Search

Fault detection in analog circuits is of great importance to predict the correct operation of the circuit. For this purpose, soft computing techniques such as those based on the application of fuzzy inference systems stand out. However, given the large variability that can exist in analog circuits due to component tolerance, the initial fuzzy inference system (FIS) may not be able to accurately diagnose the different hard faults. This study presents a methodology to diagnose and detect the faults that can occur in analog circuits, which is based on the development of a FIS, starting from a specific fault situation in the analog circuit, and subsequently on the optimization of the membership functions using an evolutionary algorithm so that the adjusted FIS can classify and predict different failure situations. To this end, the application of optimization techniques based on particle swarm optimization (PSO) will be analyzed to develop a FIS capable of predicting different faults. In addition, pattern search algorithm will also be analyzed. A Sallen-Key band-pass filter and a single stage of a small-signal amplifier are used as test circuits. The proposed methodology shows that it is possible to accurately predict the faults that could arise in the circuits under study. [ABSTRACT FROM AUTHOR]

This paper proposes a fast protection scheme of a hybrid AC/DC distribution network based on features extraction of the decomposed signals. The signal decomposition is achieved using discrete wavelets transform (DWT). The proposed scheme offers three main functions, fast fault detection for both network sides, AC fault classification with the ability to identify the faulted phase/ phases, and protection coordination between AC and DC sides. In addition, the scheme is based on local measurement so no need for extra-cost for communication infrastructure. The absence of communication reduces the overall cost and, as a most important feature, it reduces the fault clearing time. The system is thoroughly analyzed under many types of faults in both AC and DC sides. Also, different disturbance conditions are considered which used in threshold determination. The simulation results show that the proposed protection scheme was not only able to protect the system but also it offers a generalized fast acting communication-less approach. [ABSTRACT FROM AUTHOR]

The low fault current contribution from inverter-interfaced distributed generators (IIDGs) and bidirectional flow of current in the power networks introduces protection challenges when islanded. The existing fault detection scheme based on the transient monitoring function (TMF) fails under such scenarios. A new decentralised machine learning (ML) based fault detection and classification scheme is proposed in this paper using terminal voltage information of IIDG (v o−abc). TMF of v o−abc , along with the zero sequence component of v o−abc , is utilised for training and testing of ensemble bagged trees ML algorithm. The proposed scheme is implemented inside each IIDG, and hence, it does not require communication. It is validated on a modified CIGRE test benchmark microgrid for all shunt faults at various locations with different loading, fault resistances, and inception angles. The accuracy of detection and classification of fault (DCF) during fault cases with unbalanced loads, noise, harmonic loads, and no-fault scenarios such as load and DG switching proves the effectiveness of the proposed method with varying scenarios. The performance of the proposed scheme is found to be superior when compared with the existing threshold based TMF and Hilbert–Huang transform (HHT) based techniques considering accuracy, dependability, security, and response time. • Queries by all the reviewer 3 are addressed in details. • Made suitable changes to the introduction to bring in more clarity. [ABSTRACT FROM AUTHOR]

Currently, microgrids are becoming more prevalent. Therefore, it is crucial to develop robust and reliable microgrid protection schemes. Researchers have recently explored various approaches to microgrid protection, including adaptive protection and AC microgrid protection. The study offers insights into fault detection and localization in microgrid protection, utilizing precise measurements from the point of common coupling (PCC). It distinguishes between fault occurrences and overload cases, addressing various challenges. Additionally, the analysis explores the role of Linear Discriminant Analysis (LDA) within the framework of multi-machine learning techniques, shedding light on its application in microgrid protection. Ultimately, the aim is to bolster microgrid resilience and reliability for end-users and stakeholders. The system model being tested has been created using Matlab/Simulink software and is based on a real system. The training and testing of the algorithms are developed and evaluated using MATLAB tools. The accuracy of the proposed method is demonstrated in the paper, indicating that it can be used to modernize the current protection apparatus in preparation for the eventual implementation of an advanced microgrid station protection system. • High Accuracy in Fault Identification: DTE and ANN models achieve 100% validation accuracy. • Efficient Overload Differentiation: Superior performance in managing faults and overloads. • Enhanced Fault Localization: Leveraging LDA for improved accuracy in fault localization. • Innovative Voltage Signature Signal: Novel composition enhances signal representation. • Promising Role of LDA: Proficient in fault localization, offering valuable insights. [ABSTRACT FROM AUTHOR]

Modeling and recognizing events in complex systems through machine learning techniques is a challenging task. Especially if the model is constrained to be explainable and interpretable, while ensuring high levels of accuracy. In this paper, we adopt a bilinear logistic regression model in which the parameters are trained in a data-driven fashion on a real-world dataset of power grid failure data. The bilinear white-box model – grounded on a specific neural architecture – has been proven effective in classifying faulty states with a performance comparable to several classifiers in technical literature. Additionally, the low computational complexity of the bilinear model, in terms of the number of free parameters, allows gaining insights into the fault phenomenon correlating the events that impact the power grid (exogenous causes) with its constitutive characteristics, thence eliciting the relational information hidden in the data. The proposed model is also able to estimate a vulnerability vector that can be associated, as a suitable characteristic "label", to power grid components, opening the way, as will be deeply demonstrated in the following, not only to predictive maintenance programs or condition monitoring tasks but also to risk assessment and scenario analyses in line with the explainable AI paradigm. • Introduced a bilinear logistic regression model trained on real-world power grid failure data for grid reliability assessment. • Emphasized the role of explainable AI in power grid analysis, highlighting the interpretability of the proposed model. • Developed a method to estimate a vulnerability vector for power grid components and a deep analysis related to the computed weight correlation matrix. • Stressed the importance of semantic specification in modeling complex systems. [ABSTRACT FROM AUTHOR]

• Existing PV fault detection techniques detect faults after occurrence. • Our proposed technique detect fault before occurrence. • Our proposed technique forecast fault based on solar cell parameters. • Deep learning-based transformer algorithm with U-Net classifier are used to predict faults. • Four faults with different severity levels are detected before occurrence. According to the US-based National Renewable Energy Lab (NREL), solar energy losses due to faults were 3.5 % in 2004, which increased to 17.5 % in 2018. Therefore, the fault prediction mechanism will enable PV practitioners to reduce losses effectively, enhancing the solar system's efficiency and power output. This paper proposes a deep learning-based Transformer model for robust fault prediction in photovoltaic. Transformer uses attention mechanism that considers data points as a language units "word" and learn dependencies among them to predict upcoming data points. Unlike other forecasting algorithms, our proposed approach does not rely on previous trends. In case of PV faults, trends do not exist. The proposed algorithm utilizes rate of change of solar cell parameters for establishing a trend to forecast faults, enabling proactive fault mitigation. It also classifies faults with different severity levels to identify the level of predictive maintenance required. The proposed approach is extensively evaluated using MATLAB on datasets of several faults with low, medium, and high severity levels. The proposed Transformer model achieves a forecasting mean average error (MAE) of 0.09377. Performance of the proposed forecasting and classification algorithm is compared with existing machine learning-based regression and classification techniques such as KNN, SVM, and NN, where proposed approach outperforms state-of-the-art approaches. [ABSTRACT FROM AUTHOR]

• Detection and classification of faults including high impedance faults in microgrid. • Fault detection and classification from current signals at the substation. • Faulty feeder and sub-feeder identification within half cycle of post fault current signal. • Wavelet based power spectral density of current signals utilized to detect and classify fault and also identify faulty feeder. • Performance of the proposed algorithm verified under dynamic and challenging situations. The recent progress in the area of microgrid protection has led to the application of data-driven and signal processing techniques for fault detection in microgrids. The deployment of inverter interfaced distributed generators makes the traditional protection schemes ineffective. In this paper a wavelet based power spectral density (PSD) has been utilized to detect fault, identify faulty phases and locate fault in the microgrid. Wavelet based PSD decouples the frequency information from the time information and it is the optimal technique to reveal the change of distribution of harmonics in non-stationary faulty signals as for fault analysis it can consider the faulty frequency band instead of one particular harmonic. The proposed technique can detect fault and identify faulty phases by analyzing current signals from the substation only. The normalized value of PSD of three phase current signals has been considered for fault detection and probabilistic distribution of PSD has been considered for faulty phase identification. The normalized value of PSD of the current signals collected from both ends of the main feeders and one end of the non-DG sub-feeder have been used to locate the faulty feeder and sub-feeder. Appropriate threshold values have been considered to detect fault and to locate the faulty feeder. To locate faults, the technique does not require synchronized signals and thus provides a promising and economical solution for inverter interfaced microgrid. It does not require huge amount of data set for training and testing as it is essentially a threshold based technique and also does not require collection of data at high sampling rate. The proposed scheme has been extensively tested for high impedance fault (HIF), unbalanced loading, load switching, variation of DG parameters, measurement uncertainty and presence of noise in the signal with signal to noise ratio up to 10 dB. This technique provides accurate results for fault resistance from 0 Ω to 300 Ω and up to 10% measurement error. The performance of the proposed technique has been verified for feeder length variation up to 20%. Half cycle of current signal only after fault is required and three levels of wavelet decomposition has been considered. The simulation results and comparative assessment demonstrate the efficacy of the proposed scheme. [ABSTRACT FROM AUTHOR]

• Detecting the high resistance internal fault and identifying the correct faulted phase in shunt-compensated lines using phase currents only. • No symmetrical component and frequency-domain analysis are required which reduces the computational burden. • Validation of the proposed algorithm with filed data obtained from a 400 kV line. • Independent of compensation level, fault location, line length and its parameters. The proposed method performs correctly for time synchronization errors, variation in fault location, CT saturation, source impedance variations, different line lengths and power swing, etc. Static synchronous compensators (STATCOMs) are used in the power transmission line to improve the voltage profile and stability. For a fault on the line, additional uneven reactive current from the compensator causes the maloperation of local data-based relaying schemes. In this work, using the current of both ends of the line, internal faults and faulty phases are identified by the ratio of both end's current difference to the local one. Both the magnitude and angle of the ratio are utilized to enhance the dependability and security of the relay operation. The performance of the proposed technique is validated in Western System Coordinating Council (WSCC), a 9-bus system using data obtained from PSCAD. The authenticity of the proposed method is further validated using field data collected from a 400 kV shunt compensated line in the Indian power grid. The suggested strategy is resilient to changes in fault resistance, source impedance, fault location, current transformer saturation, various compensation levels, and high resistance faults (HRF). A comparison of the proposed Algorithm with existing methodologies demonstrates its superiority. [ABSTRACT FROM AUTHOR]