Search

Recent advancements in the industrial revolution and artificial intelligence have aided in the development of novel approaches that have considerable potential for increasing the efficiency of traffic networks. Emerging concepts of autonomous driving and machine learning can be incorporated intelligently for improving traffic operations and control. In the coming years, traffic composition can vary in terms of autonomous vehicle (AV) penetration rate, which can lead to a heterogeneous traffic environment. Traffic control methods for such complex networks need to be designed effectively for accommodating the positive effects of AV implementation without compromising the safety and level of service in the presence of regular vehicles (RVs). An intelligent-based optimization framework for traffic signal control under heterogeneous AV-based traffic is proposed in this paper. This framework utilizes state-of-the-art machine-learning approaches to represent and design different components of the optimization process of cycle length. Further, SHapley Additive exPlanations (SHAP) is used to enhance model interpretability. The proposed optimization framework improves performance under congested traffic conditions compared with that of the conventional optimization methods. Compared to pure RV-based traffic, the penetration rates of 25%, 50%, and 100% can decrease optimized cycle lengths by 26%, 39%, and 53%, respectively, which can result in delay reductions of approximately 18%, 31%, and 56%, respectively. The proposed framework when applied in an adaptive-based manner can help in the generalization of controlling existing signalized intersections with the gradual penetration of AVs without the extra infrastructure or specific operational and connectivity capabilities of the involved vehicles. [ABSTRACT FROM AUTHOR]

In recent years, the problem of traffic congestion has become increasingly serious, and research on traffic system control has become a new hotspot. Studying the bifurcation characteristics of traffic flow systems and designing control schemes for unstable support points can alleviate traffic congestion from a new perspective. This article improves the full speed differential model considering strong wind models from the perspective of bifurcation control to adjust traffic flow. This article theoretically proves the existence conditions of Hopf bifurcation and saddle node bifurcation in the model and finds the stability mutation point of the transportation system stability. A nonlinear system feedback controller was designed for unstable bifurcation points using Chebyshev polynomial approximation and random feedback control methods. Without changing the system equilibrium point, the advance, delay, and elimination of Hopf bifurcation were achieved, and the abrupt behavior of the transportation system was controlled, thereby alleviating traffic congestion. This article explains the changes in the stability of complex transportation systems from the perspective of bifurcation analysis, which can better capture the characteristics of traffic flow. By adjusting the control parameters in the feedback controller, the influence of boundary conditions on the stability of the transportation system is fully described, and the influence of unstable focal points and saddle points on the system is suppressed, thereby slowing down the traffic flow. In addition, unstable bifurcation points can be eliminated, and the Hopf bifurcation can be controlled to advance, delay, and disappear, thereby achieving control over the stable behavior of the transportation system. This helps alleviate traffic congestion and also helps describe actual traffic phenomena. [ABSTRACT FROM AUTHOR]

Traveling demand increased rapidly on the roads of big cities. Traffic congestion is observed on a regular basis and causes serious problems for citizens. It is a vital need in larger cities to deal with the problem of overcrowded roads because Traffic congestion has negative consequences on daily routines and activities. All of the factors that cause traffic-jam affect our lives physically, mentally, and economically. It has been observed that one of the factors of the traffic jam is traffic diversion. Traffic diversion reroutes all the traffic towards alternative tracks that causes traffic jams to the diverted road. It has been observed in the past that the researchers less considered traffic congestion due to traffic diversion. There is a need for analysis to determine the risk factor related to traffic diversion that impacts the causes of traffic jams. This paper focuses on proposing an architecture based on the Internet Cloud of Vehicles for traffic congestion control through the mobile crowdsensing technique. [ABSTRACT FROM AUTHOR]

In this study, a traffic queue model is employed to simulate traffic parameters for optimization purposes. The primary objective is to enhance the average queue length, cumulative delay, and cumulative reward for varying numbers of vehicles generated using an innovative approach. The proposed methodology integrates deep Reinforcement Q-Learning techniques implemented through a realistic simulator, Simulation of Urban MObility, based on OpenStreetMap. This simulator is used to balance the flow of traffic by monitoring traffic conditions and adjusting signals (Red/Yellow/Green) accordingly. The research extensively evaluates simulation outcomes across different scenarios involving 50, 100, 500, and 1000 vehicles, with episodes 10, 50 and 100. The results provide valuable insights into training times, simulation durations, and total rewards obtained, indicating improvements in mitigating traffic congestion. The introduction of a traffic control strategy enhances model effectiveness through the utilization of four-layer deep neural network architectures with 400 neurons in hidden layers. However, the study also highlights persistent challenges related to real-time implementation and complexities in state-action-agent relationships. The progress highlights improvements in reducing congestion and enhancing efficiency at junctions by dynamically adjusting signal phases while leveraging historical data. The results highlight the potential of dynamic traffic management strategies in effectively addressing urban traffic challenges. [ABSTRACT FROM AUTHOR]

Traffic light optimization is known to be a cost-effective method for reducing congestion and energy consumption in urban areas without changing physical road infrastructure. However, due to the high installation and maintenance costs of vehicle detectors, most intersections are controlled by fixed-time traffic signals that are not regularly optimized. To alleviate traffic congestion at intersections, we present a large-scale traffic signal re-timing system that uses a small percentage of vehicle trajectories as the only input without reliance on any detectors. We develop the probabilistic time-space diagram, which establishes the connection between a stochastic point-queue model and vehicle trajectories under the proposed Newellian coordinates. This model enables us to reconstruct the recurrent spatial-temporal traffic state by aggregating sufficient historical data. Optimization algorithms are then developed to update traffic signal parameters for intersections with optimality gaps. A real-world citywide test of the system was conducted in Birmingham, Michigan, and demonstrated that it decreased the delay and number of stops at signalized intersections by up to 20% and 30%, respectively. This system provides a scalable, sustainable, and efficient solution to traffic light optimization and can potentially be applied to every fixed-time signalized intersection in the world. Without relying on any infrastructure-based vehicle detectors, the authors present a scalable traffic signal re-timing system that uses a small percentage of connected vehicle trajectories as the only input. Real-world tests demonstrate that the system decreases both delays and number of stops. [ABSTRACT FROM AUTHOR]

The alleviation of traffic congestion relies on efficient traffic control and traffic guidance, which are based on real-time short-term traffic flow prediction. In this paper, the stacked autoencoder (SAE) deep learning model with powerful feature learning capability is selected to predict the traffic flow on road sections. The process of training SAE includes the pre-training phase and the fine-tuning phase, which mainly apply the BP algorithm. However, the process of training SAE is time-consuming and cannot meet the real-time performance of modern application systems. This paper proposes a parallel training strategy for the SAE prediction model based on data parallel mode. The gradient solution process in our algorithm satisfies the conditions of parallel computing, so the training process can be designed in a parallel manner. The original dataset is distributed to some computing nodes, which are work nodes. The work node is responsible for gradient calculation using the local data. The task of the sole master node is to synthesize the gradient calculation results and then broadcast the updated gradient to each work node. The simulation results show that the SAE-based prediction model achieves better results than the traditional model, and the parallel algorithm reduces the running time of training processes. [ABSTRACT FROM AUTHOR]

The research of traffic congestion control has been developed rapidly in recent years. Researching the bifurcation characteristics of traffic flow and designing control schemes for unstable bifurcation points can provide some new methods for relieving the traffic congestion. In this paper, we study the bifurcation characteristics and nonlinear control of traffic flow based on the continuum model considering the new energy vehicles effect. First, a macroscopic traffic flow model considering the number of new energy vehicles and their range is proposed. Then, we transform it into a traffic flow stability model suitable for branching analysis using the traveling wave transformation. Therefore, we can transform the traffic flow problem into the stability analysis problem of systems and reflect unstable traffic characteristics such as congestion. Based on the stability model, the existence conditions of the Hopf bifurcation are proved and some bifurcation points of the traffic system are found. Second, we study the congestion and stability abrupt change behaviors near the equilibrium point and branching point to seek for the formation mechanism of traffic congestion. Finally, for the unstable bifurcation point, the control scheme is designed by Chebyshev polynomial approximation, stochastic feedback control, and other methods to delay or disappear the unstable bifurcation point and alleviate traffic congestion. It has important theoretical significance and application value. [ABSTRACT FROM AUTHOR]