Search

The adverse effects of the frequent reservoir earthquakes (REs) and the severe degradation of the hydrofluctuation belt (HFB) on the long-term stability of bedding bank slope since the Three Gorges Reservoir Area (TGRA) impoundment were considered fully in this paper. Under such complex conditions, the dynamic response pattern and instability mechanism of typical bank slopes were investigated systematically by using a method of combining field survey, laboratory shaking table (ST) model test, and Universal Distinct Element Code (UDEC) numerical exploration. The research shows that the degradation forms of the HFB of typical bank slopes in the key field survey of the TGRA can be arranged into four types: erosion (denudation), corrosion (suffosion), avalanche (collapse), and slip (flow). The dynamic response of slope shows obvious characteristics of "surface effect" and "elevation effect," and the cumulative displacement (CD), damping ratio (DR) and natural frequency (NF) of slopes show a trend of gradually increasing, and increasing and decreasing, respectively. Meanwhile, the "S–type" cubic function and "Steep rise type" exponential function can be used to characterize the cumulative damage degree (CDG) of slope at the excitation stages of microseisms—small seisms and strong seisms, respectively. Subsequently, the dynamic evolvement process for cumulative damage and unstable failure of slope considering the impact of degradation of rock mass in the HFB was obtained, and there are good agreement between the model test and numerical exploration results. Furthermore, fully considering the influence of slope height (SH), slope angle (SA), thickness of bedding plane (TBP), dip angle of bedding plane (DABP), dynamic load amplitude (DLA), dynamic load frequency (DLF), height of water level of the HFB (HWHB), degradation range of the HFB (DRHB), and degradation shape of the HFB (DSHB), the CD of slope subjected to continuous excitation of multiple seismic loads increases in the form of exponential function, the dynamic stability coefficient (DSC) of slope decreases slowly first and then drops sharply, and the response degree of slope deformation and sliding velocity is obviously different. Especially, the sensitivity level of every preceding factor to the dynamic stability of slope based on the orthogonal analysis method (OAM) is in the order of DLA > DRHB > SA > SH > DLF > HWHB > DSHB > DABP > TBP. [ABSTRACT FROM AUTHOR]

The deformation of long–short supporting piles in soil–rock combined strata, which involves the cooperative working effect, is not easy to be analyzed by the theoretical method, and the deformation mechanism is not precise. Therefore, the deformation and mechanical characteristics of long–short supporting piles are investigated in this work by numerical simulation and field monitoring. The results show that for deep excavation in soil–rock combined strata, the lateral deflection curve converges rapidly below the excavation face, and the maximum point is located near the soil–rock interface. The bending moment of long and short piles increase simultaneously at each excavation stage, showing a remarkable cooperative working mechanism. The ratio number of long piles has a more significant impact on the internal force of the pile beneath the weathering line. Parameter analysis indicates the soil thickness and the rock deformation modulus have a considerable influence on the stability of deep excavation and the internal force of the supporting structure. For a given soil thickness, the embedded depth of long piles should be increased with increased softness and weathering of the underlying rock mass. Meanwhile, for deep excavation with thin overlying soil and hard rock mass, as described in this paper, the design of long–short supporting piles tends to be safe. The diameter of supporting piles and the number of short piles can be optimized to meet a reliable and economical design requirement, provided that the performance of the supporting structures can meet the design requirement in practice. [ABSTRACT FROM AUTHOR]