Search

Photoelectrochemical (PEC) technology in marine engineering holds significant importance due to its potential to address various challenges in the marine environment. Currently, PEC-type applications in marine engineering offer numerous benefits, including sustainable energy generation, water desalination and treatment, photodetection, and communication. Finding novel efficient photoresponse semiconductors is of great significance for the development of PEC-type techniques in the marine space. Bismuth-based semiconductor materials possess suitable and tunable bandgap structures, high carrier mobility, low toxicity, and strong oxidation capacity, which gives them great potential for PEC-type applications in marine engineering. In this paper, the structure and properties of bismuth binary and mixed-anion semiconductors have been reviewed. Meanwhile, the recent progress and synthetic approaches were discussed from the point of view of the application prospects. Finally, the issues and challenges of bismuth binary and mixed-anion semiconductors in PEC-type photodetection and hydrogen generation are analyzed. Thus, this perspective will not only stimulate the further investigation and application of bismuth binary and mixed-anion semiconductors in marine engineering but also help related practitioners understand the recent progress and potential applications of bismuth binary and mixed-anion compounds. [ABSTRACT FROM AUTHOR]

Element doping and construction of heterojunction composites are the most common ways to enhance g-C3N4, which are very attractive in achieving high photocatalytic activity. In this study, 2D nanosheet structured BCN was obtained by doping B atoms with graphite carbon nitride. Subsequently, Ti MOFs were loaded on BCN to obtain a Z-scheme heterojunction composite TBCN through calcination. Under simulated sunlight, the photocatalytic hydrogen production rate of the TBCN heterostructure was 1242 μmol h−1 g−1, which was 2.2 times higher than that of BCN and 9.34 times higher than that of bulk graphite carbon nitride (GCN). Experimental results showed that the construction of a Z-scheme heterojunction composite (TBCN) could effectively adjust the material band gap position, expand the light absorption range, enhance electron transfer and inhibit electron–hole recombination, which are crucial for efficient photocatalysis. This study not only provides a strategy for constructing heterojunction composites in the field of g-C3N4 photocatalytic hydrogen evolution, but also deeply analyzes the electron migration direction and the reasons for enhancing carrier separation in the Z-type heterojunction scheme, thus providing potential guidance for future research. [ABSTRACT FROM AUTHOR]

Exploring efficient non-noble metal catalysts for the hydrogen evolution reaction (HER) will contribute to the development of clean and green energy technologies. Herein, we adopted a "waste utilization" strategy by using readily available and inexpensive coconut shell waste as a carbon source to synthesize carbon materials anchored with a Cu7Co alloy (Cu7Co/C) as a potential electrocatalyst for the hydrogen evolution reaction (HER). Utilizing a combination of hydrothermal and pyrolysis methods, the synthesized Cu7Co/C catalyst showcases superior HER electrocatalytic performance in alkaline solutions, with an overpotential of 134 mV at 10 mA cm−2 and a Tafel slope of 94 mV dec−1. The alloying of Cu and Co within Cu7Co/C markedly improves charge transfer capabilities, enhancing HER electrocatalysis. This research underscores the exceptional catalytic performance and stability of Cu7Co/C nanocomposites in alkaline media for the HER, attributed to a synergistic effect between the carbon derived from coconut shells and the bimetallic Cu7Co alloy. [ABSTRACT FROM AUTHOR]

NaBH4 is an attractive candidate for closed-loop hydrogen generation in small practical applications owing to its ambient condition hydrogen release mechanism, non-toxic byproduct, ability to regenerate, and stability at ambient conditions. The hydrolysis of NaBH4 requires a catalyst to accelerate the hydrogen generation process and cobalt oxide is one such promising catalyst in this reaction. The surface species and crystalline phases of cobalt oxide catalysts play an important role in determining the hydrogen generation rate and overall hydrolysis process. In this study, cobalt oxide nanoparticles are synthesized by a thermal plasma route. The two crystalline phases, namely c-CoO and Co3O4, are tuned using thermal plasma operating conditions. The catalysts so obtained have been thoroughly characterized using analytical techniques like XRD, XPS, HR-TEM, etc. Furthermore, the catalyst was used for hydrogen production in the hydrolysis process of NaBH4. The ex situ X-ray photoelectron spectra recorded at different stages of the hydrolysis process have been extensively used to understand surface modifications occurring at the surface of the catalyst. The Co+3/Co+2 ratio and attachment of other species during hydrolysis analyzed using XPS are correlated with the overall hydrolysis reaction before and after catalysis. It was concluded that the presence of the c-CoO (i.e. initial Co+2 species presence) phase brings stability to hydrogen production in that cycle. [ABSTRACT FROM AUTHOR]

Electrocatalytic hydrogen generation in alkaline medium has become widely used in a variety of sectors. However, the possibility for additional performance improvement is hampered by slow kinetics. Because of this restriction, careful control over processes such as water dissociation, hydroxyl desorption and hydrogen recombination is required. Covalent organic frameworks (COFs) based on porphyrin and polyoxometalates (POMs) show encouraging electrocatalytic performance, offering a viable route for effective and sustainable hydrogen generation. Their specific architectures lead to increased electrocatalytic activity, which makes them excellent choices for developing water electrolysis as a clean energy conversion method in the alkaline medium. In this regard, TTris@ZnPor and Lindqvist POM were coordinated to create a new eco-friendly and highly active covalent organic framework (TP@VL-COF). In order to describe TP@VL-COF, extensive structural and morphological investigations were carried out through FTIR, 1H NMR, elemental analysis, SEM, fluorescence, UV-visible, PXRD, CV, N2-adsorption isotherm, TGA and DSC analyses. In an alkaline medium, the electrocatalytic capability of 20%C/Pt, TTris@ZnPor, Lindqvist POM and TP@VL-COF was explored and compared for the hydrogen evolution reaction (HER). The TP@VL-COF showed the best catalytic efficiency for HER in an alkaline electrolyte, requiring just a 75 mV overpotential to drive 10 mA cm−2 and outperforming 20%C/Pt, TTris@ZnPor, Lindqvist POM and other reported catalysts. The Tafel slope value also indicates faster kinetics for TP@VL-COF (114 mV dec−1) than for 20%C/Pt (182 mV dec−1) TTris@ZnPor (116 mV dec−1) and Lindqvist POM (125 mV dec−1). [ABSTRACT FROM AUTHOR]

In this work, CoV-LDH/ZnIn2S4 (CoV-LDH/ZIS) nanocomposites were synthesized through a self-assembly process in order to investigate the influence of CoV-LDH addition on the rate of hydrogen production. XRD and TEM measurements confirmed the effective preparation of CoV-LDH/ZIS nanocomposites. Among all the nanocomposite photocatalysts, 2.0%-CoV-LDH/ZIS showed the best photocatalytic performance with a hydrogen production rate of 1397.3 μmol g−1 h−1, approximately 2.2 times that of pure ZnIn2S4 (ZIS). The X-ray photoelectron spectroscopy (XPS) measurement indicated that there is a strong interfacial interaction between ZIS and CoV-LDH, indicating that more than simple mechanical mixing had occurred. The steady-state fluorescence spectroscopy (PL) and time-resolved photoluminescence (TRPL) spectroscopy results showed that the electron and hole recombination in CoV-LDH/ZIS is significantly reduced and that efficient interface charge transfer and separation are achieved. This work sheds light on the interfacial electron transfer between two semiconductor materials, which promotes the separation of photogenerated carriers and thus enhances photocatalytic hydrogen production activity. [ABSTRACT FROM AUTHOR]

Finding efficient photocatalysts is the key to achieving sustainable hydrogen production. In this work, a rational design of Cd2+-doped Zn3In2S6 (ZIS) and a heterojunction structure with g-C3N4 (GCN) was carried out to form a GCN/Cd/ZIS composite. The synergistic effect of Cd2+ doping and heterojunction construction in the photocatalytic hydrogen production process was probed. The results showed that doping Cd2+ modified the bandgap structure of ZIS and improved the photocatalytic activity. The heterojunction construction between Cd/ZIS and GCN also effectively promoted the separation and migration of photogenerated carriers, which significantly improved the hydrogen production performance of the GCN/Cd/ZIS composite. The hydrogen production rate of 15% Cd/ZIS and 5% GCN/Cd/ZIS was 2.45 mmol g−1 h−1, 3.34 mmol g−1 h−1, which was 4.3 and 5.9 times higher than that of ZIS (0.57 mmol g−1 h−1), respectively. This study provides strong evidence that doping and heterojunction construction can synergistically improve photocatalytic activity. [ABSTRACT FROM AUTHOR]

Hydrazine borane (HB) has been considered to be an excellent medium for hydrogen storage, but the development of efficient catalysts for controllable and complete hydrolytic dehydrogenation of HB remains a severe challenge. In this study, a novel catalyst consisting of Ni0.6Pt0.4 nanoparticles supported on phosphorus-doped reduced graphene oxide (P-rGO) is readily obtained via a simple co-reduction method and serves as a highly efficient and stable catalyst toward the complete hydrolytic dehydrogenation of HB. Compared with Ni0.6Pt0.4/rGO, the as-prepared Ni0.6Pt0.4/P-rGO catalyst exhibits much higher catalytic activity for HB dehydrogenation, providing a total turnover frequency (TOF) value of 2419.4 h−1 at 323 K, which surpasses that of the majority of reported catalysts. Meanwhile, it also exhibits lower activation energy (Ea) and better recycle stability. The reason for the outstanding catalytic performance of Ni0.6Pt0.4/P-rGO could be attributed to the combined influence of small particle sizes, the enhanced synergistic effects of NiPt nanoparticles and the P-rGO substrate, the electronic interaction between Ni and Pt, and the NaOH promotion effect. This work provides an innovative approach to construct highly efficient and robust catalyst systems using simple and controllable methods. [ABSTRACT FROM AUTHOR]

Developing highly active and stable non-noble-metal cocatalyst-decorated semiconductors is desirable for the practical application of photocatalysis, which remains an open question. Herein, we report transition-metal nitride (Ni3FeN) loaded cadmium sulfide (CdS) nanorods prepared through a simple hydrothermal method and surface treatment with NH3. The as-prepared photocatalyst Ni3FeN (3 wt%)/CdS showed a hydrogen evolution rate of 4.6 mmol g−1 h−1, which was 23.8 and 6.8 fold higher than those of CdS and Pt (1 wt%)/CdS, respectively. The Ni3FeN/CdS sample exhibited remarkable stability for seven consecutive cycles of photocatalytic tests lasting 21 hours. It was confirmed through Kelvin probe measurements that a Schottky junction between Ni3FeN and CdS gave rise to the inhibited recombination of photogenerated carriers, which benefited the photocatalytic HER performance. [ABSTRACT FROM AUTHOR]

This study developed an efficient photocatalyst for hydrogen production, consisting of CdS nanorods and the CoTPPBr4 co-catalyst. The synthesized photocatalyst was characterized using a suite of techniques including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), photoluminescence (PL) spectroscopy, and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS). Additionally, transient photocurrent response and electrochemical impedance spectroscopy (EIS) were carried out to further probe the material's properties. Our findings demonstrate that the CoTPPBr4 co-catalyst significantly enhances the photocatalytic H2 evolution efficiency under visible light irradiation. Notably, among the tested photocatalysts, a 12.5% CoTPPBr4/CdS composite exhibited the most superior photocatalytic performance, achieving a hydrogen production rate of 41.3 mmol g−1 h−1, which is 4.1 times higher than that of pristine CdS. The introduction of CoTPPBr4 effectively facilitates charge transfer within CdS, enhances the separation efficiency of light-induced electron–hole pairs, and boosts the surface H2-evolution kinetics. This research not only introduces a promising photocatalyst for visible light-driven hydrogen production but also provides a way for the development of highly efficient and stable CdS-based hybrid semiconductor nanocomposites suitable for diverse photocatalytic applications. [ABSTRACT FROM AUTHOR]

The development of high-performance and highly stable electrocatalysts is crucial and challenging for the hydrogen evolution reaction (HER). MOFs complexed with SnS2 can form complexes with inserted structures, and their large specific surface area and numerous pores favor mass transfer, exposing the S active sites to more SnS2, improving the utilisation of the active sites and enhancing the catalytic activity for the HER. Structural collapse can be hindered to improve the stability of the HER composites. Herein, six different kinds of SnS2 were synthesized by a hydrothermal method under discrete conditions, and SI8-SnS2 was screened out to have optimal morphology and electrocatalytic performance. Two innovative SnS2@Ni-MOF and SnS2@HKUST-1 as efficient electrocatalysts were synthesized by a facile grinding method for hydrogen generation. SnS2@Ni-MOF and SnS2@HKUST-1 catalysts showed lower overpotentials of 117 mV and 142 mV at 10 mA cm−2 (η10) and smaller Tafel slopes (58 mV dec−1 and 93 mV dec−1) than six different kinds of SnS2, Ni-MOF and HKUST-1 in 0.5 M H2SO4. Meanwhile, the Cdl values for SnS2@Ni-MOF and SnS2@HKUST-1 were estimated to be 11.5 mF cm−2 and 8.0 mF cm−2, and the stabilities of SnS2, Ni-MOF, HKUST-1, SnS2@Ni-MOF, and SnS2@HKUST-1 were tested at a current density of 10 mA cm−2. The current densities of SnS2@Ni-MOF and SnS2@HKUST-1 were stable over 8 h compared to the pure samples, and SEM, XPS tests were run after the HER test, indicating that the materials have excellent electrocatalytic stability. The syntheses of SnS2@Ni-MOF and SnS2@HKUST-1 enhance their intrinsic catalytic activity, and the porous structure promotes mass transfer efficiency, thereby improving the HER performance, which will guide the development of new and promising electrocatalysts for HER. [ABSTRACT FROM AUTHOR]

Designing cost-effective catalysts with the structural features and necessary functionality to drive ammonia borane hydrolysis for hydrogen generation remains a challenge. In this work, a close heterojunction of Fe3O4--Ni2P uniformly embedded in amorphous carbon material (Fe3O4--Ni2P@C) has been prepared via surface phosphorization. The catalyst displays superior activity with a turnover frequency (TOF) of 92.8 min-1 and favorable durability for ammonia borane hydrolysis, making it superior to most reported nickel-based catalysts. The theoretical studies show a high electron density on the Fe3O4--Ni2P heterojunction. Combining the theoretical and experimental results, the dual active sites at the heterojunction are beneficial to the adsorption of reactant molecules and the reduction of the reaction barrier. This strategy of constructing an appropriate heterojunction to maximize synergistic effects may open a new avenue for non-precious metal catalysis. [ABSTRACT FROM AUTHOR]

The designing of efficient electrocatalysts for hydrogen generation is essential for the practical application of water-splitting devices. With numerous electrochemical advantages, transition metal sulphides are regarded as the most promising candidates for catalysing the hydrogen evolution reaction (HER) in acidic media. In the present study, Ru-doped cobalt sulphide nanosheets, termed Co9S8/Ru@t (t = 24 h, 48 h, and 72 h), were obtained by varying the reaction time from 24 h to 72 h from a RuCo-PBA precursor. The role of the time period for the synthesis of Co9S8/Ru@48h is vital in increasing the number of electroactive sites and optimising the hydrogen adsorption–desorption phenomena leading to an increment in the HER activity. The electrochemical outcomes demonstrate that the optimized Co9S8/Ru@48h requires a low overpotential of just 94 mV to produce 10 mA cm−2 current density, and also exhibits a lower Tafel slope value of 84 mV dec−1 defining its faster reaction kinetics. The as-synthesized Co9S8/Ru@48h was stable for up to 20 h of constant electrolysis signifying its outstanding durability. The optimized synthetic approach and impressive electrochemical results make Co9S8/Ru@48h a suitable alternative to noble-metal-based electrocatalysts for the HER. [ABSTRACT FROM AUTHOR]

Water-splitting coupled with the hydrazine oxidation reaction (HzOR) is a remarkably important strategy for H2 production, but remains a challenge. Herein, a Fe-doped Ni2P-Co2P-Zn3P2 heterogeneous electrocatalyst with a nanoneedle-assembled nanosphere structure and abundant defects was fabricated on Ni foam (Fe-NiCoZnP/NF). The introduction of Fe can tune the electron structure of NiCoZnP/NF, leading to a modulation of the d-band center towards the Fermi level, hence optimizing the free energy of hydrogen (ΔGH*) and dehydrogenation behavior of hydrazine, and thereby realizing splendid HER and HzOR activities. The fabricated Fe-NiCoZnP/NF catalyst displays outstanding HER and HzOR activity and durability, with potentials of 121 and 13 mV vs. RHE to drive 1000 mA cm-2 and Tafel slopes of 31.2 and 11.9 mV dec-1, respectively, and a long durability of 120 h to achieve 100 mA cm-2. Impressively, overall water-hydrazine electrolysis employing Fe-NiCoZnP/NF as the anodic and cathodic electrodes only requires low voltages of 1.92 and 2.67 V to achieve 100 and 1000 mA cm-2, respectively, with a high stability for 120 h operation time during overall hydrazine splitting (OHzS). This work offers a justification for the design of high-efficiency bifunctional catalysts, and promotes energy-saving industry-level hydrogen generation. [ABSTRACT FROM AUTHOR]

In the photocatalytic processes of ferroelectric semiconductor materials, how to induce a depolarized electric field (Edp) by polarization to reduce the electron–hole recombination rate is still a big problem. Here, the ABO3-type K0.5Na0.5NbO3 (KNN) material is modified by Nd and Ni elements at A/B sites to narrow the band gap and maintain the room-temperature ferroelectric behavior. The 0.96KNN–0.04NdNiO3 sample shows the narrowed band gap (∼2.75 eV) and high residual polarization value (∼11.56 μC cm−2). After high-field poling, the hydrogen production rate of the sample in the full spectrum reaches 926.28 μmol g−1 h−1, indicating an increase of approximately 5 times compared to the 170.45 μmol g−1 h−1 of the unpoled sample. The improved performance of photocatalytic hydrogen production mainly results from the reduction of band gap and the formation of Edp after polarization. The change in the position of the top of the valence band after sample polarization reveals that high-field poling can improve charge transport efficiency by energy band bending. [ABSTRACT FROM AUTHOR]

Visible-light-driven hydrogen evolution from water represents a green and sustainable technology to convert solar energy into chemical energy. Covalent organic frameworks (COFs) are the most competitive platforms among the variety of photocatalysts. Herein, a novel benzotrifuran-based donor–acceptor material (COF-JLU42) was constructed using a Schiff base polycondensation reaction by introducing electron-rich benzotrifuran and deficient triazine moieties into the framework. The new COF features high crystallinity and permanent porosity with a large surface area and proves to be a photoactive semiconductor with efficient visible-light harvesting capacity. Importantly, COF-JLU42 exhibits a superior photocatalytic activity with a hydrogen evolution rate of over 40 000 μmol g−1 h−1 under visible-light illumination, which is 2.5 times higher than that of the isomorphic benzotrithiophene-based COFs under the same conditions. These findings suggest the huge application prospect of benzotrifuran-based framework materials as metal-free and solid photocatalysts in solar-energy conversion and storage. [ABSTRACT FROM AUTHOR]

Improving the separation efficiency of photo-generated electron–hole pair is a key issue in the field of photocatalytic hydrogen production. In this work, we successfully improved the efficiency of photo-generated carrier separation using the synergistic action of sulfur (S) vacancies and a Ni2P co-catalyst. Vs-Zn0.5Cd0.5S (Vs-ZCS) with S vacancies was designed and constructed, and Vs-ZCS/Ni2P photocatalysts were prepared with non-precious metal Ni2P as a co-catalyst. Among all the produced materials, Vs-ZCS/Ni2P-5% has a photocatalytic characteristic of 40.81 mmol g−1 h−1, which is 7.88, 3.08 and 3.75 times greater than those of ZCS (5.18 mmol g−1 h−1), Vs-ZCS (13.25 mmol g−1 h−1) and ZCS/Ni2P-5% (10.88 mmol g−1 h−1), respectively. The results of transient photo-current, electrochemical impedance spectroscopy, photoluminescence and time-resolved fluorescence show that the synergistic effect of S vacancies and Ni2P significantly promotes the separation and transfer efficiency of photo-generated carriers, as well as the photocatalytic hydrogen production reaction. Superoxide radicals and electrons are the active species for photocatalytic hydrogen generation, which is confirmed by active species capture tests and EPR. This study presents an innovative approach for developing photocatalysts with low cost and good catalytic performance. [ABSTRACT FROM AUTHOR]

At present, the rational design and facile synthesis of highly active and low-cost photocatalysts are still facing great challenges. Herein, a series of Zn0.5Cd0.5S/NiS (x mol%) composite photocatalysts have been synthesized via a simple and mild one-pot hydrothermal method. Compared with pure Zn0.5Cd0.5S, the NiS-loaded samples exhibit enhanced photocatalytic hydrogen generation performance, in which the Zn0.5Cd0.5S/NiS-5% sample has the highest H2 production rate of 10 855 ± 461 μmol h−1 g−1 with a quantum yield of 11.82% at 365 nm, which is almost 6.3 times higher than that of pristine Zn0.5Cd0.5S. The high activity of the Zn0.5Cd0.5S/NiS nanosheets may be attributed to their distinct nanostructure, including a short transfer distance of photoinduced charge carriers, a large number of unsaturated surface atoms, and a large surface area. Moreover, the added NiS nanoparticles served as an effective cocatalyst to promote photoinduced electron transfer and enhance the surface kinetics of H2 evolution. Our work provides a simple and effective route for the preparation of sulphur-based photocatalysts, which can significantly improve the efficiency of hydrogen production from water. [ABSTRACT FROM AUTHOR]

NiFe-LDH/g-C3N4 (LDH/CN) heterostructures with different amounts of NiFe-LDH (LDH) were prepared by a hydrothermal method and characterized using different experimental techniques. Their photocatalytic properties were investigated using the degradation of tetracycline hydrochloride (TC) and the production of hydrogen from water splitting. Experimental results showed that the hydrogen production rate (780.5 μmol g−1 h−1) was 2.29 times that of pristine CN, and the TC removal rate (76.3%) of 1.8LDH/CN was 3.71 times that of CN. According to the detailed study of the structural, optical, and photoelectrochemical properties, a type II charge transfer mechanism was proposed to explain the improved photocatalytic performance of LDH/CN. [ABSTRACT FROM AUTHOR]

Natural photosynthetic biosystems, with elaborate spatial structures, possess substantial specific surface areas and strong light-scattering abilities and provide a blueprint for the fabrication of photocatalysts for efficiently capturing and utilizing solar energy. However, mimicking sophisticated natural structures by a rational design is a great challenge. Herein, we report a facile and universal symbiosis hydrothermal synthesis strategy for obtaining biomimetic volvox-like double-core nested hollow materials. The nested hollow materials possessed the special notched "mother–twin" core–shell structure and the core numbers could be well controlled by adjusting the amount of precursor. The notched double-core hollow ZnO/CdS (mother–twin HZC) was facilely constructed by the direct chemical deposition of CdS nanosheets on the double-core hollow ZnO (mother–twin HZ). The notched complex spatial heterostructure possessed a multiple light-reflection capability (improving the utilization of solar energy), tight interfacial contact (favoring charge migration), and a high surface-to-volume ratio (providing sufficient active sites for H2 production). Both the Z-scheme ZnO/CdS heterostructures and the special nested hollow structure could synergistically enable achieving a remarkable hydrogen generation rate (up to 18.70 mmol g−1 h−1) under visible-light irradiation, exceeding that of the reported similar ZnO/CdS heterostructure without co-catalysts. [ABSTRACT FROM AUTHOR]

Developing novel catalysts with excellent photocatalytic hydrogen evolution activity is crucial for expediting current research on solar-chemical energy conversion. In the present study, unique Sn3O4/CdS composites were carefully designed and prepared using a facile hydrothermal method to achieve outstanding photocatalytic H2 production activity. Various techniques were employed to determine the crystalline structure, chemical composition, microstructure, and optical and electrochemical characteristics of the prepared samples. The experimental results indicate that zero-dimensional (0D) CdS quantum dots were tightly attached to the surface of three-dimensional (3D) Sn3O4 nanoflowers. Furthermore, enhanced light-absorbing capacity and accelerated electron–hole separation and transfer were achieved after incorporating CdS quantum dots into Sn3O4 nanoflowers. The generation rate of hydrogen using the optimal sample (Sn3O4/CdS QDs-2) was about 20.74 μmol g−1 h−1, which was 2.86 and 3.16 times those of pure Sn3O4 and CdS, respectively. In addition, the possible photocatalytic H2 production mechanism of Sn3O4/CdS nanocomposites was also revealed. This work is highly desirable to provide valuable inspiration for rational design and preparation of efficient photocatalysts for H2 evolution. [ABSTRACT FROM AUTHOR]

Hydrogen production with higher efficiency and lower cost is of great significance for the sustainable development of energy. Zinc cadmium sulfide (CZS) is gaining more attention owing to its excellent photocatalytic properties. However, its development is greatly limited due to photogenerated charge recombination. In this work, an innovative design with a unique 3D morphology was introduced by integrating 3DTiO2 into CZS to form a novel 3DTiO2/CZS heterojunction photocatalyst. As a result, the optimized composite achieved a very high hydrogen production rate of 75.38 mmol h−1 g−1 under visible light, which is 2.4 times higher than that of the original CZS. It can also be greatly demonstrated through photoelectrochemical tests that this unique 3D morphology contributes to the effective separation of electrons and holes, thus dramatically improving the photocatalytic activity of 3DTiO2/CZS composites. The 3DTiO2/CZS composite has a rational energy band structure, which makes it more favorable for the hydrogen precipitation reaction. It is believed that such a modification strategy based on 3DTiO2 can be applied to other similar photocatalysts as well for boosting hydrogen evolution. [ABSTRACT FROM AUTHOR]

Efficient and cost-effective photocatalysts are pivotal for advancing large-scale solar hydrogen generation. Herein, we report a composite photocatalyst by incorporating MoS2 quantum dots (MoS2 QDs) as a cocatalyst into Cs3Bi2I9, resulting in a high enhancement in photocatalytic performance. Remarkably, the optimum MoS2 QDs/Cs3Bi2I9 composite achieves an impressive hydrogen evolution rate (6.09 mmol h−1 g−1) in an ethanol and HI/H3PO2 mixed solution. This rate is 8.8 times higher than pristine Cs3Bi2I9 (0.69 mmol h−1 g−1) and notably surpasses Pt/Cs3Bi2I9 (2.47 mmol h−1 g−1). Moreover, the composite displays exceptional stability during an 18-hour reaction, showcasing its potential for sustainable photocatalytic hydrogen evolution. [ABSTRACT FROM AUTHOR]