Search

The emerging tribovoltaic nanogenerators (TVNGs) has garnered considerable attention in recent years owing to its higher power density, but it is still limited by unstable output, mismatched impedance, and lower charging speed. Herein, a power‐managed GaN‐based TVNG is first proposed and a self‐powered wireless temperature monitoring system (SWTMS) is developed. The energy backflow from transition capacitor to TVNG is effectively suppressed by applying a high‐voltage‐resistant diode. Benefiting from the combination of the maximum power point tracking (MPPT and the buck converter, an autonomous power management unit (PMU) is designed. The internal impedance of TVNG with PMU decreases by ten times and the charging speed of capacitor increases by 7.18 times compared to those without PMU. Moreover, 100 LEDs and six parallel thermohygrometers can be constantly powered. The wireless temperature monitoring in industrial environments without external power supply is demonstrated through the developed SWTMS. This work proposes an effective power management strategy for TVNG with high output voltage, which exhibits great potential to promote the development of self‐powered sensors and Industrial Internet of Things (IIoT). [ABSTRACT FROM AUTHOR]

The tribovoltaic effect raises an emerging semiconductor energy technology and silicon‐based tribovoltaic nanogenerator (Si‐TVNG) has aroused great attentions. However, the electrical output of Si‐TVNG is extremely unstable due to its complicated mechanism. Here, a competitive mechanism between the built‐in electric field (BEF) and the interfacial electric field (IEF) is proposed to determine the current direction and magnitude of the Si‐TVNG. The results indicate that the natural oxide layer, load pressure, and resistivity of Si significantly affect the IEF and BEF. The natural oxide layer can store surface charges by contact electrification, resulting in a IEF dominant carriers transport process. Conversely, lower resistivity and higher load pressure can reduce the contact resistance, thereby decreasing the surface charges caused by contact electrification and leading to a BEF dominant carrier transport process. This work contributes to deeper understandings of the tribovoltaic effect and further clarifies the theoretical mechanisms of carrier excitation and directional transport. [ABSTRACT FROM AUTHOR]

As an emerging technology to convert environmental high‐entropy energy into electrical energy, triboelectric nanogenerator (TENG) has great demands for further enhancing the service lifetime and output performance in practical applications. Here, an ultra‐robust and high‐performance rotational triboelectric nanogenerator (R‐TENG) by bearing charge pumping is proposed. The R‐TENG composes of a pumping TENG (P‐TENG), an output TENG (O‐TENG), a voltage‐multiplying circuit (VMC), and a buffer capacitor. The P‐TENG is designed with freestanding mode based on a rolling ball bearing, which can also act as the rotating mechanical energy harvester. The output low charge from the P‐TENG is accumulated and pumped to the non‐contact O‐TENG, which can simultaneously realize ultralow mechanical wear and high output performance. The matched instantaneous power of R‐TENG is increased by 32 times under 300 r/min. Furthermore, the transferring charge of R‐TENG can remain 95% during 15 days (6.4 × 106 cycles) continuous operation. This work presents a realizable method to further enhance the durability of TENG, which would facilitate the practical applications of high‐performance TENG in harvesting distributed ambient micro mechanical energy. [ABSTRACT FROM AUTHOR]