Search

Compared to cast-in-situ construction, prefabricated construction reduces the generation of construction waste; however, construction waste cannot be entirely eliminated through prefabrication and can be generated at each stage of its life cycle. This paper generates a system dynamics model, comprising two causal-loop diagrams and one stock-flow diagram, to simulate the effectiveness of policies on decarbonizing prefabricated concrete building waste. The model can predict the annual and total construction waste, along with the associated carbon emissions, under different policy scenarios in China by 2030. This paper focuses on prefabricated concrete buildings in China, with specific attention to the wastage of concrete, bricks, mortar, and metal. In single-factor scenario simulations, increasing landfilling fee is the most effective policy for waste decarbonization, potentially reducing carbon emissions by 31%. Increasing prefabrication rate and enhancing regulation degree at the design phase of prefabrication can directly reduce prefabricated building waste generation, subsequently resulting in an 18% and 7% carbon emissions reduction. Multi-factor scenario simulations demonstrate that the simultaneous application of all four policies is most effective, achieving a 44% reduction in carbon emissions. This research establishes a theoretical framework for prefabricated concrete building waste management and provides the Chinese government with practical insights on optimizing policies for waste decarbonization in the dynamic landscape of prefabrication. • This paper develops the prefabricated building waste generation and disposal systems. • The model predicts the construction waste and associated carbon emissions by 2030. • Raising landfill fee is an effective policy for decarbonizing construction waste by 31.06%. • Prefabrication rate reaching 100% can reduce 18.04% of carbon emissions from waste. • Applying all policies is most effective, achieving a 44.34% carbon emissions reduction. [ABSTRACT FROM AUTHOR]

Innovative emission reduction technologies combined with optimized processes can effectively reduce the environmental pressure in the iron and steel industry (ISI). Identifying and comparatively analyzing the carbon emissions (CE) from steel productions is conducive to achieving China's ambitious carbon reduction targets. In this paper, we investigated two innovative routes: the shaft furnace-induction furnace-basic oxygen furnace route (SF-IF-BOF) and shaft furnace-electric smelting furnace-basic oxygen furnace route (SF-ESF-BOF), alongside two traditional routes: the blast furnace-BOF route (BF-BOF) and SF-electric arc furnace route (SF-ESF). The analysis was based on a functional unit of 1000 kg of crude steel (CS). By establishing the mass and energy balance models and decision criteria, 12 typical smelting scenarios for these routes were analyzed and compared in terms of materials consumption and CE. The results showed that increasing the proportion of scrap was beneficial for reducing CE. Under the condition of a 50% scrap ratio, the CE of the SF-IF-BOF, SF-ESF-BOF, BF-BOF, and SF-EAF routes were 768, 823, 946, and 870 kg, respectively. The SF-IF-BOF route displayed the most significant advantage of CE reduction. In addition, by using 100% zero-carbon electricity substitution, the SF-EAF route exhibited the greatest CE reduction effect of 41% (from 870 to 510 kg/t). While deploying 100% biomass fuels to replace coal, the CE of the BF-BOF route reduced by 80%. Finally, after introducing biomass fuels and zero-carbon electricity, the CE of the SF-IF-BOF route was minimized to a significantly low 13 kg/t (from 768), nearing zero CE. This research is expected to provide a novel solution for further CE reduction in the future of ISI, contributing to environmental sustainability and carbon reduction goals. • Suggestions for solutions to reduce CO2 emissions in the steel industry are provided. • Emissions of the SF-IF-BOF and SF-ESF-BOF compared to the BF-BOF and DRI-EAF routes. • DRI is considered to be generated using COG zero reforming process. • Using zero-C electricity and biomass can reduce CO2 emissions for the steel industry. [ABSTRACT FROM AUTHOR]

Mitigating greenhouse gas emissions is a significant global challenge, and precise prediction of carbon emissions holds the utmost importance for China to attain its dual carbon goal. To overcome the limitations of existing studies using a single forecasting method, based on quadratic exponential smoothing, multiple linear regression, and Gaussian process regression models, this paper constructs a carbon emission combination forecasting model with the generalized induced ordered weighted average (GIOWA) operator and analyzes carbon emission reduction performance. Empirical testing utilizing China's carbon emission data from 1980 to 2020 reveals the following findings: (1) The GIOWA combination forecasting model significantly enhances the accuracy of carbon emission forecasts, with an average accuracy exceeding 99.5% over the sample period, surpassing various single forecasting methods. (2) The carbon emission reduction target can be achieved under three different scenarios of low, average, and high GDP growth rates. Specifically, under the low growth rate scenario, China can achieve a 60% reduction in carbon intensity by 2025 and a 65% reduction by 2030. This study offers valuable decision support for the development of effective carbon reduction policies. [ABSTRACT FROM AUTHOR]

Substituting renewable energy for coal power under the carbon neutrality goal is an inevitable path for power system transformation, while the high share of renewable energy leads to a rapid rise in system flexibility demand. Currently, coal-fired power is still one of the most economical and reliable large-scale flexible resources in China. Therefore, the issue of how to mitigate the conflict between cleanliness and flexibility for coal-fired power is urgent to be solved. Accordingly, this paper established an optimization framework for the retirement and technology adoption of coal-fired power units with high spatial-temporal resolution, and the regional carbon emission budget is estimated from a top-down perspective. Secondly, a dynamic carbon quota allocation method considering technological innovation and adoption is proposed. The carbon trading cost of the units is evaluated from a bottom-up perspective, to realize the interaction between the obligatory policy constraints of the top-level target and the flexible incentives of the market mechanism. Finally, the empirical analysis was conducted in the Beijing-Tianjin-Hebei region of China. The optimal solution achieved by proposed method results in a substantial 27% reduction in total costs while keeping the increase in carbon emissions below 3%. By analyzing the dynamic evolution path of coal and the scale of diffusion of multi-type technologies, the differences in the roles coal power assuming at various stages of decarbonization are discussed. The robustness of the model and the validity of the proposed method were verified by comparing the dynamic/static carbon quota allocation. Overall, this study provides an effective optimization model for investigating the low-carbon technology adoption timing for coal power in Beijing-Tianjin-Hebei region, and offers valuable insights for other coal-dominated emerging economies seeking for power system transformation roadmap in the forthcoming net-zero carbon age. • A decision-making optimization model of CCPs low-carbon technology is proposed. • A dynamic CET system with upper-lower layer interaction is introduced. • The proposed dynamic CET system results in 27% reduction in total costs. • The high-resolution data of coal power in Beijing-Tianjin-Hebei region are used. • The strategy to solve the conflict between cleanliness and flexibility is given. [ABSTRACT FROM AUTHOR]

The significant carbon emissions generated by China's sludge treatment industry cannot be ignored. However, with only a few recent well-executed studies on carbon emission reduction in the sludge treatment field, the literature awaits a more comprehensive assessment and prediction whether the sludge treatment industry can achieve the dual-carbon target. This article aims to fill this gap, holistically examining the carbon emission reduction potential in the industry. Using the moving average method and IPCC method, the projected carbon emission value of sludge treatment in China from 2021 to 2030 indicates a total net carbon emission of 0.3 million tons by 2030. This suggests that the sludge treatment industry is on track to meet the carbon peak target, leaving surplus carbon quotas or credits available to assist other industries for carbon emissions reductions. The study also finds that only incineration and composting demonstrate the potential to be able to partially offset carbon emissions through resource utilization in certain stages or processes. Therefore, the current sludge treatment methods do not yield comprehensive emission reduction effects and cannot provide sufficient contribution to China's dual carbon goals. To address this issue, the paper explores a new scheme that focuses on improving the sludge treatment process. The scheme comparative analysis reveals that, even with all sludge treatment methods optimized, the total net carbon emissions of the industry could only be reduced to 0.058 million tons. This reduction falls short of significantly mitigating carbon emissions to achieve the carbon neutrality goal. Therefore, industries unable to achieve substantial net carbon reduction may need to explore alternative measures, such as carbon sinks, to ultimately attain carbon neutrality. [ABSTRACT FROM AUTHOR]