Search

Unburned carbon from fly ash and its graphitization products (at temperatures of 2400 and 3000°C) were tested using scanning electron microscope (SEM), X-ray diffraction (×RD) and micro-Raman spectroscopy. The same tests were also carried out for synthetic and natural graphite. Various morphological forms of products with a high degree of graphitization, such as spheroidal graphite, hexagonal plates, column plates, and jagged-edge films were identified in the sample of unburned carbon annealed at 3000°C. The product of thermal treatment at the temperature of 3000°C has the interlayer spacing d002 value characteristic for semigraphite. With increasing temperature the number of crystallites in stack N, their height Lc002 and aromaticity fa increases. The degree of G graphitization of annealed samples increases more than twice with increasing temperature. With the increase of the temperature the aliphatic chains are decomposed and the aromatic systems are reconstructed, so the degree of internal structure order increases. The Raman examinations showed that the structural parameters determined for the graphite and carbonizate samples after thermal treatment at the temperature of 3000°C are equal in the standard deviation range. [ABSTRACT FROM AUTHOR]

The current study demonstrates the effect of Ni-substitution on the structural, dielectric and ferroelectric properties of Ba0.90Sr0.10Ti1-xNixO3 (where x = 0.000, 0.005, 0.015 and 0.025) ceramics, synthesized by solid-state reaction approach. A pure perovskite phase with tetragonal structure has been confirmed by X-ray diffraction (XRD) analysis. Scanning electron microscope (SEM) images revealed change in microstructure. The dielectric behavior of the prepared ceramics was investigated as a function of temperature (30–150°C) at different frequencies. The results indicate that there is an increase in dielectric constant (ϵRT) and low dielectric loss (tanδRT) were obtained at room temperature by substitution of Ni2+ ions in BST ceramics, offering a promising material for capacitor applications at room temperature. Room temperature P-E loops were recorded at different applied electric fields and typical hysteresis loops were obtained. Improvement in the values of Pr and Pmax was observed by substitution of Ni2+ ions. [ABSTRACT FROM AUTHOR]

This study investigates the optical and structural properties of nitrogen-doped Carbon Quantum Dots (NCQDs) on Titanium dioxide (TiO2). We synthesized the NCQDs via direct pyrolysis using varying amount of nitrogen precursor. We used a UV-visible, Fluorescence and Fourier Transform Infrared spectrophotometer, X-ray diffractometer (XRD), and Scanning Electron Microscope (SEM) to probe the samples. The introduction of nitrogen enhanced the intrinsic activities and electron dynamics of the CQD films, leading to improved confinement, charge extraction, and light harvesting. The optical response of the NCQDs strongly hinged on the nitrogen doping content. Sensitizing different amounts of NCQDs on TiO2 surface reduced their bandgap energies. XRD analysis confirms the preservation of the TiO2 anatase phase nanoparticle after the introduction of NCQDs, with no substantial changes to the crystal lattice and phase purity of the resulting photoanodes, indicating the presence of NCQDs on the surface. However, the deposition of NCQDs decreased the crystallite size. SEM images show well-dispersed morphologies with non-clustered NCQDs films. NCQDs can serve as promising photosensitizers in photovoltaic devices. [ABSTRACT FROM AUTHOR]