. Conservators should be aware of this potential side effect when considering the use of gellan poultices in direct contact with paper objects.
- Published
- 2024
- Full Text
- View/download PDF
43. Efficient simultaneous determination of baicalein and luteolin based on a carbon fiber paper electrode modified with CuO/ZnO-CCNT ternary nanocomposite
- Author
-
Zhang, Zhiheng, Fan, Ying, Wang, Xiaoying, Tu, Haoyu, Jiang, Jianzhang, Zhang, Chengyan, Zhao, Xinhui, Ma, JuanJuan, Wang, Mingyan, and Xu, Ruibo
- Published
- 2024
- Full Text
- View/download PDF
44. Size Press Practices and Formulations Affecting Paper Properties and Process Efficiency: A Review
- Author
-
Martin A. Hubbe
- Subjects
film press ,blade-metering ,starch ,viscosity ,hold-out ,paper stiffness ,paper strength ,Biotechnology ,TP248.13-248.65 - Abstract
Size presses on paper machines are used to apply a solution of a polymer – usually starch – to the surface of the sheet and thereby to increase the stiffness, surface strength, and printing quality of the product. This article reviews publications dealing with the size press equipment, the materials, and factors affecting both the operating efficiency and attributes of the resulting paper. The emergence of film-press equipment (e.g. blade-metering size presses) in the 1980s has greatly decreased the frequency of web breaks and increased productivity. Starch technology at the size press, though relatively mature, continues to evolve. By adjustment of starch attributes, solids levels, and incorporating other additives, modern papermakers can tune size press outcomes to meet a range of paper product requirements, including strength, hydrophobicity, and the reduction of air permeability. By application of various synthetic polymers, mineral particles, and even nanocellulose in combination with starch or other base polymers, there is potential to extend the technology to meet a range of future needs for paper products.
- Published
- 2024
45. Fiber Estimation From Paper Macro Images via EfficientNet-Based Patch Classification
- Author
-
Naoki Kamiya, Yu Yoshizato, Yexin Zhou, Yoichi Ohyanagi, and Koji Shibazaki
- Subjects
EfficientNet ,macro image ,nondestructive paper analysis ,paper fiber ,Electrical engineering. Electronics. Nuclear engineering ,TK1-9971 - Abstract
In the field of paper conservation and archival research, identifying the raw materials of paper is important to elucidate its history and culture. As the most basic element of the raw materials for paper, fibers have not been sufficiently investigated. In this study, we propose a nondestructive method for estimating paper fibers from macro photographs ( $4000\times3000$ pixels) captured using a digital camera. The proposed method consists of background patch (500 pixels per side) detection (BPD), wherein background regions with no text are identified; patch fiber classification (PFC), wherein background patches obtained after BPD are analyzed for fiber classification; and paper fiber estimation (PFE), wherein macro images obtained after PFC are analyzed for fiber estimation. BPD and PFC are employed to perform patch-based classification on segmented macro images, which are reconstructed during PFE to obtain the final fiber estimation results. We performed experiments using 1337 macro images (64176 patches) to evaluate the fiber estimation accuracy for kozo, mitsumata, and gampi via three-fold cross-validation. The average fiber classification accuracy for patch images was observed to be 79.1%; accordingly, the average fiber estimation accuracy for macro images was 85.8%. Experimental results indicated that PFE can be realized in a nondestructive manner on macro images of paper captured using a digital camera.
- Published
- 2024
- Full Text
- View/download PDF
46. Impact of Air Jet Impingement Technology on the Strength of Tissue Paper
- Author
-
Mariusz Reczulski, Piotr Pospiech, Kinga Troszczyńska, and Maria Bieńkowska
- Subjects
tissue paper ,impingement air jets ,tensile strength of paper ,Biotechnology ,TP248.13-248.65 - Abstract
Impinging air jets can be used to dewater, heat, and dry the web of tissue paper. High velocities of the air jets degrade the paper, and appropriate adjustments to the jet velocity and the distance of the nozzle from the surface of the wet web are crucial to obtain the highest quality product. This work investigated the correlation between the velocity of the air jet and the strength of paper subjected to the impingement method. Papers with an initial moisture content of 20% and various pulp mixes were tested, and the physical properties of papers were explored. After impinging an air jet, different tensile strength limits were obtained in the machine and cross directions. The paper had lower apparent density and higher roughness compared to classical pressing. The dependence of tensile strength and roughness on the fibers composition also was determined. Increasing the amount of eucalyptus fibers in impingement dewatered paper resulted in a decrease in its tensile strength and roughness. The value of elongation before breaking was the highest for softwood papers after the impingement method. The maximum velocity of an air jet that can be used to dewater or dry paper without the risk of damage to the papers was determined.
- Published
- 2024
47. Chromatographic analysis of natural dyes in mediaeval Islamic paper
- Author
-
Hassan Ebeid, Fabiana Di Gianvincenzo, Irena Kralj Cigić, and Matija Strlič
- Subjects
Natural dyes ,HPLC–DAD ,Dyeing ,Islamic paper ,Quasi-Islamic paper ,Fine Arts ,Analytical chemistry ,QD71-142 - Abstract
Abstract Numerous natural dyes were used to dye mediaeval Islamic paper from the tenth to the nineteenth century, using a variety of techniques. The objective of this research is to develop an analytical method using high performance liquid chromatography with diode array detection (HPLC–DAD) to identify natural dyes in forty historical Islamic paper manuscripts from two collections. In addition, novel information was obtained from original treatises containing recipes for dyeing paper and the chronological use of dyes in dyeing mediaeval Islamic paper between the tenth and seventeenth centuries. The results show that thirty-four of the forty manuscripts examined contained dyes. Six natural dyes were detected, including henna, madder, lac, safflower, turmeric, and weld. This is the first study aimed at developing a method for determining various natural dyes in Islamic paper from a wide historical and geographical range in the mediaeval time and to fill significant gaps in the technical and historical knowledge of papermaking.
- Published
- 2024
- Full Text
- View/download PDF
48. Fully printed ethanol transparent paper sensor based on ZnO/rGO nanocomposites
- Author
-
Liu, Haixin, Peng, Linghui, Li, Di, and Shen, Wenhao
- Published
- 2024
- Full Text
- View/download PDF
49. INVESTIGATION OF WASTE BIOMASS ASH FROM PAPER INDUSTRY.
- Author
-
Serafimova, Ekaterina, Manoylova, Asya, and Stoyanova, Vilma
- Subjects
- *
PAPER industry , *BIOMASS , *WASTE treatment , *WASTE paper , *WOOD ash , *FLY ash - Abstract
The main part of companies in Bulgaria are built, however in the 70s, and upgraded last decade. The country supplies around 80 % of its supplies of paper, paperboard and pulp with own production. Integrated treatment of wastes is a priority for realizing closed life cycle of materials. The aim of the present work is to investigate the composition and other important characteristics of biomass wood ash wasted from paper industry. The correlations and associations among the chemical characteristics are also studied to find some basic trends and important relationships between two similar wastes from different enterprises. It was proved that all samples taken contained Ba, Cr, Mn, Ni, Co, Al, Fe, Cu and Zn far below the legal limits for such type of products. A product has a certain anti-acidic effect. The other positive result was that the content of iron is between 34 to 60 mg per 1 kg dry waste. The microscopic photos confirmed that the particles are close to the nano-size materials. The content of the elements C, N, H is in good quantities and ratios, which is a prerequisite for their use as a soil improver. By the results of this study, it was confirmed that all samples produced as a result of the thermal treatment and final low water content achieved are free from pathogen microorganisms and different weed seeds, affecting the yield and soil sustainability. That allows determining the optimal ratio between the used components with a view to obtain products with desired thermal stability and physico-chemical properties as soil improvers. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
50. Effect of Polyhydroxybutyrate and Ethyl Cellulose for Barrier Coating of Kraft Paper.
- Author
-
Dong Gun Lim, Yong Ju Lee, Ji Min Lee, Jae Hyeop Kim, Tai Ju Lee, and Hyoung Jin Kim
- Subjects
KRAFT paper ,POLYMER blends ,POLYHYDROXYBUTYRATE ,ETHYLCELLULOSE ,SURFACE coatings ,BOND strengths ,TENSILE strength ,3-Hydroxybutyric acid - Abstract
Poly(3-hydroxybutyrate) (PHB), a biodegradable polymer, has been studied as a substitute for petroleum-based polymers used for barrier coating to improve the barrier and mechanical properties of paper. In this study, ethyl cellulose (EC), a cellulose derivative, was used to prepare a polymer blend for enhancing the barrier properties of PHB. The prepared PHB/EC blend was then applied as a paper coating material. Additionally, the barrier and mechanical properties of the PHB/EC blend-coated paper based on the PHB/EC mixing ratio and coating weight were analyzed. The results showed that the EC could act as a binder for the PHB/EC blendcoated paper. Consequently, the PHB/EC blend-coated paper exhibited significant improvements in mechanical and barrier properties, including a substantial increase of over 100% in internal bond strength, more than 20% in tensile strength, exceeding 60% enhancement in water resistance, and a remarkable increase of over 90% in air permeability. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.