Search

• The proposed auxetic honeycomb possesses more excellent auxetic behavior and specific energy absorption than the conventional honeycomb. • The interaction between the structural parameters is analyzed. • The multi-objective optimization of the enhanced auxetic honeycomb (EAH) was investigated. • The theoretical model and Box-Behnken Design model were used to predict the mechanical properties of EAH. In response to the challenge of low stiffness and energy absorption capacity, various designs of negative Poisson's ratio (NPR) structures have emerged. However, these designs often lack a comprehensive analysis of other mechanical properties, leading to subpar mechanical performance. Previous studies have explored the mechanical properties response of enhanced re-entrant honeycombs (ERH) under impact conditions, revealing limitations in optimizing the structure's performance with a single objective. Therefore, this study aims to enhance ERH structural parameters to achieve superior mechanical performance through theoretical derivations and geometric optimizations. The results demonstrate that the proposed theoretical model is consistent with finite element analysis and response surface (RS) predictions. Expressions for Young's modulus, specific energy absorption, and compressive strength are proposed, facilitating the identification of structural parameters that meet specific requirements during reverse design. Furthermore, a multi-objective optimization approach optimizes the geometric parameters based on maximum energy absorption and compressive strength. The mechanical behavior of the optimized ERH is investigated using the finite element method, revealing the energy absorption capacity of 13.78 J/g while maintaining Poisson's ratio at -1.06. Additionally, the deformation mode of the optimized structure showcases enhanced stability compared to traditional honeycomb structures. The theoretical model and RS method were used to guide the design of ERH and promote the application of NPR structures. [ABSTRACT FROM AUTHOR]

• Innovative metamaterial design approach proposed to improve energy absorption capacity. • Varying the structural parameter (D/d) enhanced the metamaterial auxetic effect. • HPH metamaterials absorb energy effectively horizontally with their honeycomb structure. • HPH metamaterials show excellent reusability at lower compression ratios. Hexagonal perforated honeycomb (HPH) metamaterials were designed, fabricated and investigated in this work. Initially, the mechanical properties and deformation modes of various proposed HPH metamaterials (HPH-U, HPH-1 L and HPH-3 L) under quasi-static vertical compression were analyzed using experimental and finite element methods. The findings reveal significant improvements in mechanical properties and energy absorption due to the honeycomb and hierarchical expandable design. Notably, the auxetic effect is diminished. Subsequently, the impact of key dimensional parameters on the mechanical properties and Poisson's ratio behavior was explored. The results highlighted that an increase of elliptical perforation major axis to minor axis ratio enhanced the auxetic effect but compromised load-bearing and absorptive capacity. Additionally, HPH metamaterials displayed exceptional performance under quasi-static horizontal compression, with their honeycomb structure enabling them to withstand both vertical and horizontal impacts while exhibiting excellent energy absorption capabilities. The study also identified relative density as a crucial factor influencing horizontal impact performance. Finally, the study subjected the HPH metamaterials to multiple quasi-static vertical repetitive compressions, meticulously analyzing variations in mechanical properties under diverse compression ratios. Due to distinctive structural design and impressive mechanical properties, HPH metamaterials demonstrate immense potential for applications in automotive engineering and sports protection fields. [Display omitted] [ABSTRACT FROM AUTHOR]

• Effects of heating and cooling thermal shock on thermally induced vibration (TIV) are explored. • Influence of geometric nonlinearity under heating/cooling thermal shock forms is revealed. • The TIV characteristics of sandwich beams with auxetic honeycomb cores are discussed and compared with traditional honeycomb. • The instability conditions of the clamped beam with immovable ends under heating thermal shock are given. The nonlinear thermally induced vibration (TIV) characteristics of sandwich beams with auxetic honeycomb cores under general boundary conditions are studied. Based on first-order shear deformation theory, the dynamic governing equations are obtained through Hamilton principle, in which geometric nonlinearity and temperature dependence are considered. The temperature field along the thickness is calculated by finite element method and nonlinear TIV responses are solved via Newton-Raphson-Newmark method. The effects of temperature dependency, thermal shock forms, geometric nonlinearity, thicknesses of beam and face-sheet, boundaries and honeycomb geometrical parameters are studied. Results show that the reduction of the absolute inclined angle of the auxetic honeycomb can weaken the TIV responses. The influence of geometric nonlinearity on quasi-static and dynamic responses depends on the thermal shock form. Thermal buckling is the necessary condition for the occurrence of the TIV in clamped beams with immovable ends. Moreover, the research provides some design references to suppress the TIV responses of the sandwich beam with auxetic honeycomb core. [ABSTRACT FROM AUTHOR]

Auxetic lattice structures are known for their superior stiffness-to-density and strength-to-density ratios. Re-entrant hourglass exhibits an acceptable equivalent elastic modulus and remarkable energy absorption capacity among various auxetic configurations due to their flexibility and hinge deflecting during crushing loads. This study introduces a curved hourglass honeycomb which can be produced using 3D printing with pure or reinforced filaments incorporating continuous fibers. New closed-form formulations are analytically derived using an energy method by considering an extracted unit cell to predict the equivalent in-plane mechanical properties for the first time. The plateau stress of the proposed honeycomb is evaluated at the densification state of a unit cell using the energy conservation theory, equating external work with plastic energy dissipation. The accuracy of these extended relations is validated against experimental outcomes, demonstrating good agreement between analytical and experimental results. Additionally, robust linear and nonlinear finite element analyses are conducted to assess the accuracy of the obtained relations, including the equivalent stiffness and plateau stress for structures produced with reinforced filaments. The nonlinear finite element code employs appropriate subroutines to model plasticity/damage events. Based on the established analytical relations for stiffness and plateau stress, multi-objective optimization using Genetic Algorithm is applied to define optimum values for the Pareto front chart's objective functions of stiffness and plateau stress. The optimization process involves exploring the design space and defining the values of geometrical parameters to achieve the desired objectives. In conclusion, this study presents a novel approach to developing curved re-entrant honeycomb structures, with analytical formulations validated against experimental and numerical results. Optimization helps to identify optimal configurations concerning stiffness and plateau stress, offering potential applications in lightweight and high-strength materials design. According to the obtained results, for selection of the best value for curved strut angle which results in the optimum value of stiffness and plateau stress, a range between 10°-34° can be considered depending on the volume fraction of fibers. [ABSTRACT FROM AUTHOR]

Recently, auxetic metamaterials have turned into an area of growing interest, because of their deformation uniqueness, design flexibility, and functional diversity. To achieve their programmable design of densification and energy absorption, the variable stiffness factor method (VSF) emerged. However, the energy absorption capacity of the metamaterials designed by this method has a significant reduction. In this work, to remedy this defect, several different lightweight specimens are proposed and fabricated to extend the stage of energy absorption and retain the tunability. Then quasi-static compression tests and finite element methods are carried out to analyze the mechanical properties of the designed boundary-constrained structure (BCS) and X-shape constrained structure (XCS). The accuracy of the densification points and energy absorption capacity of the two structures at different VSF values are also studied. The results show that the densification points of the designed structures can be adjusted quantitatively, and their deformation modes are more stable than conventional structures during compression. Furthermore, their specific energy absorption is four and five times higher than that of non-lightweight structures with VSF = 40%, respectively. These findings contribute to advancing the implementation of auxetics in applications of multistage protective structures. • A lightweight metamaterial based on the variable stiffness factor (VSF) method is proposed. • The proposed structures realize multi-level energy absorption and stable deformation. • The SEA of proposed structures was 4 and 5 times higher than that of VSF = 40% structure. [ABSTRACT FROM AUTHOR]