Search

Microplastics (MPs) are one of the major substantial pollutants in the environment and are stored in sediments worldwide, especially in marine environments. This study shed light on the abundance, distribution, sources and chemical composition of MPs present in the surface sediments collected from the shelf part of the southeast coast of India, Bay of Bengal. A total of twenty-seven surface sediment samples were collected to study MPs pollution. The abundance and morphological characteristics of MPs were determined by counting using an Olympus SXZ7 stereo microscope. Raman spectroscopy analysis was used to identify the polymer type of the MPs. The average abundance of MPs in the study area is 460±275 MPs/kg in dry sediment. Regarding colour, transparent particles were predominant (46.42%), followed by blue, green, brown, etc. With respect to particle shape and size, fibres and 500-µm sized MPs are abundant. Polypropylene (PP), polyethylene (PE), polyethylene terephthalate (PET), high-density polyethylene (HDPE), low-density polyethylene (LDPE) and polystyrene (PS) are the polymer types characterised in the study area. The higher abundance of MPs in the study area can be attenuated to human interruptions, viz., tourism, fishing and inappropriate sewage disposal in the marine environment. In addition to this, population density also plays an important role in providing MPs to the marine environment. This study provides the most valuable data to extrapolate the research for mitigating MP pollution in oceans. It also informs mankind about their disastrous activities on the marine environment, which is expected to recuperate quickly and negatively impact human health and the functionality of the marine system. [ABSTRACT FROM AUTHOR]

Microplastics, an emerging contaminant, are widespread in oceans around the world, and rivers are the key conveyors of these pollutants into the oceans. There exists a dearth of available data pertaining to seasonal fluctuation, spatial distribution and risk assessment of microplastics in rivers extending from upper reaches to the lower reaches. The collection of such data is of utmost importance for the purpose of formulating beneficial management strategies for riverine microplastics. In order to bridge this research gap, an investigation was made in the Periyar River in Kerala, India, which is exposed to anthropogenic stress and is at risk of microplastic pollution. A total of eighteen sites (six sites each from downstream, midstream and upstream) along the 244 km of the river were investigated across three seasons in a year. The study revealed a discernible pattern in the spatial distribution of microplastic concentrations, wherein there was a rise in abundance from the upstream to midstream and then a sudden increase of abundance along the downstream regions towards the lower reaches. The highest mean microplastic abundance of 124.95 items/L was obtained during the monsoon season followed by post-monsoon season i.e. 123.21 items/L and pre-monsoon i.e. 120.50 items/L. The predominant forms of microplastics were found to be fibres, fragments and filaments. Most prevalent polymer types acquired were polyethylene (PE) and polypropylene (PP). Pollution hazard index (PHI) and pollution load index (PLI) were also evaluated to assess the water quality of this river. The findings of this study conclude that the Periyar River is polluted with microplastics throughout its course and offer significant insights into the detection of microplastic origins in river systems and lend support to the implementation of potential measures aimed at mitigating their impact. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) are gaining global attention in recent years due to its widespread distribution and potential health impacts. The present study focuses on the distribution and characterisation of microplastics in the sediments and its transfer into the organisms living in Kavvayi and Kumbla backwaters of Northern Malabar region, Kerala, India. MP isolation procedures including density separation, organic matter digestion, and membrane filtration followed by visual and spectral analyses using optical microscope and confocal Raman spectroscopy have been utilised for the microplastic evaluation. Microplastics of size range up to 1 μm was analysed, and the presence of MPs was detected in all samples with an average abundance of 99.5 ± 69.43 particles/kg and 96.57 ± 29.96 particles/kg in Kavvayi and Kumbla backwaters respectively. Raman spectral analysis confirmed that almost 50% of MPs to be synthetic elastomers with the remaining half encompassed by polyamide, polyethylene, polyester, polyurethane, and polypropylene. Higher abundance of MPs in the edible aquatic organisms like clams, prawns, and fishes confirmed the transfer of MP from the environment into living organisms envisages the need of further investigation on toxicological impacts and management strategies. [ABSTRACT FROM AUTHOR]

Vegetable oils are a highly promising alternative to produce various lubricants, owing to their biodegradability and eco-friendliness. In comparison to mineral oil, these oils possess a higher flash point and viscosity index, along with superior lubricating properties. Additionally, most of the vegetable oils are easily accessible in local markets in India. However, their industrial application is limited by poor thermal and oxidative stability, which can be addressed through chemical modification, the addition of appropriate additives, or by blending these oils. Greases, characterized by their semi-solid consistency, are widely used lubricants. Most of the grease production is based on mineral oils as base oil and lithium soap as a thickener. These materials are not only non-biodegradable but also scarce and have health implications. Consequently, biodegradable grease represents an eco-friendly and healthy alternative. Grease made using vegetable oils with the required properties has the potential to bring about revolutionary changes. The present work focuses on the feasibility of using chemically modified blended rice bran oil (RBO) and Calophyllum inophyllum oil (CIO) as a bio-lubricant. The oils undergo a two-step modification process, involving a transesterification reaction followed by epoxidation. Significant improvements have been observed in the chemical properties (acid, peroxide, and iodine values) of transesterified epoxidized rice bran oil Calophyllum inophyllum oil mixture–50:50 (ETRCIO) when compared with Unmodified Rice bran oil Calophyllum inophyllum oil mixture–50:50 (RCIO). The acid value, peroxide value, and iodine value improved by 91.66%, 87.08%, and 15.78% respectively. The rheological, tribological, and chemical properties of the blended samples have been evaluated and compared to pure oils using American Society for Testing and Materials (ASTM) and Indian Standards (IS). Additionally, ETRCIO was used to develop a bio-grease, and its tribological properties were extensively analyzed. The mean coefficient of friction (COF) and wear scar diameter (WSD) of the ETRCIO grease sample improved by 10.20% and 29.32% respectively when compared with that of commercially available grease. These findings indicate that the ETRCIO bio-grease exhibits superior tribological properties in comparison to commercially available grease. Research highlights: • The study explores the potential of vegetable oils as a biodegradable and environmentally friendly alternative for producing lubricants, specifically focusing on rice bran oil and Calophyllum inophyllum oil. • The oils undergo a two-step chemical modification process (transesterification followed by epoxidation) to improve their thermal and oxidative stability, making them suitable for industrial use. • The chemically modified and blended oils showed significantly improved chemical properties. • The rheological, tribological, and chemical properties of the blended samples were evaluated according to ASTM, and IS standards and compared with those of pure oils. • A bio-grease was formulated using these chemically modified oils, exhibiting better tribological properties than commercially available grease, indicating its potential as an eco-friendly and health-conscious alternative to traditional mineral oil-based greases. [ABSTRACT FROM AUTHOR]

The pervasive presence of microplastics within river ecosystems has a profound and often underestimated detrimental impact. These minuscule yet persistent particles have infiltrated diverse biological habitats, making their detrimental effects on aquatic life increasingly concerning worldwide. The ability of microplastics to accumulate within aquatic organisms further exacerbates this concern. Consequently, the monitoring of microplastic pollution in surface water environments has emerged as a crucial endeavour, offering invaluable insights into the extent of this ecological threat. This study delved into the contamination levels of microplastics within two bivalve species, Perna viridis and Villorita cyprinoides, along the Chandragiri River in Kerala and Karnataka, South-West India, spanning eight distinct locations. The investigation yielded a significant discovery, with a total of 667 microplastic particles extracted from 288 individuals. On average, each individual bivalve harboured approximately 2.31 ± 0.93 microplastic items. Notably, these microplastic particles exhibited a wide range of morphological characteristics, underscoring their diverse origins and pathways into the ecosystem. Furthermore, five polymer types of microplastics were unequivocally confirmed through FTIR-ATR analysis, shedding light on the types of plastics that pose a threat to the riverine ecosystem. The findings of this study contribute to a growing body of evidence highlighting the global threat of microplastic pollution, urging international collaboration and innovative solutions to prevent further contamination and remediate existing microplastic burdens in aquatic environments. Highlights: • Microplastic contamination is a major concern in river ecosystems. • Microplastic in two bivalve species were characterized at Chandragiri River India. • The microplastics had diverse shapes and were composed of five different polymers. • This study emphasizes the need to tackle river microplastic pollution. [ABSTRACT FROM AUTHOR]