Search

The marine carbonates in the Ordovician Majiagou Formation in the Ordos Basin have significant exploration potential. Research has focused on their thermal history and hydrocarbon accumulation stages, as these are essential for guiding the exploration and development of hydrocarbons. In this paper, we study the thermal evolution history of the carbonate reservoirs of the Ordovician Majiagou Formation in the east-central Ordos Basin. Furthermore, petrographic and homogenization temperature studies of fluid inclusions were carried out to further reveal the hydrocarbon accumulation stages. The results demonstrate that the degree of thermal evolution of the Ordovician carbonate reservoirs is predominantly influenced by the deep thermal structure, exhibiting a trend of high to low values from south to north in the central region of the basin. The Fuxian area is located in the center of the Early Cretaceous thermal anomalies, with the maturity degree of the organic matter ranging from 1 to 3.2%, with a maximum value of 3.2%. The present geothermal gradient of the Ordovician Formation exhibits the characteristics of east–high and west–low, with an average of 28.6 °C/km. The average paleo-geotemperature gradient is 54.2 °C/km, the paleoheat flux is 55 mW/m2, and the maximum paleo-geotemperature reaches up to 270 °C. The thermal history recovery indicates that the Ordovician in the central part of the basin underwent three thermal evolution stages: (i) a slow warming stage before the Late Permian; (ii) a rapid warming stage from the end of the Late Permian to the end of the Early Cretaceous; (iii) a cooling stage after the Early Cretaceous, with the hydrocarbon production of hydrocarbon source rocks weakening. In the central part of the basin, the carbonate rock strata of the Majiagou Formation mainly developed asphalt inclusions, natural gas inclusions, and aqueous inclusions. The fluid inclusions can be classified into two stages. The early-stage fluid inclusions are mainly present in dissolution holes. The homogenization temperature is 110–130 °C; this coincides with the hydrocarbon charging period of 210–165 Ma, which corresponds to the end of the Triassic to the end of the Middle Jurassic. The late-stage fluid inclusions are in the dolomite vein or late calcite that filled the gypsum-model pores. The homogenization temperature is 160–170 °C; this coincides with the hydrocarbon charging period of 123–97 Ma, which corresponds to the late Early Cretaceous. Both hydrocarbon charging periods are in the rapid stratigraphic warming stage. [ABSTRACT FROM AUTHOR]

The ash generated by Circulating Fluidized Bed (CFB) boilers is featured by its looseness and porosity, low content of glassy substances, and high contents of calcium (Ca) and sulfur (S), thus resulting in a low comprehensive utilization rate. Currently, the predominant treatment approach for CFB ash and slag is stacking, which may give rise to issues like environmental pollution. In this paper, CFB ash (with a CaO content of 7.64% and an SO3 content of 1.77%) was used as the main raw material. The high-temperature melting characteristics, viscosity–temperature characteristics, and initial crystallization temperature of samples with different acidity coefficients were investigated. The final drawing temperature range of the samples was determined, and mechanical property tests were conducted on the prepared inorganic fibers. The results show that the addition of dolomite powder has a significant reducing effect on the complete liquid phase temperature. The final drawing temperatures of the samples with different acidity coefficients range as follows: 1270–1318 °C; 1272–1351 °C; 1250–1372 °C; 1280–1380 °C; 1300–1382 °C; and 1310–1384 °C. The drawing temperature of this system is slightly lower than that of basalt fibers. Based on the test results of the mechanical properties of inorganic fibers, the Young's modulus of the inorganic fibers prepared through the experiment lies between 55 GPa and 74 GPa, which basically meets the performance requirements of inorganic fibers. Consequently, the method of preparing inorganic fibers by using CFB ash and dolomite powder is entirely feasible. [ABSTRACT FROM AUTHOR]

Hydraulic fracturing (HF) is the primary choice for stimulating petroleum reservoirs. Rock tensile strength and brittleness are crucial parameters required for screening candidate reservoirs and in designing successful HF operations. However, in situ and laboratory determinations of the hydraulic tensile strength (HTS) of rock can prove problematic. Alternatively, the HTS could be estimated from the rock brittleness once a reliable relationship has been established between them. Accordingly, this paper investigates the correlations between the HTS, as measured using laboratory hydraulic fracture tests, and ten strength-based brittleness indices (BIs) selected from the research literature. The primary inputs for computing these BIs are uniaxial compressive strength (UCS) and the Brazilian tensile strength (BTS), which are typically measured for most projects using standard laboratory rock mechanics tests or obtained from log data. For the purposes of this experimental investigation, intact rock core samples were obtained from a carbonate–dolomite formation in Iran, comprising eight distinct geomechanical units, with measured values of UCS, BTS, and HTS ranging 29.7–162.2, 1.93–12.23, and 7.20–20.63 MPa, respectively. The measured HTS was found to directly correlate with the UCS, BTS, and Young's modulus, and inversely correlated with the rock porosity. Seven of the ten investigated BIs correlated with the measured HTS over 69% (R2 ≥ 0.69). In particular, the BI expressions developed by Yagiz and Gokceoglu, Ghadernejad et al., and Khandelwal et al. exhibited relatively strong correlations with the measured HTS (producing R2 values of 0.94, 0.87, and 0.86, respectively), suggesting that these three HTS–BI correlations could be used to provide preliminary HTS estimates for the investigated carbonate–dolomite formation in Iran. This work adds to a database that can be expanded to include other geographical regions for providing useful information about the selection of a suitable site or reserve for conducting HF operations. [ABSTRACT FROM AUTHOR]

Siliceous minerals of the Dengying Formation in the Gaoshiti–Moxi area in the central Sichuan Basin exhibit four types of quartz crystals (cryptocrystalline quartz, chalcedony, microcrystalline quartz, and megacrystalline quartz) and three structural types: cryptocrystalline, microcrystalline, and mosaic (laminated mosaic, window-hole interrupted mosaic, and arc-laminated mosaic). Siliceous minerals have a great influence on the storage performance of the reservoirs in the Dengying Formation. According to the petrophysical parameters of the Dengying Formation and porosity intersection diagrams, the siliceous dolomite and the reservoirs have low impedance characteristics, which makes it difficult to distinguish between them and leads to difficulties in the characterization and prediction of the reservoirs. The transverse wave velocity is favorable for reservoir characterization. Currently, the main method used to estimate the transverse wave velocity is petrophysical modeling, which establishes a relationship between the elastic and physical parameters of the reservoir. In this paper, the siliceous minerals in the dolomite in the study area are regarded as solid inclusions, and the calculation method of the rock matrix modulus is improved by using solid replacement. Then, an improved petrophysical model is constructed by combining the KT (Kuster–Toksöz) model, the DEM (Discrete Element Method) model, the Gassmann equation, and the Wood equation. The transverse wave velocity is estimated using the improved model under the constraint of the longitudinal wave velocity. The shapes of the transverse wave velocity curves obtained by the improved model and the deviations from the measured velocities are significantly better than those of the Xu–Payne model and other models. The results show that the improved model can effectively estimate the transverse wave velocity of the reservoir in this area, which provides a basis for future reservoir predictions in this area. [ABSTRACT FROM AUTHOR]

In order to enhance the development efficiency of thick and complex carbonate reservoirs in the Middle East, a case study was conducted on M oilfield in Iraq. This study focused on reservoir characterization, injection-production modes, well pattern optimization, and other related topics. As a result, key techniques for the high-efficiency development of thick carbonate reservoirs were established. The research findings include the following: (1) the discovery of hidden "low-velocity" features within the thick gypsum-salt layer, which led to the development of a new seismic velocity model; (2) the differential dissolution of grain-supported limestones is controlled by lithofacies and petrophysical properties, resulting in the occurrence of "porphyritic" phenomena in core sections. The genetic mechanism responsible for reversing petrophysical properties in dolostones is attributed to "big hole filling and small hole preservation" caused by dense brine refluxing; (3) fracture evaluation technology based on anisotropy and dipole shear wave long-distance imaging was developed to address challenges associated with quantitatively assessing micro-fractures; (4) through large-scale three-dimensional physical models and numerical simulations, it was revealed that water–oil displacement mechanisms involving "horizontal breakthrough via hyper-permeability" combined with vertical differentiation due to gravity occur in thick and heterogeneous reservoirs under spatial injection-production modes; (5) a relationship model linking economic profit with well pattern density was established for technical service contracts in the Middle East. Additionally, an innovative stepwise conversion composite well patterns approach was introduced for thick reservoirs to meet production ramp-up requirements while delaying water cut rise; (6) a prediction technology for the oilfield development index, considering asphaltene precipitation, has been successfully developed. These research findings provide robust support for the efficient development of the M oilfield in Iraq, while also serving as a valuable reference for similar reservoirs' development in the Middle East. [ABSTRACT FROM AUTHOR]

This document is an editorial for a special issue of the journal Minerals, focusing on the heterogeneities of carbonate reservoirs. The editorial emphasizes the importance of understanding these heterogeneities for optimizing exploration and production strategies, as they influence fluid flow behavior and the recoverable reserves within the reservoir. The editorial also highlights the need for further research to explore the implications of heterogeneities at a broader scale and recommends the use of advanced technologies and multidisciplinary approaches. The document provides a summary of five papers included in the special issue, which cover topics such as the genetic mechanism of dolomite reservoirs, diagenetic alterations in the Chiltan Formation, the formation mechanism of dolomite-mottled limestone reservoirs, characteristics of crystalline dolomites in the Sanshanzi Formation, and facies variations in the Sarvak Formation. The research presented in this special issue contributes to our understanding of ancient carbonate platforms and dolomite reservoirs and provides a framework for future studies in oil and gas exploration. [Extracted from the article]

The analysis of the main factors of brittleness is an important basis for the selection of engineering desserts in shale oil reservoirs. In this study, with the shale oil reservoir of the Liushagang Formation in the X Depression of the Beibuwan Basin as the research object, a characterization and analysis of the main factors of brittleness of the reservoir was performed in order to further reveal the brittleness of shale reservoirs in the study area. The brittleness of reservoirs in the study area was controlled by both internal and external factors, and the main factors of brittleness in the target section included the maturity of organic matter, horizontal stress difference, and brittle minerals. As the maturity of organic matter increased, the density, elastic modulus, and hardness of casein increased and the differentially hardened internal structure occurred and significantly affected brittleness. The mineral composition of the reservoir was characterized by complex mineral types and high contents of brittle minerals, and the minerals determining brittleness were mainly quartz, feldspar, calcite, and dolomite. The horizontal stress difference of the shale oil section was relatively small and contributed to fracturing and reforming. This study clarified the brittleness characteristics of E2l shale and its main factors, and provided a basis for the selection of shale formation geo-engineering dessert layers in the study area. [ABSTRACT FROM AUTHOR]

The EN280 Leba Road is a mountain road that runs along the western slope of Serra da Leba (Humpata Plateau) and its outstanding escarpments, connecting the hinterland areas of the Province of Huila to the coastal Atlantic Province of Namibe, in Southwest Angola. In the Serra da Leba ranges, as in Humpata Plateau, a volcano-sedimentary succession of Paleo-Mesoproterozoic age known as the Chela Group outcrops extensively. This main unit records a pile of sediments with a thickness over 600 m, overlying a cratonic basement with Eburnean and pre-Eburnean granitoids. This sequence is overlain in unconformity by the Leba Formation, which consists of weakly deformed cherty dolostones rich in stromatolites. Along the EN280 Leba Road, in the downward direction, were inventoried and characterized eight sites that, by their exceptional geological content and the singularity of their geoforms, are worth being defined and formalized as geosites: (1) traditional mining clay pit in the Humpata Plateau (post-Eburnean Paleo-Mesoproterozoic claystones); (2) old lime oven of Leba (post-Eburnean Meso-Neoproterozoic cherty dolostones with stromatolites); (3) viewpoint of the Serra da Leba (post-Eburnean Paleo-Mesoproterozoic volcano-sedimentary formations and Eburnean Paleoproterozoic granitoids); (4) vertical beds at the beginning of the descent (post-Eburnean Paleo-Mesoproterozoic volcano-sedimentary formations); (5) slope of the fault propagation fold (post-eburnean Paleo-Mesoproterozoic volcano-sedimentary formations); (6) reverse fault in granitoid rocks (Eburnean Paleoproterozoic granitoids); (7) Dolerite Curve (Eburnean Paleoproterozoic granitoids and dolerites); (8) ductile simple shear zone (Eburnean Paleoproterozoic granitoids and mylonites). These sites were primarily selected using the results of fieldwork (observations, measurements, reproduction of representations, and creation of models), interpretation of remote sensing data, and data from previously published bibliographies and cartography. A quantitative assessment of the selected sites to be preserved through their classification as geosites (integration in a geoconservation strategy) was proposed. The first position in the numerical assessment is occupied by the landscape dimension geosite "Viewpoint of the Serra da Leba". This position is conferred, mainly, by its high geological, use, and Management values, being therefore considered the place with the highest geoheritage value in the studied area. Based on the previous characterization and evaluation, several field activities were proposed to be included in a guidebook, highlighting aspects such as landscapes, outcrops, rocks, structures, fossils, and georesources. The high scientific, didactic, and aesthetic values of these geological contexts and their high degree of geodiversity justify their integration into a geoeducational transect, contributing to the appreciation and awareness of the geological heritage of Serra da Leba, as well as to its promotion and scientific and educational dissemination. [ABSTRACT FROM AUTHOR]

The genesis of deep-to-ultra-deep dolomite reservoirs in the Tarim Basin is crucial for exploration and development. The Cambrian subsalt dolomite reservoirs in the Tarim Basin are widely distributed, marking significant prospects for ultra-deep reservoir exploration. Based on big data methodologies, this study collects and analyzes porosity and permeability data of carbonate reservoirs in the western Tarim Basin, specifically targeting the Cambrian deep-oil and gas-reservoir research. Through an examination of the sedimentary evolution and distribution of carbonate–evaporite sequences, and considering sedimentary facies, stratigraphic sediment thickness, fault zone distribution, and source-reservoir assemblages as primary reference factors, the study explores the macro-distribution patterns of porosity and permeability, categorizing three favorable reservoir zones. The controlling factors for the development of Cambrian carbonate reservoirs on the western part of the Tarim Basin are analyzed from the perspectives of sedimentary and diagenetic periods. Factors such as tectonic activity, depositional environment, microbial activity, and pressure dissolution are analyzed to understand the main causes of differences in porosity and permeability distribution. Comprehensive analysis reveals that the porosity and permeability of the Series2 carbonate reservoirs are notably high, with extensive distribution areas, particularly in the Bachu–Tazhong and Keping regions. The geological pattern of "Three Paleo-uplifts and Two Depressions" facilitated the formation of inner-ramp and intra-platform shoals, creating conducive conditions for the emergence of high-porosity reservoirs. The characteristics of reservoir development are predominantly influenced by diagenetic and tectonic activities. The Miaolingian is chiefly affected by diagenesis, featuring high permeability but lower porosity and smaller distribution range; dolomitization, dissolution, and filling processes under a dry and hot paleoclimate significantly contribute to the formation and preservation of reservoir spaces. In the Furongian, the Keping and Bachu areas display elevated porosity and permeability levels, along with substantial sedimentary thickness. The conservation and development of porosity within thick dolomite sequences are mainly governed by high-energy-particulate shallow-shoal sedimentary facies and various dissolution actions during diagenesis, potentially indicating larger reserves. [ABSTRACT FROM AUTHOR]

The use of mineral reinforcements in polymer matrix composites has emerged as an alternative for sustainable production, reducing waste and enhancing the physical and mechanical properties of these materials. This study investigated the impact of the melt flow index (MFI) of HDPE and the particle size of two mineral reinforcements, Bahia Beige (BB) and Rio Grande do Norte Limestone (CRN), on the composites. All composites were processed via extrusion, followed by injection, with the addition of 30 wt.% reinforcement. Chemical analyses revealed similar compositions with high CaO content for both minerals, while X-ray diffraction (XRD) identified predominantly calcite, dolomite, and quartz phases. Variations in the MFI, reinforcement type, and particle size showed a minimal influence on composite properties, supported by robust statistical analyses that found no significant differences between groups. Morphological analysis indicated that composites with lower MFI exhibited less porous structures, whereas larger particles of BB and CRN formed clusters, affecting impact resistance, which was attributed to poor interfacial adhesion. [ABSTRACT FROM AUTHOR]

This study investigates the impact of dissolved carboxymethyl cellulose (CMC) and agar on the dolomitization reaction of calcite at 200 °C. Previous studies have suggested that CMC and agar promote dolomite precipitation at room temperature. However, this study found that their decomposition products hinder the reaction at 200 °C, with uncertainty about their role at other temperatures. The inhibitory effect of the decomposition products could be attributed to their adsorption onto calcite surfaces, which hinders their dissolution. This results in a longer reaction induction period and replacement period. Regression analysis demonstrates that the 0.1 g/L agar and 0.2 g/L CMC series decrease the cation ordering rate of dolomite produced from synthetic calcite when compared with series without polysaccharides. In contrast, the 0.1 g/L CMC series shows a slight increase in the cation ordering rate compared with series without polysaccharides. The findings of this study suggest a notable potential impact of the decomposition products of polysaccharides on the ordering of dolomite, although it is uncertain whether they inhibit this ordering process. The inhibitory effect observed in the decomposition products of CMC and agar could also exist in the decomposition products of the extracellular polymeric substances (EPS) and bacteria cell walls found in sedimentary rocks during burial diagenesis. Therefore, further research is necessary to understand the role of EPS and bacteria cell walls in dolomitization, since their impact is not always predictable. [ABSTRACT FROM AUTHOR]

The Middle Atlas hosts calcite veins of considerable economic value, being found in the Mahdi and Bou Naceur ridges in the eastern part of the Moroccan Middle Atlas. In this study, we aim to identify the fundamental factors controlling mineralization, which could be essential for the exploration of calcite minerals. Jurassic dolomites and limestones host calcite deposits. Mineralization is controlled by the NE-SW sinistral fault system of the Mahdi Ridge as well as by the NW-SE dextral fault system of the Bou Naceur Ridge. These veins exhibit a Riedel shear system. The edges of the veins display different textures, such as banded and brecciated calcite. At the heart of the veins are deposits of massive, automorphic, pure crystalline calcite. Geochemical analyses revealed carbonate rock dissolution and carbonate fluid infiltration, indicating the presence of a low-temperature hydrothermal system. These mineralizations are a response to the evolution of the geodynamic uplift of the Middle Atlas during the Neogene, which occurred during the Alpine orogeny. [ABSTRACT FROM AUTHOR]

The synergistic effect of sodium dodecyl benzene sulfonate (SDBS) on the flotation separation of magnesite and dolomite using sodium oleate (NaOL) as a collector has been studied through flotation experiments, zeta potential measurements, contact angle measurements, Fourier transformation infrared spectroscopy analysis (FT-IR), particle size measurements and transmittance measurements. The flotation experiments show that when the synergist, SDBS, is added to the collector, NaOL, the collecting ability and ion resistance of NaOL can be improved so that the flotation separation of magnesite and dolomite can be realized. Zeta potential measurements, contact angle measurements and FT-IR analysis indicate that SDBS and NaOL can co-adsorb on the surface of magnesite. Particle size measurements and transmittance measurements show that SDBS can also improve the dispersion and solubility of NaOL in an aqueous solution, so as to achieve a synergistic effect. [ABSTRACT FROM AUTHOR]

Expansion damage in medium–low reactivity dolomite limestone poses significant challenges in construction and engineering projects. This study investigates the potential of fly ash in inhibiting expansion damage in such limestone formations based on RILEM AAR-5 method. Through a series of laboratory experiments, various proportions of fly ash instead of cement, respectively, were prepared and subjected to varying alkali content conditions immersion tests to simulate expansion conditions. The expansion rates and extents were monitored and compared between pure limestone samples and those mixed with different proportions of fly ash. Additionally, scanning electron microscopy (SEM) analysis was employed to investigate the microstructure of the dolomite limestone–fly ash mixtures to understand the inhibition mechanisms. Results indicate that fly ash demonstrates promising inhibitory effects on expansion damage in medium–low reactivity dolomite limestone across the addition of 40% fly ash and alkali content of 0.70%. The reaction products are calcite, brucite, and a mixture of Mg-Si-Al phases and the reaction area is within 100 μm from the boundary when the cement alkali content is 1.50% without any fly ash. However, no reaction products were found at the boundary after adding 40% fly ash when lowering the cement alkali content to 0.70%. This research contributes to a better understanding of the interaction between fly ash and dolomite limestone in inhibiting expansion damage, providing valuable insights for engineering applications. [ABSTRACT FROM AUTHOR]

It is beneficial in terms of the theoretical significance and application prospects to define the structure and reservoir development model of the lower Paleozoic unconformity in the Jiyang Depression of Bohai Bay Basin, China, for oil and gas exploration of unconformity in carbonate strata. Geological and geochemical evidence shows that a regional unconformity formed during the Huaiyuan Movement in the lower Paleozoic strata of the Jiyang Depression. Along the top of the regional unconformity between the Yeli Liangjiashan Formation and Fengshan Formation, various types of karst breccia have developed, showing prominent characteristics of development and vertical karst zonation. The paleokarst zone can be divided into the vadose zone and the underflow zone, and there are apparent differences between the two zones in terms of the mode of karst activity and type of reservoir space. Primitive sedimentary microfacies, dolomitization, and supergene karstification controlled the reservoirs of the Fengshan Formation and Yeli-Liangjiashan Formation. There are significant differences in the original physical properties due to the differences in the original sedimentary microfacies. The pore development of granular dolomite of high-energy beach facies has the best reservoir performance. In the later period, the superposition of dolomitization and supergene karstification resulted in apparent differences in karst development mode, development intensity, reservoir type, and reservoir physical properties. Among them, the granular dolomite reservoir has the best physical properties and has developed a cavity-type reservoir that has a planar distribution along an unconformity surface. [ABSTRACT FROM AUTHOR]

Seismic reflection data and implicitly sonic velocity are undoubtedly the most important source of information for large-scale subsurface characterization. Yet, deriving reservoir and fluid flow properties from acoustic data is still challenging in carbonates, which display large acoustic velocity variations that contest many of the conventional assumptions regarding wave propagation in porous media. In this comprehensive study on 370 carbonate samples (247 limestones and 123 dolomites), we re-evaluate the impact of mineral velocity on bulk rock acoustic properties of dolomite and limestone by assessing the link between sonic velocity and the rock's pore geometry. We quantify pore size and pore network complexity using parameters from both digital image analysis (DIA) and the extended Biot theory (EBT). We then compare DIA and EBT parameters to assess the impact of pore network geometry versus mineral velocity on the acoustic velocity of carbonate rocks. We explore the usefulness of EBT parameter γk in improving permeability estimates. Published values of velocity indicate that dolomites exhibit higher velocities than limestones at any given porosity. Our laboratory measurements of acoustic velocity, however, reveal that both dolomites and limestones show extreme variations in sonic velocities where samples with compressional velocity of ~5000 m/s may range in porosity from 5% to 25% and samples with porosity of ~20% may range in velocity from ~4000 m/s to 5700 m/s. Through the quantitative assessment of the pore network in our samples we document that pore network geometry has much more impact on the acoustic velocity of carbonates than variations in mineralogy, in this case dolomite and calcite. Most of the dolostone samples studied are dominated by small pores, resulting in relatively low velocities for their given porosity, while limestones with similar velocity–porosity values often possess simpler pore networks with larger pores. This pore size difference offsets the faster velocity of dolomite. The extended Biot theory parameter γk, captures this variation in pore size and internal geometry and exhibits a strong correlation to specific surface. Moreover, γk captures the impact of internal pore geometry on acoustic velocity, providing the basis for challenging existing assumptions regarding the importance of mineral velocity. By quantifying internal geometry, γk can improve permeability estimates in reservoir characterization and enhance evaluations of producibility and injectability. With that, it has direct implications on general geophysics, hydrocarbon exploration, and CCS initiatives. [ABSTRACT FROM AUTHOR]

Seventy-one pumping tests were carried out in various dolomites, revealing two of the less-studied hydrogeological parameters related to double-porosity flow: the interporosity flow coefficient λ and the ratio between storage in the fractures and storage in the whole system (ω). Conceptually, they are both tied to the flow properties of the fractures and matrix and define the communication between these two hydrogeological domains. Five different groups of dolomites were included in this study, with different diagenesis types, crystal sizes, bed thicknesses, fracture intensities and chert contents represented. The results of both parameters reflect variations in the sedimentological and resulting hydrogeological properties of dolomites. The largest values of the interporosity flow coefficient λ (6.53 × 10−1) are found in dolomites formed by late diagenesis, exhibiting the highest degree of fracturing, resulting in fast responses in fractures and large λ values. The values of the storage ratio ω also vary (the range of most values is from 3.32 × 10−4 to 2.14 × 10−1), with the overall range almost completely filling all the theoretical limits from zero to one. The greatest values of ω are found in dolomites with the largest storage, due to the large number of small fractures, and silica diagenesis probably reduces the matrix storage. The correlations among the parameters show some significant relationships, especially between λ and Km, λ and Sf, ω and Sf, and ω and Sm. [ABSTRACT FROM AUTHOR]

The hydrogeological conditions of Huainan Coalfield are complex. The Taiyuan formation limestone water (Taihui water) in this area is a direct threat to the water source of the 1# coal mining floor. In order to prevent and control water disasters, Gubei Coal Mine adopted ground high-pressure grouting with fly ash cement to block the hydraulic connection between the Taiyuan formation limestone aquifer and the Ordovician limestone aquifer. However, the injected slurry will destroy the original hydrochemical balance of Taihui water and change its hydrochemical characteristics. Taking the influence area of the 2# karst collapse column in the Beiyi 1# coal mining area of Gubei Coal Mine as an example, a total of 25 Taihui water samples were collected. The hydrochemical characteristics and evolution law of Taihui water before and after grouting are studied via the multivariate statistical method. The research methods include constant index statistics, Piper diagram, correlation analysis, ion combination ratio, and saturation index analysis. The results show that after grouting, the concentrations of Na+ + K+, Ca2+, Mg2+, and Cl− in Taihui water decrease, while the concentrations of SO42− and HCO3− increase. The average values of PH and TDS become larger. The hydrochemical types of Taihui water are more concentrated, mainly HCO3-Na and Cl-Na. The correlations between conventional indicators decrease. According to the analysis of ion combination ratio, dissolution, cation exchange, and pyrite oxidation mainly occur in Taihui water, and these effects are enhanced after grouting. The saturation index results show that after grouting, the saturation index of dolomite, calcite, and gypsum is significantly reduced, and the saturation index of rock salt is slightly increased. The conclusion of this study is that the hydrochemical characteristics of Taihui water are greatly affected by fly ash cement. Moreover, because fly ash cement contains a lower calcium oxide content than ordinary Portland cement, the effect of fly ash cement on the ion concentration of Taihui water and the resulting hydrogeochemical effect are significantly different. Therefore, in the treatment of mine water disasters, the hydrogeochemical evolution law affected by fly ash cement grouting should be identified. [ABSTRACT FROM AUTHOR]

The conductivity of acid-etched fractures and the subsequent production response are influenced by the injection mode of the fracturing fluid and acid fluid during acid fracturing in a carbonate reservoir. However, there has been a lack of comprehensive and systematic experimental research on the impact of commonly used injection modes in oilfields on conductivity, which directly affects the optimal selection of acid-fracturing injection modes. To address this gap, the present study focuses on underground rock samples, acid systems, and fracturing fluid obtained from ultra-deep carbonate reservoirs in the Fuman Oilfield. Experimental investigations were conducted to examine the conductivity of hydraulic fractures etched by various types of acid fluids under five different injection modes: fracturing fluid + self-generating acid or cross-linked acid; fracturing fluid + self-generating acid + cross-linked acid. The findings demonstrate that the implementation of multi-stage alternating acid injection results in the formation of communication channels, vugular pore space, and natural micro-cracks, as well as grooves and fish-scales due to enhanced etching effects. The elevation change, amount of dissolved rock, and conductivity exhibited by rock plates are significantly higher in comparison to those achieved through the single-acid injection mode while maintaining superior conductivity. It is recommended for optimal conductivity and retention rate in the Fuman Oilfield to adopt two stages of alternating acid-fracturing injection mode. Field application demonstrated that two-stages of alternating acid-fracturing generate more pronounced production response than the adjacent wells. [ABSTRACT FROM AUTHOR]

Nephrite is a very precious gemstone material. As a non-renewable resource, the discovery of new nephrite deposits and the study of the genesis of nephrite have aroused great interest. A new occurrence of nephrite known as Xinyu nephrite was discovered in Xinyu Country, Jiangxi province, China. Field investigations reveal that nephrite appears in a contact zone between the Mengshan composite granitic pluton and Permian carbonate rock. The carbonate rock is calcic marble that underwent diopsidization and tremolitization. Nephrites have a light yellow-green color, weak greasy luster, are slightly-translucent to translucent, and are fine-grained. Their refractive index (RI) ranges from 1.60 to 1.61, and their specific gravity (SG) value ranges from 2.90 to 2.91, falling within the range of nephrites from Xinjiang, China. Their Mohs hardness (Hm) ranges from 5.78 to 5.83. Petrographic observations and electron probe micro analyzer (EPMA) data indicated that analyzed nephrites mainly comprise tremolite, with minor diopside, calcite, quartz, and apatite. Tremolite has a ratio of Mg/(Mg + Fe2+) greater than 0.99. The tremolite grains show microscopic fibrous-felted and columnar textures. Scanning electron microscope (SEM) images show some tremolite fibers interwoven in different crystallographic orientations, and some arranged in parallel. Fourier transform infrared and Raman spectroscopy features reveal the bands of minerals typical for nephrite composition. The petrographic characteristics and geological background of the Mengshan area indicate that nephrite formed through a replacement of calcic marble, which differs from the two known types (D-type: dolomite-related; S-type: serpentinite-related). Mineral replacements were common in nephrite, including diopside by tremolite, calcite by tremolite, and recrystallization of coarse by fine tremolite grains. The discovery of Xinyu nephrite occurrence complements the resource and provides an updated case for the in-depth study of the diversity of nephrite deposits. [ABSTRACT FROM AUTHOR]

Mudstone compaction is widely used in the estimation of subsidence caused by sediment load, basin modeling, and overpressure genesis. The boundary for the depth at which chemical compaction in mudstones begins in the Xihu Depression is across two wells; in Well A, the depth is 2200 m, while in Well D, it is 1750 m. The porosity shows a gradual decreasing trend, followed by a sharp decrease and then an increase. Compared with Well A, the pores in Well D show a faster reduction (resulting in higher compaction) with increasing burial depth. The compaction process is controlled by clay mineral transformation and temperature increase. At a temperature range of 65–105 °C, local dissolution of quartz and pyrite, as well as precipitation of plagioclase, occur in Well D. The quartz, pyrite, and plagioclase contents in Well A do not significantly change, while K-feldspar corrosion and illitization are dominant. At a temperature range of 125–135 °C, diagenesis is reversed. The mixed layer increases across a low range, while chlorite and kaolinite contents increase; the dissolution of dolomite and the intermittent dissolution of calcite cause a local increase in pore size at 4460 m in Well A and 3300 m in Well D. The report values of geothermal gradient raise the depth limit of chemical compaction in Well D compared to that in Well A, thus accelerating the process of illitization and the cementation rate of quartz, and becoming the leading cause of the steeply decreasing trend of porosity in Well D. A compaction model for the Xihu Depression has also been established, which involves mechanical compaction, coexistence of chemical compaction and mechanical compaction, and chemical compaction. In the chemical compaction stage, the chemical/diagenetic compaction of mudstones locally increases the pore size. Moreover, abnormally enlarged pores became important reservoirs in the Xihu Depression. [ABSTRACT FROM AUTHOR]

Flotation separation of magnesite from dolomite in the presence of SSZS (sodium silicate modified with zinc sulfate) as an inhibitor and NaOL (sodium oleate) as a collector has been studied via flotation tests, zeta potential measurements, contact angle measurements, and Fourier transformation infrared spectroscopy analysis (FT-IR). The flotation tests show that NaOL has strong collecting capacity in magnesite and dolomite flotation, so it is difficult to separate two minerals via flotation without inhibitors. SSZS is used as the depressant, which can selectively inhibit dolomite flotation and has little depression effect on magnesite. Zeta potential measurements, contact angle measurements, and FT-IR analysis indicate that SSZS can adsorb strongly onto dolomite's surface and has a weak adsorption effect on magnesite. The adsorption of SSZS prevents NaOL from acting on the surface of dolomite. On the contrary, because there is little adsorption of SSZS onto magnesite, NaOL can still adsorb onto magnesite's surface. [ABSTRACT FROM AUTHOR]

Lacustrine sedimentary formations potentially contain hydrocarbons. The lacustrine sedimentary rocks of the Ziliujung and Xintiangou Formations have been investigated for their hydrocarbon potential using low-pressure nitrogen adsorption (LP-N2A), low-field nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), total organic carbon (TOC), rock-eval pyrolysis (Rock-Eval), gas chromatography (GC), gas chromatography–mass spectrometry (GC–MS), X-ray fluorescence spectrometry (XRF), and inductively coupled plasma mass spectrometry (ICP-MS). The results show that the normalized difference of the pore parameters between the two formations is less than 10%, and the pores are mainly slit-like mesopores with high porosity. Macropores and micropores are often developed in the quartz skeleton, while mesopores often occur among organic matter, clay minerals, carbonate minerals, and pyrite particles. The organic matter abundance of the Ziliujing Formation is relatively high. Additionally, the organic matter types of the two formations are mainly type II and type III, and the sources of the organic matter are plankton and bacteria which have reached the mature gas production stage. The palaeoenvironmental differences between the depositional periods of the two formations lie within 10% of each other. The warm and humid climate promotes the development of quartz minerals to further enhance the proportion of both micropores and macropores, and the clay minerals, carbonate minerals, and pyrite carried in the terrigenous detritus are closely associated with the total organic carbon (TOC), which promotes the development of mesopores to enhance the porosity. The reservoir, organic matter, and palaeoenvironmental characteristics of fine-grained sedimentary rocks in the two formations are similar, and both of them have good potential for development. The above results provide a basic geological theoretical basis for unconventional oil and gas exploration in the northeastern margin of the Sichuan Basin. [ABSTRACT FROM AUTHOR]

A total of 18 samples of shallow groundwater around the Hancheng mining area in the Guanzhong Basin were collected from 1–4 May 2018. According to the analysis of hydrochemical data, the Gibbs semi-logarithmic diagram and Piper diagram were used to research the hydrogeochemical behavior of shallow groundwater around the Hancheng mining area in the Guanzhong Basin. The results of the groundwater hydrochemical analyses shown on the Gibbs and Piper plots are as follows: The chemical composition analysis showed that the main cation components were Mg2+, Ca2+, Na+, and K+, the anion components were HCO3−, Cl−, and SO42−. A measure of 89% of the groundwater samples in this area were freshwater, the HCO3− were mainly dolomite, calcite, and gypsum dissolved precipitation resulted. Na+ and Cl− came from the dissolution of halite. Most of the groundwater was of the SO4·Cl-Ca·Mg type, accounting for 61.1%. The main ion chemistry of the shallow groundwater in this area is controlled by rock weathering, and pyrite oxidation is a significant factor affecting the SO42− concentration. These research results will help analyze the formation mechanism of chemical components and provide some basic data for the evolution of mine water in this area in the future. [ABSTRACT FROM AUTHOR]

The potential of the supercritical antisolvent micronization (SAS) technique was evaluated for the production of CaO-based particles with a size and a physical structure that could enable high performance for CO2 capture through the calcium looping process. Two sources of calcium derivative compounds were tested, waste marble powder (WMP) and dolomite. The SAS micronization of the derivate calcium acetate was carried out at 60 °C, 200 bar, a 0.5 mL min−1 flow rate of liquid solution, and 20 mg mL−1 concentration of solute, producing, with a yield of more than 70%, needle-like particles. Moreover, since dolomite presents with a mixture of calcium and magnesium carbonates, the influence of the magnesium fraction in the SAS micronization was also assessed. The micronized mixtures with lower magnesium content (higher calcium fraction) presented needle-like particles similar to WMP. On the other hand, for the higher magnesium fractions, the micronized material was similar to magnesium acetate micronization, presenting sphere-like particles. The use of the micronized material in the Ca-looping processes, considering 10 carbonation-calcination cycles under mild and realistic conditions, showed that under mild conditions, the micronized WMP improved CaO conversion. After 10 cycles the micronization, WMP presented a conversion 1.8 times greater than the unprocessed material. The micronized dolomite, under both mild and real conditions, maintained more stable conversion after 10 cycles. [ABSTRACT FROM AUTHOR]

The origin of the carbonatites that appear on Earth is one of the most controversial current topics in the petrogenesis of igneous rocks. Situated in the northern sector of the Basal Complex of Fuerteventura (Canary Islands), the Miocene Esquinzo ultra-alkaline plutonic rock complex is composed of pyroxenites, melteigites-ijolites-urtites, malignites-nepheline syenites, carbonatites, silicocarbonatites, nephelinites and nepheline phonolites. This work tries to establish the genesis of this massif of ultra-alkaline rocks with associated carbonatites from Fuerteventura (which are very rare in the oceans). The geochemical characteristics of these rocks and the minerals that are included in them have allowed us to establish their origin. This complex was generated by three successive magmatic events associated with differentiation of melanephelinite magmas emplaced in the oceanic crust. Silicocarbonatite and calciocarbonatite (sövites) dykes are related to the first magmatic event and were formed by fractional crystallization of H2O- and CO2-rich ijolite magmas. The melanephelinite magmas that formed these plutonic ultra-alkaline rocks were apparently generated as partial melts of asthenospheric mantle, which assimilated enriched lithospheric mantle material as they ascended. The upwelling of this large body of anomalous asthenospheric Miocene material exceeded the deformation associated with plate motions and led to an oceanic rifting event in Fuerteventura. [ABSTRACT FROM AUTHOR]

Featured Application: The findings of this study offer support for the design of laboratory experiments, monitoring indicators, and the selection of parameters for history matching, ultimately enhancing the accuracy of databases of mineral reactions induced by CO2 injection. Numerical simulation is a commonly employed technique for studying carbon dioxide (CO2) storage processes in porous media, particularly saline aquifers. It enables the representation of diverse trapping mechanisms and the assessment of CO2 retention capacity within the subsurface. The intricate physicochemical phenomena involved necessitate the incorporation of multiphase flow, accurate depiction of fluid and rock properties, and their interactions. Among these factors, geochemical reaction rates and mechanisms are pivotal for successful CO2 trapping in carbonate reactive rocks. However, research on kinetic parameters and the influence of lithology on CO2 storage remains limited. This limitation is partly due to the challenges faced in laboratory experiments, where the time scale of the reactions and the lack of in situ conditions hinder accurate measurement of mineral reaction rates. This study employs proxy models constructed using response surfaces calibrated with simulation results to address uncertainties associated with geochemical reactions. Monte Carlo simulation is utilized to explore a broader range of parameters and identify influential factors affecting CO2 mineralization. The findings indicate that an open database containing kinetic parameters can support uncertainty assessment. Additionally, the proxy models effectively represent objective functions related to CO2 injectivity and mineralization, with calcite dissolution playing a predominant role. pH, calcite concentration, and CO2 injection rate significantly impact dolomite precipitation, while quartz content remains unaffected. [ABSTRACT FROM AUTHOR]

Rockfalls can cause loss of life and material damage. In Northern Morocco, rockfalls and rock avalanche-deposits are frequent, especially in the Dorsale Calcaire morpho-structural unit, which is mostly formed by Jurassic limestone and dolostone formations. In this study, we focus exclusively on its northern segment, conventionally known as "the Haouz subunit". First, a rockfall inventory was conducted. Then, two datasets were prepared: one covering exclusively the source area and the other representing the entirety of the mass movements (source + propagation area). Two algorithms were then used to build rockfall susceptibility models (RSMs). The first one (Logistic Regression: LR) yielded the most unreliable results, where the RSM derived from the source area dataset significantly outperformed the one based on the entirety of the rockfall affected area, despite the lack of significant visual differences between both models. However, the RSMs produced using Artificial Neural Networks (ANNs) were more or less similar in terms of accuracy, despite the source area model being more conservative. This result is unexpected given the fact that previous studies proved the robustness of the LR algorithm and the sensitivity of ANN models. However, we believe that the non-linear correlation between the spatial distribution of the rockfall propagation area and that of the conditioning factors used to compute the models explains why modeling rockfalls in particular differs from other types of landslides. [ABSTRACT FROM AUTHOR]

Dolomite as a heterogeneous catalyst can be used in biodiesel synthesis. Process material costs can be reduced by regenerating and reusing the catalyst. Two methods of regeneration of dolomite were studied: (1) washing for 30 min with methanol, filtration, and washing for 30 min with hexane and (2) calcination at high temperature. Catalytic efficiency and catalyst changes after 1–6 cycles were evaluated. X-ray, FTIR, and SEM studies were performed. Calcination has been found to be a more effective method of catalyst regeneration than washing with solvents. The catalytic effectiveness of dolomite only slightly decreased over six application cycles. The results of the instrumental analysis showed that the structure and composition of the dolomite do not change during calcination after three cycles, while obvious changes in the structure of dolomite during catalyst washing were observed. [ABSTRACT FROM AUTHOR]

The equilibrium oxygen isotope fractionation factor is widely used in geological thermometry. However, under most natural conditions, the oxygen isotope exchange is rare to reach equilibrium. Especially for the complex water–rock interaction process, the contribution of the H2CO3 solution, CO32− solution, Ca(HCO3)2 solution, and CaCO3 solution to the equilibrium oxygen isotope fractionation factor of this process is poorly understood. In view of this predicament, these key parameters are obtained by ab initio calculations. The results showed that the contributions of different carbonate minerals and different aqueous solutions to the equilibrium oxygen isotope fractionation factor were different. Among all nine carbonate minerals (dolomite, calcite, aragonite, magnesite, siderite, otavite, smithsonite, ankerite, and strontianite), the minerals with the highest and lowest reduced partition function ratios (RPFR) were siderite and strontianite, respectively. At the same time, the RPFR of nitratine, which has the same structure as carbonate, was studied. The RPFRs of the three most widely distributed carbonates in nature (dolomite, calcite, and aragonite) were dolomite > calcite > aragonite. Among the H2CO3 solution, CO32− solution, Ca(HCO3)2 solution, and CaCO3 solution, the H2CO3 solution had the strongest ability to enrich 18O. In addition, the equilibrium oxygen isotope fractionation factors between aqueous solutions and gas phase species (CO2(g), H2O(g), and O2(g), etc.) were calculated systematically. The results showed that the oxygen isotope fractionation factors between solutions and gas phases were often inconsistent with the temperature change direction and that the kinetic effects played a key role. These theoretical parameters obtained in this study will provide key equilibrium oxygen isotope constraints for water-rock interaction processes. [ABSTRACT FROM AUTHOR]

Cenozoic dolomitization of reefal carbonates has been widely found on many tropical islands worldwide. However, most ages and geochemical data obtained from bulk samples prevent a clear understanding of the previous complex diagenetic processes of these island dolostones due to a lack of in situ age and fluid composition. In this study, one deep borehole penetrated Cenozoic carbonates on Meiji Island in the southern South China Sea and massive dolostones with thicknesses over 400 m were uncovered. The in situ U–Pb geochronology and elemental analysis were conducted on the lower Nanwan Formation (upper Miocene) comprising undolomitized calcite (bioclast), replacive dolomite, and dolomite cement. Strontium isotope ages and U–Pb dates show that the penecontemporaneous replacive dolomitization occurred at 11.0–8.5 Ma, close to the deposition of precursor limestone. The dolomite cement precipitated at 8.5–6.0 Ma. In situ elemental analyses indicate that the formation of replacive dolomite and dolomite cement in the Nanwan Formation was probably controlled by seawater. The higher Mg/Ca ratio and lower Mn and Sr contents in dolomite cements show that their fluid underwent more evaporation. The dolomite content is positively related to the porosity of reefal limestones in the Nanwan Formation, suggesting that primary voids play an important role in fluid transportation during following dolomitization. Coralline algae and lime mud with algal fragments are beneficial for the rapid nucleation of dolomite. This study demonstrates that in situ elemental analysis using laser ablation has great potential for identifying the source of multistage dolomitizing fluids and can help refine the existing dolomitization model of isolated atolls. [ABSTRACT FROM AUTHOR]

Microfacies studies were carried out on the Middle Miocene Marmarica Formation exposed at the Gabal Western Bahi El-Din and Gabal El-Najdeen, the Siwa Oasis, northwestern Desert (Egypt). It was distinguished into the lower, middle, and upper members. Eleven microfacies types were recognized, which include skeletal lime-mudstone, dolomitic lime-mudstone, intraclastic wackestone, bryozoan wackestone, foraminiferal wackestone, foraminiferal bryozoan packstone, glauconitic molluscan packstone, molluscan intraclastic packstone, pelletal peloidal skeletal packstone, dolostones, and claystone microfacies. This formation includes several types of emergence- meter-scale cycles (shallowing-upward). Field observations and petrographic analyses revealed that these cycles consist of pure carbonates and mixed siliciclastic carbonates. These cycles consist of four types of gradual cycles and six types of non-gradual cycles. The gradual emergence cycles indicate a balance between the rate of subsidence, sea level oscillations, and sedimentation rate. The non-gradual cycles indicate an irregular balance between sedimentation rate and subsidence rate. The non-gradual cycles denote high-frequency sea level variation and/or short-term sea level oscillations, which are associated with high carbonate formation. The depositional environments of the Marmarica Formation are restricted to lagoonal at the base, followed upward to open marine conditions. Both environments most probably characterize the platform setting. [ABSTRACT FROM AUTHOR]

Recently, a series of prolific fracture-vug reservoirs have been discovered in the lower Ordovician dolostone successions of the northern Tarim Basin. However, the genesis of these reservoirs remains unclear. In this study, observations on drilling cores and thin sections identify the pore space characterized by dissolved fractures, fissures, and vugs. Petrology, cathodoluminescence, and homogenization temperatures of fluid inclusions aid in establishing the diagenetic paragenetic sequence. Dissolving enlargement occurred after chemical compaction of overlying limestone and before the Permian volcanic activity. Breccia pores containing unique fillings of terrestrial materials (quartz sand and allogenic kaolinite) and calcite cements with negative δ18OPDB values (−18.4‰) along with 87Sr/86Sr ratios (up to 0.71026) indicate that the dissolving fluid originated from meteoric freshwater at the surface. The δ18OSMOW values of the calcite precipitating fluid (−2.1‰ to −8.7‰) further suggest freshwater as the source of the dissolving fluid, buffered by the Ordovician wall rocks or formation water. As the distance from the unconformity surface increases, both the homogenization temperature and δ18OPDB values of the breccia pore-filling calcite in the southern study area gradually elevate and deplete, respectively, indicating a rise in temperature during the infiltration of meteoric freshwater with increasing subsurface temperatures. The abnormal reflection bodies identified as reservoirs in seismic profiles along deep-seated strike-slip faults delineate these faults as the channel for the infiltration of meteoric freshwater. The penetrating strata of these faults and the high 87Sr/86Sr values of breccia pore-filling calcite suggest that karstification occurred during the Devonian period. Accordingly, we establish a deep karst model in which the Devonian meteoric freshwater penetrated along the strike-slip faults and dissolved the Ordovician dolostones, resulting in the development of deep buried karstic fault reservoirs in the southern region of the northern Tarim Basin. [ABSTRACT FROM AUTHOR]