Search

Effectively utilizing low-grade thermal energy is a promising approach to mitigating greenhouse gas emissions while reducing the burden on centralized power grids. Current thermoacoustic heat pumps and power generators face challenges such as high onset temperature differentials and low performance. This paper addresses these challenges by introducing a gas-liquid resonator into a thermoacoustic combined heat and power systems to recover low-grade thermal energy in residential buildings. Through Sage modeling and calculations, the internal characteristics of the proposed system and its output performance under different operating conditions are explored. At a heating temperature of 350 °C, the system can generate 6.4 kW of output thermal power, 0.9 kW of electricity, and overall exergy efficiency is 79.3 %. Combining neural network models with case studies conducted in Spain and Finland, the system can annually save 5.6 MWh and 20.7 MWh in fuel energy, reduce emissions of 1374 kg and 5180 kg of carbon dioxide, and save a total cost of €611 and €2324, respectively. Furthermore, comparisons with other emerging micro-CHP systems highlight the efficiency of the proposed system. These results indicate the high potential of thermoacoustic combined heat and power systems in recovering low-grade thermal energy and achieving energy savings and emission reductions. • Introducing an innovative thermoacoustic micro-CHP system. • Achieving an exergy efficiency of 79.3 % under standard operating conditions. • One system can annually reduce household CO 2 emissions by 5180 kg. • Ideal for households, balancing lower output levels for both heat and electricity. [ABSTRACT FROM AUTHOR]

• We present a novel integration for reducing CO 2 emissions in blast furnaces. • It combines top gas recycling, oxy-fuel regime, power to gas and biomass pyrolysis. • The integration was modelled using the extended operating line methodology. • The best performance was found for pyrolysis at 700 °C. • The CO 2 emissions were reduced by 58% (9.8 MJ/kg CO2 energy consumption) The paper introduces a novel approach for mitigating CO 2 emissions in blast furnaces by integrating top gas recycling, an oxy-fuel regime, power to gas, and biomass pyrolysis. Various case studies were conducted, involving the adjustment of pyrolysis temperatures (300 °C, 500 °C, 700 °C, and 900 °C) and varying the quantity of blast furnace gas directed to methanation for carbon recycling. Pinus radiata, abundant and cost-effective in Chile and Spain, was chosen as the biomass source. The integration was modeled using the extended operating line methodology and evaluated through 12 key performance indicators, such as flame temperature, coke consumption, CO 2 emissions, and specific primary energy consumption per unit of CO 2 avoided. Optimal performance was observed with pyrolysis at 700 °C and no blast furnace gas recycled through methanation. This configuration achieved a 58 % reduction in CO 2 emissions, with an energy consumption of 9.8 MJ/kg CO2 , and obviated the need for geological storage. Comparing this innovative proposal with other oxygen blast furnace approaches from the literature revealed a 13 percentage point improvement in CO 2 reduction over the second-best alternative. Additionally, the required electrolysis capacity, influencing capital expenditure, was 57 % lower, and energy consumption was reduced by 44 %. [ABSTRACT FROM AUTHOR]