Search

Sensitizers are used to prepare photosensitive materials for ink-printing and thermal-recording media. Typical sensitizers contain an aromatic ring and exhibit aryl hydrocarbon receptor-mediated activity. They can accumulate in aquatic biota, leading to the disruption of ecosystems. Effluent from paper recycling plants has been identified as a source of contamination, and the presence of sensitizers in toilet paper may represent a new source of contamination in aquatic environments. To examine possible sources of contamination by sensitizers, this study investigated the levels of sensitizers in recycled toilet paper. We also studied the prevalence of sensitizers in rivers receiving effluents from sewage treatment plants in Japan, from 2020 to 2022. We detected eight sensitizers and related compounds in both toilet paper and river water samples; their total concentrations ranged from 0.78 to 34 µg/g (mean: 12 µg/g) in toilet paper and 58–1167 µg/L (median: 77 µg/L) in water. In the water samples, sensitizers were partitioned between liquid and suspended solid phases, and in suspended solids, sensitizers accounted for an average of 42% of the total. Correlation analysis showed a high correlation between sensitizer composition in the water from a river receiving sewage treatment plant effluents and toilet paper. Since these compounds were also detected in the river water analyzed in this study, toilet paper should be considered a novel source of sensitizers contamination in sewage treatment systems. [ABSTRACT FROM AUTHOR]

Background: The mobile device diffusion has increasingly highlighted the opportunity to collect patient-reported outcomes (PROs) through electronic patient-reported outcomes measurements (ePROMs) during the clinical routine. Despite the ePROMs promises and advantages, the equivalence when a PRO measure is moved from the original paper-and-pencil to the electronic version is still little investigated. This study aims at evaluating equivalence between PROMs and ePROMs self-administration in people with multiple sclerosis (PwMS); in addition, preference of self-administration type was evaluated. Methods: The Manual Ability Measure-36 (MAM-36) and Fatigue Severity Scale (FSS) were selected for the equivalence test. The app ABOUTCOME was developed through a user-centered design approach to administer the questionnaires on tablet. Both paper-and-pencil and electronic versions were randomly self-administered. Intrarater reliability between both versions was evaluated through the intraclass correlation coefficient (ICC, excellent for values ≥ 0.75). Results: Fifty PwMS (35 females) participated to the study (mean age: 54.7±11.0 years, disease course: 27 relapsing-remitting and 23 progressive; mean EDSS: 4.7±1.9; mean disease duration: 13.3±9.5 years). No statistically significant differences were found for the means total scores of MAM-36 (p = 0.61) and FSS (p = 0.78). The ICC value for MAM-36 and FSS was excellent (0.98 and 0.94, respectively). Most of participants preferred the tablet version (84%). Conclusion: The results of the study provide evidence about the equivalence between the paper-and-pencil and electronic versions of PROs administration. In addition, PwMS prefer electronic methods rather than paper because the information can be provided more efficiently and accurately. The results could be easily extended to other MS PROs. [ABSTRACT FROM AUTHOR]

Paper is a material that is used in many areas of everyday life. The development of paper with special and environmentally friendly properties will contribute to it being used differently than before. In this work, we present a simple, fluorine-free and low-cost method to prepare a multifunctional paper coating with TiO2 nanoparticles modified with 3-aminopropyltriethoxysilane (KH550) and polydimethylsiloxane (PDMS). The effects of the content of precursors such as titanium isopropoxide (TTIP) and PDMS on the wettability, microstructure and durability of the coating were investigated. The result showed that the coated paper exhibited excellent superhydrophobicity and self-cleaning properties with a water contact angle (WCA) of 162.7° and a water sliding angle (WSA) of 2.5°. In addition, the coated paper showed excellent oil/water separation with over 98% after 10 test cycles and high mechanical resistance with an abrasion resistance of 0.26% weight loss after 20 abrasion cycles using the Taber abrasion test (ASTM D4060) with wheel type CS-10. The results of this study indicate a possible method for producing fluorine-free multifunctional paper, which has the potential to expand the application versatility of the material. [ABSTRACT FROM AUTHOR]

In this work, solid-surface fluorescence spectra of Rhodamine B (RhB) and fluorescein (FLU), two extensively used fluorophores, were studied and their concentrations were semi-quantitatively determined using the three-dimensional excitation–emission matrix (3D-EEM) data. In order to measure the solid fluorescence spectra, a trace amount of fluorophores was physically adsorbed on a piece of filter paper as a fluorescent paper, and the fluorescence spectra were recorded from the surface of the fluorescent paper instead of the inner parts of the solution. The spectral measurement was performed utilizing a routine spectrofluorimeter designed to measure the fluorescence of solution only by placing the fluorescent paper in a simple handmade holder at an adjusted incident angle of radiation. The results revealed a significant increase in the fluorescence intensity of the fluorescent paper strip compared to the solution phase. Moreover, in the RhB–FLU paper strip the forster resonance energy transfer was observed between FLU and RhB, similar to the observed phenomenon in the solution phase. For quantifying fluorophores, the EEM data were successfully resolved by applying multivariate partial least squares and parallel factor analysis (PARAFAC) modeling, and the results were compared with the univariate method. This study may provide a general guideline in further developing the solid fluorescence measurement of concentrated solutions or solid samples that have fluorescence measurement limitations such as high self-absorption and highly scattered spectra by using a conventional spectrofluorimeter, and also of biological samples where a trace amount of the analyte is available and high sensitivity is required. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is critical to global industrial and economic development. Recently, India's pulp and paper industries have been facing severe competitive challenges. The challenges have impaired the environmental performance and resulted in the closure of several operations. Assessment and prediction of the performance of the Indian pulp and paper industry using various parameters is a critical task for researchers. This study proposes a framework for performance assessment and prediction based on Data Envelopment Analysis (DEA), Artificial Neural Networks, and Deep Learning (DL) to assist industry administration and decision-making. We presented a case study based on eight industries to demonstrate the methodology's applicability. This study analyses and predicts industry performance based on sample data observations over 30 years. The result suggests the DEA-DL-based efficiency prediction has an overall MSE of 0.08 compared with the actual efficiency. Furthermore, the efficiency rankings are compared between the three techniques. The results suggest that the integrated DEA-DL method is primarily accurate in most scenarios with the actual values. The findings of this study provide a comprehensive analysis of environmental performance for policymakers. [ABSTRACT FROM AUTHOR]

In this paper, by a simple hydrothermal method vertically aligned ZnO nanorod arrays were grown on the carbon fiber paper (CFP) and then through a facile chemical bath deposition method CuO nanosheets were loaded on ZnO nanorod arrays, following by thermal spraying method, carboxylated carbon nanotubes (CCNTs) were successfully integrated with CuO/ZnO@CFP to form a binder-free CuO/ZnO-CCNT@CFP sensor. The sensor shows enhanced sensing activity for baicalein and luteolin determination due to the improved structural integration and synergism of different electrode material components. Remarkably, the CuO/ZnO-CCNT@CFP sensor showed good linear relationships over wide concentration ranges of 0.03–0.70 µM and 0.70–20 µM for baicalein and 0.03–0.45 µM and 0.45–8.5 µM for luteolin detection, with the detection limits of 1.7 nM for baicalein and 0.5 nM for luteolin, respectively. More importantly, the CuO/ZnO-CCNT@CFP sensor was utilized in the simultaneous determination of baicalein and luteolin, delivering linear ranges of 0.4–14 µM (baicalein) and 0.2–6 µM (luteolin) with the limit of detection of 0.05 µM and 0.03 µM, respectively. In addition, the developed CuO/ZnO-CCNT@CFP electrode was further investigated to detect baicalein and luteolin in traditional herbal medicine samples, showing satisfied results in comparison with analytic results from high performance liquid chromatography. [ABSTRACT FROM AUTHOR]

Improving paper characteristics through natural and cost-effective fillers is a massive issue in the paper industry. In the process of manufacturing paper, inorganic and organic fillers are utilized. Organic fillers are only appropriate for specific applications, and their expensive cost has limited their use. Here, various concentrations of sugarcane press mud (SPM) waste were applied to obtain pure calcium oxide nanoparticles (CaONPs) after the calcination to use as a potential filler in the papermaking by mixing the CaONPs at various ratios (5, 10, 15, and 20%), and paper properties have been investigated. Transmission electron microscopy (TEM), selected area electron diffraction (SAED), scanning electron microscope (SEM), and energy-dispersive X-ray spectroscopy (EDX) were utilized to characterize the CaONPs produced. The finding reveals that the influence of nano CaO fillers filled at different ratios (5, 10, 15, and 20%) on tensile, tear index, porosity, and smoothness was slowly decreased when increasing the content of nano filler to 35.9, 55.0, 565.7, and 260.3 at (0%) decrease to 30.7, 42.4, 381.6, and 188.4 at (20%), respectively. Also, opacity and brightness were increased from 93.0 and 71.7 at (0%) to 99.0 and 72.3 at (20%), respectively. The previous results revealed that the CaONPs at (20%) represent the optimal owing to the small particle size of CaONPs is satisfactory for provoking the prosperities of paper. [ABSTRACT FROM AUTHOR]

Holocellulose fibers provide great potential to make paper with high performance. However, inappropriate reaction conditions may limit its improvement in paper performance due to the lack of sufficient research data. In this work, paper is prepared from the birch holocellulose fibers based on peracetic acid treatment and the papermaking process. The features of resulting holocellulose fibers are evaluated for different peracetic acid treatment conditions such as temperature and time. It reveals that high temperature and long treatment time lead to the degradation of hemicellulose/cellulose and the destruction of fibers, which further results in the poor mechanical performance of paper. By optimization for the treatment condition of holocellulose fibers, the corresponding paper exhibits the highest tensile strength (93 MPa), good bursting strength (601 kPa), and tearing strength (647 mN). The determination of optimum conditions will provide guidelines for the industrial production of holocellulose fibers and paper. [ABSTRACT FROM AUTHOR]